Categories ↠ Skid Steer Loaders ↠ Caterpillar 216B II

Caterpillar 216B II Skid Steer Loader

Category: Skid Steer Loaders ➔
Manufacturer: Caterpillar ➔
Model: 216B II ➔

The Caterpillar 216B II Skid Steer Loader is a versatile and powerful machine designed for various construction and landscaping tasks. With a rated operating capacity of 1400 lbs and a gross power of 51 hp, this skid steer loader offers efficient performance and reliability on the job. Featuring a compact design with a maximum reach of 50.4 inches and a turning radius of 76.4 inches, the Caterpillar 216B II is suitable for tight spaces and challenging work environments. Equipped with a hydraulic system flow capacity of 15.6 gpm and a loader hydraulic pressure of 3335 psi, this machine ensures smooth and precise operation for enhanced productivity.

See all Caterpillar 216B IIs for sale

Cab

FOPS	SAE J1043 SEPT87 ISO 3449:1992 Level I
FOPS Level II	SAE J231 JAN81 ISO 3449:1992 Level II
ROPS	SAE J1040 MAY94 ISO 3471:1994

Dimensions

Bucket Pin Height - Carry Position	9.30 in (23.62 cm)
Bucket Pin Height - Maximum Lift	9.40 ft (2.87 m)
Bumper Overhang - Rear Axle	38.00 in (96.52 cm)
Clearance at Max Lift and Dump	7.10 ft (2.16 m)
Clearance at Maximum Lift and Dump	85.00 in (215.90 cm)
Departure Angle	26 degrees
Ground Clearance	8.00 in (20.32 cm)
Height - Top of Cab	6.50 ft (1.98 m)
Length - With Bucket on Ground	127.00 in (322.58 cm)
Length - Without Bucket	99.00 in (251.46 cm)
Length w/o Bucket	8.30 ft (2.53 m)
Length with Bucket	10.60 ft (3.23 m)
Maximum Dump Angle	40 degrees
Maximum Overall Height	146.00 in (370.84 cm)
Maximum Reach - With Arms Parallel	50.40 in (128.02 cm)
Rack Back Angle - Maximum Height	96.7 degrees
Reach - Maximum Lift/Dump	20.00 in (50.80 cm)
Reach at Max Lift and Dump	20.00 in (50.80 cm)
Turn Radius from Center - Bucket	76.40 in (194.06 cm)
Turn Radius from Center - Coupler	47.20 in (119.89 cm)
Turn Radius from Center - Rear	58.50 in (148.59 cm)
Turning Radius from Center - inc bucket	76.40 in (194.06 cm)
Turning Radius from Center - machine rear	58.50 in (148.59 cm)
Vehicle Width over Tires	60.00 in (152.40 cm)
Wheel Base	3.30 ft (1.01 m)
Wheelbase	3.30 ft (1.01 m)
Width Over Tires	5.00 ft (1.52 m)

Engine

Bore	3.30 in (8.38 cm)
Displacement	134.00 cu in (2,195.87 cu cm)
Engine Make	Caterpillar
Engine Model	Cat C2.2
Gross Power - SAE J1995	51.00 hp (38.03 kw)
Net Flywheel Power	47.00 hp (35.05 kw)
Net Power - SAE 1349	47.00 hp (35.05 kw)
Stroke	3.90 in (9.91 cm)

Hydraulic System

Hydraulic Flow	Standard
Hydraulic Power	30.40 hp (22.67 kw)
Loader Hydraulic Flow	15.60 gpm (59.05 lpm)
Loader Hydraulic Pressure	3335 psi
Pump Flow Capacity	15.60 gpm (59.05 lpm)
Relief Valve Pressure	3335 psi

Loader

Breakout Force	4083 psi
Operating Load Rating	1,400.00 lbs (635.03 kg)
Tipping Angle	2800 degrees

Operating Specifications

Breakout Force - Tilt Cylinder	4,083.00 lbs (1,852.02 kg)
Chain Box Fluid Capacity - each side	1.60 gal (6.06 l)
Cooling System Fluid Capacity	2.60 gal (9.84 l)
Engine Oil Fluid Capacity	2.60 gal (9.84 l)
Fuel Capacity	15.40 gal (58.29 l)
Hydraulic System Fluid Capacity	14.50 gal (54.88 l)
Max Speed	7.00 mph (11.27 kph)
Operating Weight	5,609.00 lbs (2,544.20 kg)
Rated Operating Capacity	1,400.00 lbs (635.03 kg)
Rated Operating Capacity with Optional Counterweight	1,500.00 lbs (680.39 kg)
Tipping Load	2,800.00 lbs (1,270.06 kg)

Power Train

Travel Speed Forward	7.00 mph (11.27 kph)
Travel Speed Reverse	7.00 mph (11.27 kph)

Service Refill Capacities

Chain Box - Each Side	1.60 gal (6.06 l)
Cooling System	2.60 gal (9.84 l)
Engine Crankcase	2.60 gal (9.84 l)
Fuel Tank	15.40 gal (58.29 l)
Hydraulic System	14.50 gal (54.88 l)
Hydraulic Tank	9.20 gal (34.82 l)

Weights

Operating Weight

5,609.00 lbs (2,544.20 kg)

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon