Case SV185 Skid Steer Loader Specs

Category: Skid Steer Loaders ➔
Manufacturer: Case ➔
Model: SV185 ➔

The Case SV185 is a skid steer loader designed for construction, landscaping, agriculture, and material handling applications. It is part of Case's SV Series and is known for its vertical-lift design, which supports improved reach and lift height for loading tasks. The SV185 is typically used with buckets, forks, grapples, and other hydraulic attachments. It features a compact frame for maneuverability in confined job sites and is available with cab or canopy configurations depending on market and specification. The model is commonly referenced for its balance of lifting performance, versatility, and compatibility with a wide range of skid steer attachments.

General Specifications

Case SV185 Skid Steer Loader General Specifications specifications
ENGINE POWER HP (KW)	60 (44.7) — Starting 2019 Model Year
OPERATING LOAD LBS. (KG)	1,850 (840) — Starting 2019 Model Year
OPERATING WIDTH IN. (CM)	64.6 (164) — Starting 2019 Model Year
Rated Operating Capacity LBS (KG) 50%	1,850 (840) — Starting 2020 Model Year

Dimensions

Case SV185 Skid Steer Loader Dimensions specifications
Clearance at Max Lift and Dump	7.90 ft (2.41 m)
Ground Clearance	7.00 in (17.78 cm)
Height - Top of Cab	6.50 ft (1.98 m)
Length w/o Bucket	8.90 ft (2.71 m)
Length with Bucket	10.90 ft (3.32 m)
Reach at Max Lift and Dump	30.80 in (78.23 cm)
Turning Radius from Center - inc bucket	79.60 in (202.18 cm)
Turning Radius from Center - machine rear	62.90 in (159.77 cm)
Wheelbase	3.80 ft (1.16 m)
Width Over Tires	5.40 ft (1.65 m)

Engine

Case SV185 Skid Steer Loader Engine specifications
Aspiration	Turbocharged
Displacement	135.00 cu in (2,212.26 cu cm)
Engine Model	ISM N844T/M3
Gross Power	57.00 hp (42.51 kw)
Max Torque	126.00 lbs ft (170.83 nm)
Number of Cylinders	4
Power Measured @	2900 rpm
Torque Measured @	1800 rpm

Hydraulic System

Case SV185 Skid Steer Loader Hydraulic System specifications
Pump Flow Capacity	9.60 gpm (36.34 lpm)
Pump Type	Gear
Relief Valve Pressure	3000 psi

Loader

Case SV185 Skid Steer Loader Loader specifications
Bucket Capacity	0.60 cu yd (0.46 cu m)
Bucket Width	66.00 in (167.64 cm)
Operating Load Rating	1,850.00 lbs (839.15 kg)
Operating Width	64.07 in (162.74 cm)
Tipping Angle	3700 degrees

Operating Specifications

Case SV185 Skid Steer Loader Operating Specifications specifications
Alternator Supplied Amperage	95 amps
Chain Box Fluid Capacity - each side	1.80 gal (6.81 l)
Engine Oil Fluid Capacity	2.30 gal (8.71 l)
Fuel Capacity	20.00 gal (75.70 l)
Hydraulic System Fluid Capacity	4.30 gal (16.28 l)
Max Speed	11.50 mph (18.51 kph)
Operating Speed	7.40 mph (11.91 kph)
Operating Voltage	12 volts
Operating Weight	6,500.00 lbs (2,948.35 kg)
Tire Size	10 x 16.5

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon