Caterpillar 216 Skid Steer Loader Specs

Category: Skid Steer Loaders ➔
Manufacturer: Caterpillar ➔
Model: 216 ➔

The Caterpillar 216 Skid Steer Loader is a versatile and reliable machine designed for efficient performance in a variety of construction and agricultural applications. With a powerful Caterpillar engine, hydraulic capabilities, and a compact design, the 216 offers impressive lifting and operating capacities while maintaining maneuverability and ease of use. From its operational weight to its hydraulic flow and loader capacity, the Caterpillar 216 is built to handle tough tasks with precision and efficiency.

Cab

Caterpillar 216 Skid Steer Loader Cab specifications
FOPS	SAEJ/ISO 3449 APR98 Level I and ISO3449:1992 Level I
FOPS Level II	SAEJ/ISO 3449 APR 98 Level II and ISO 3449:1992 Level II (optional)
ROPS	SAE J1040 MAY94 and ISO3471:1994

Dimensions

Caterpillar 216 Skid Steer Loader Dimensions specifications
Bucket Pin Height - Carry Position	9.30 in (23.62 cm)
Bucket Pin Height - Maximum Lift	9.40 ft (2.87 m)
Bumper Overhang - Rear Axle	38.00 in (96.52 cm)
Clearance at Max Lift and Dump	7.20 ft (2.19 m)
Clearance at Maximum Lift and Dump	85.40 in (216.92 cm)
Ground Clearance	7.70 in (19.56 cm)
Length - With Bucket on Ground	127.00 in (322.58 cm)
Length - Without Bucket	99.00 in (251.46 cm)
Length w/o Bucket	8.30 ft (2.53 m)
Length with Bucket	10.90 ft (3.32 m)
Maximum Overall Height	146.00 in (370.84 cm)
Reach - Maximum Lift/Dump	20.00 in (50.80 cm)
Reach at Max Lift and Dump	21.50 in (54.61 cm)
Turning Radius from Center - inc bucket	79.40 in (201.68 cm)
Vehicle Width over Tires	60.00 in (152.40 cm)
Wheel Base	3.30 ft (1.01 m)
Wheelbase	3.30 ft (1.01 m)
Width Over Tires	6.10 ft (1.86 m)

Engine

Caterpillar 216 Skid Steer Loader Engine specifications
Bore	3.40 in (8.64 cm)
Displacement	134.00 cu in (2,195.87 cu cm)
Engine Make	Caterpillar
Engine Model	Cat 3024C
Net Flywheel Power	48.00 hp (35.79 kw)
Number of Cylinders	4
Power Measured @	3000 rpm
Stroke	4.00 in (10.16 cm)

Hydraulic

Caterpillar 216 Skid Steer Loader Hydraulic specifications
Hydraulic Flow	Standard flow
Loader Hydraulic Flow	14.70 gpm (55.64 lpm)
Loader Hydraulic Pressure	3100 psi
Pump Flow Capacity	15.20 gpm (57.53 lpm)

Loader

Caterpillar 216 Skid Steer Loader Loader specifications
Bucket Capacity	0.50 cu yd (0.38 cu m)
Operating Load Rating	1,400.00 lbs (635.03 kg)
Tipping Angle	2600 degrees

Operational

Caterpillar 216 Skid Steer Loader Operational specifications
Breakout Force - Lift Cylinder	2,873.00 lbs (1,303.17 kg)
Breakout Force - Tilt Cylinder	3,612.00 lbs (1,638.38 kg)
Fuel Capacity	17.20 gal (65.10 l)
Hydraulic System Fluid Capacity	14.60 gal (55.26 l)
Max Speed	7.00 mph (11.27 kph)
Operating Speed	7.00 mph (11.27 kph)
Operating Weight	5,740.00 lbs (2,603.62 kg)
Rated Operating Capacity	1,400.00 lbs (635.03 kg)
Rated Operating Capacity with Optional Counterweight	1,500.00 lbs (680.39 kg)
Tipping Load	2,800.00 lbs (1,270.06 kg)

Service Refill Capacities

Caterpillar 216 Skid Steer Loader Service Refill Capacities specifications
Chain Box - Each Side	1.60 gal (6.06 l)
Cooling System	2.40 gal (9.08 l)
Engine Crankcase	2.10 gal (7.95 l)
Fuel Tank	17.00 gal (64.35 l)
Hydraulic System	14.50 gal (54.88 l)
Hydraulic Tank	9.20 gal (34.82 l)

Weights

Caterpillar 216 Skid Steer Loader Weights specifications
Operating Weight	5,490.00 lbs (2,490.23 kg)

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon