All Equipment Category Specs ↠ Skid Steer Loaders ↠ Caterpillar 226B II

Caterpillar 226B II Skid Steer Loader

Category: Skid Steer Loaders (See all Skid Steer Loaders for sale)
Manufacturer: Caterpillar (See all Caterpillar Equipment for sale)
Model: 226B II (See all Caterpillar 226B II for sale)

Cab

FOPS	SAE J1043 SEPT87, ISO 3449:1992 Level I
FOPS Level II	SAE J231 JAN81, ISO 3449:1992 Level II
ROPS	SAE J1040 MAY94, ISO 3471:1994

Dimensions

Bucket Pin Height - Carry Position	9 in (24 cm)
Bucket Pin Height - Maximum Lift	9 ft (3 m)
Bumper Overhang - Rear Axle	38 in (97 cm)
Clearance at Max Lift and Dump	7 ft (2 m)
Clearance at Maximum Lift and Dump	85 in (216 cm)
Departure Angle	26 degrees
Ground Clearance	8 in (20 cm)
Height - Top of Cab	7 ft (2 m)
Length - With Bucket on Ground	127 in (323 cm)
Length - Without Bucket	99 in (251 cm)
Length w/o Bucket	8 ft (3 m)
Length with Bucket	11 ft (3 m)
Maximum Dump Angle	40 degrees
Maximum Overall Height	146 in (371 cm)
Maximum Reach - With Arms Parallel	50 in (128 cm)
Rack Back Angle - Maximum Height	96.7 degrees
Reach - Maximum Lift/Dump	20 in (51 cm)
Reach at Max Lift and Dump	20 in (51 cm)
Turn Radius from Center - Bucket	76 in (194 cm)
Turn Radius from Center - Coupler	47 in (120 cm)
Turn Radius from Center - Rear	59 in (149 cm)
Turning Radius from Center - inc bucket	76 in (194 cm)
Turning Radius from Center - machine rear	59 in (149 cm)
Vehicle Width over Tires	60 in (152 cm)
Wheel Base	3 ft (1 m)
Wheelbase	3 ft (1 m)
Width Over Tires	5 ft (2 m)

Engine

Bore	3 in (8 cm)
Displacement	134 cu in (2,196 cu cm)
Engine Make	Caterpillar
Engine Model	Cat C2.2 T
Gross Power - SAE J1995	61 hp (45 kw)
Net Flywheel Power	56 hp (42 kw)
Net Power - SAE 1349	56 hp (42 kw)
Number of Cylinders	4
Power Measured @	2600 rpm
Stroke	4 in (10 cm)

Hydraulic System

Hydraulic Flow (1)	Standard
Hydraulic Flow (2)	High Flow
Hydraulic Power	30 hp (23 kw)
Loader Hydraulic Flow	16 gpm (59 lpm)
Loader Hydraulic Pressure	3335 psi
Maximum Loader Hydraulic Flow	26 gpm (98 lpm)
Maximum Loader Hydraulic Pressure	3335 psi
Pump Flow Capacity	16 gpm (59 lpm)
Relief Valve Pressure	3335 psi

Loader

Breakout Force	4083 psi
Bucket Capacity	0 cu yd (0 cu m)
Operating Load Rating	1,500 lbs (680 kg)
Tipping Angle	3000 degrees

Operating Specifications

Alternator Supplied Amperage	85 amps
Breakout Force - Tilt Cylinder	4,083 lbs (1,852 kg)
Chain Box Fluid Capacity - each side	2 gal (6 l)
Cooling System Fluid Capacity	3 gal (10 l)
Engine Oil Fluid Capacity	3 gal (10 l)
Fuel Capacity	15 gal (58 l)
Hydraulic System Fluid Capacity	15 gal (55 l)
Max Speed	8 mph (13 kph)
Operating Voltage	12 volts
Operational Weight	5,822 lbs (2,641 kg)
Rated Operating Capacity	1,500 lbs (680 kg)
Rated Operating Capacity with Optional Counterweight	1,600 lbs (726 kg)
Tipping Load	3,000 lbs (1,361 kg)

Power Train

Travel Speed Forward	8 mph (13 kph)
Travel Speed Reverse	8 mph (13 kph)

Service Refill Capacities

Chain Box - Each Side	2 gal (6 l)
Cooling System	3 gal (10 l)
Engine Crankcase	3 gal (10 l)
Fuel Tank	15 gal (58 l)
Hydraulic System	15 gal (55 l)
Hydraulic Tank	9 gal (35 l)

Weights

Operating Weight

5,822 lbs (2,641 kg)

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon