Case SR200 Skid Steer Loader Specs

Category: Skid Steer Loaders ➔
Manufacturer: Case ➔
Model: SR200 ➔

The Case SR200 is a skid steer loader designed for construction, landscaping, agriculture, and material handling tasks. It is part of Case's SR series and is known for its radial-lift design, which supports strong digging and grading performance. The SR200 typically features a compact frame, high maneuverability, and compatibility with a wide range of attachments, including buckets, forks, augers, and grapples. It is commonly used in confined job sites where versatility and efficient operation are important. The model is recognized for combining lifting capability, operator visibility, and service accessibility in a compact skid steer platform.

Dimensions

Case SR200 Skid Steer Loader Dimensions specifications
Clearance At Max Lift And Dump	8.21 ft (2.50 m)
Ground Clearance	8.00 in (20.32 cm)
Height To Top Of Cab	6.57 ft (2.00 m)
Length W/O Bucket	8.76 ft (2.67 m)
Length With Bucket	10.83 ft (3.30 m)
Reach At Max Lift And Dump	20.30 in (51.56 cm)
Turning Radius From Center - Inc Bucket	79.91 in (202.97 cm)
Turning Radius From Center - Machine Rear	62.90 in (159.77 cm)
Wheelbase	3.71 ft (1.13 m)
Width Over Tires	5.35 ft (1.63 m)

Engine

Case SR200 Skid Steer Loader Engine specifications
Aspiration	Turbocharged
Displacement	195.00 cu in (3,195.48 cu cm)
Engine Make	2239
Engine Model	432T/M3
Gross Power	74.00 hp (55.18 kw)
Max Torque	203.00 lbs ft (275.23 nm)
Net Power	70.00 hp (52.20 kw)
Number Of Cylinders	4
Power Measured @	2500 rpm
Torque Measured @	1400 rpm

Hydraulic

Case SR200 Skid Steer Loader Hydraulic specifications
Pump Flow Capacity	8.20 gpm (31.04 lpm)
Pump Type	Gear
Relief Valve Pressure	3000 psi

Loader

Case SR200 Skid Steer Loader Loader specifications
Bucket Capacity	0.6 cu yd
Bucket Width	66.00 in (167.64 cm)
Operating Load Rating	2,000.00 lbs (907.19 kg)
Tipping Angle	4000 degrees

Operational

Case SR200 Skid Steer Loader Operational specifications
Alternator Supplied Amperage	95 amps
Chain Box Fluid Capacity - Each Side	1.80 gal (6.81 l)
Engine Oil Fluid Capacity	2.70 gal (10.22 l)
Fuel Capacity	20.00 gal (75.70 l)
Hydraulic System Fluid Capacity	5.30 gal (20.06 l)
Max Speed	11.90 mph (19.15 kph)
Operating Speed	7.20 mph (11.59 kph)
Operating Voltage	12 V
Operational Weight	6,900.00 lbs (3,129.79 kg)
Tire Size	10 x 12.5

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon