Category : Skid Steer Loaders ➔ Manufacturer : Caterpillar ➔ Model : 226 ➔
The Caterpillar 226 is a compact skid steer loader designed for material handling, grading, loading, and general construction tasks. Part of Caterpillar's skid steer lineup, the 226 features a rigid frame, lift arms, and a small turning radius for operation in confined spaces. It is commonly used in landscaping, agriculture, site preparation, and utility work. The machine is typically equipped with a diesel engine, hydraulic attachment capability, and a cab or canopy configuration depending on specification. The Caterpillar 226 is recognized for its maneuverability, attachment versatility, and suitability for light to medium-duty jobsite applications.
Cab
Caterpillar 226 Skid Steer Loader Cab specifications
Fops
SAEJ/ISO 3449 APR98 Level I and ISO3449:1992 Level I
Fops Level Ii
SAEJ/ISO 3449 APR 98 Level II and ISO 3449:1992 Level II (optional)
Rops
SAE J1040 MAY94 and ISO3471:1994
Dimensions
Caterpillar 226 Skid Steer Loader Dimensions specifications
Bucket Pin Height - Carry Position
9.00 in (22.86 cm)
Bucket Pin Height - Maximum Lift
9.34 ft (2.85 m)
Bumper Overhang - Rear Axle
38.00 in (96.52 cm)
Clearance At Max Lift And Dump
7.12 ft (2.17 m)
Clearance At Maximum Lift And Dump
85.00 in (215.90 cm)
Ground Clearance
8.00 in (20.32 cm)
Height
6.42 ft (1.96 m)
Height - Top Of Cab
6.42 ft (1.96 m)
Height To Top Of Cab
6.40 ft (1.95 m)
Length
10.67 ft (3.25 m)
Length - With Bucket On Ground
127.00 in (322.58 cm)
Length - Without Bucket
99.00 in (251.46 cm)
Length W/O Bucket
8.27 ft (2.52 m)
Length With Bucket
10.61 ft (3.23 m)
Maximum Overall Height
146.00 in (370.84 cm)
Reach - Maximum Lift/Dump
20.00 in (50.80 cm)
Reach At Max Lift And Dump
21.50 in (54.61 cm)
Turning Radius From Center - Inc Bucket
79.38 in (201.63 cm)
Vehicle Width Over Tires
60.00 in (152.40 cm)
Weight
5,822.00 lbs (2,640.82 kg)
Wheel Base
3.24 ft (0.99 m)
Wheelbase
3.24 ft (0.99 m)
Width
5.00 ft (1.52 m)
Width Over Tires
6.01 ft (1.83 m)
Engine
Caterpillar 226 Skid Steer Loader Engine specifications
Bore
3.90 in (9.91 cm)
Displacement
183.00 cu in (2,998.84 cu cm)
Engine Make
2236
Engine Model
Cat 3034C
Gross Power
58.00 hp (43.25 kw)
Net Flywheel Power
41.00 hp (30.57 kw)
Net Power
55.00 hp (41.01 kw)
Number Of Cylinders
4
Power Measured @
2600 rpm
Stroke
4.00 in (10.16 cm)
Hydraulic
Caterpillar 226 Skid Steer Loader Hydraulic specifications
Pump Flow Capacity
15.20 gpm (57.53 lpm)
Hydraulic System
Caterpillar 226 Skid Steer Loader Hydraulic System specifications
Hydraulic Flow
Standard flow
Loader Hydraulic Flow
15.10 gpm (57.15 lpm)
Loader Hydraulic Pressure
3300 psi
Loader
Caterpillar 226 Skid Steer Loader Loader specifications
Bucket Capacity
0.5 cu yd
Operating Load Rating
1,500.00 lbs (680.27 kg)
Tipping Angle
2710 degrees
Operating Specifications
Caterpillar 226 Skid Steer Loader Operating Specifications specifications
Breakout Force - Lift Cylinder
3,136.00 lbs (1,422.22 kg)
Breakout Force - Tilt Cylinder
3,903.00 lbs (1,770.07 kg)
Rated Operating Capacity
1,500.00 lbs (680.27 kg)
Rated Operating Capacity With Optional Counterweight
1,600.00 lbs (725.62 kg)
Tipping Load
3,000.00 lbs (1,360.54 kg)
Operational
Caterpillar 226 Skid Steer Loader Operational specifications
Fuel Capacity
15.90 gal (60.18 l)
Hydraulic System Fluid Capacity
14.60 gal (55.26 l)
Max Speed
6.90 mph (11.10 kph)
Operating Speed
6.90 mph (11.10 kph)
Operational Weight
5,830.00 lbs (2,643.99 kg)
Service Refill Capacities
Caterpillar 226 Skid Steer Loader Service Refill Capacities specifications
Chain Box - Each Side
1.60 gal (6.06 l)
Cooling System
2.60 gal (9.84 l)
Engine Crankcase
2.40 gal (9.08 l)
Fuel Tank
17.00 gal (64.35 l)
Hydraulic System
14.50 gal (54.88 l)
Hydraulic Tank
9.20 gal (34.82 l)
Weights
Caterpillar 226 Skid Steer Loader Weights specifications
Operating Weight
5,645.00 lbs (2,560.09 kg)
