Categories ↠ Skid Steer Loaders ↠ Caterpillar 236B II

Caterpillar 236B II Skid Steer Loader

Category: Skid Steer Loaders ➔
Manufacturer: Caterpillar ➔
Model: 236B II ➔

The Caterpillar 236B II Skid Steer Loader boasts impressive performance and versatility with its Caterpillar engine delivering a gross power of 75 hp. This machine is designed for efficiency and ease of use, with a loader operating load rating of 1950 lbs and a breakout force of 5484 psi. With its compact dimensions and advanced hydraulic system, the Caterpillar 236B II is built to handle various tasks with precision and power.

See all Caterpillar 236B IIs for sale

Cab

FOPS	SAE J1043 SEPT87 ISO 3449:1992 Level I
FOPS Level II	SAE J231 JAN81 ISO 3449:1992 Level II
ROPS	SAE J1040 MAY94 ISO 3471:1994

Dimensions

Bucket Pin Height - Carry Position	10.00 in (25.40 cm)
Bucket Pin Height - Maximum Lift	10.20 ft (3.11 m)
Bumper Overhang - Rear Axle	41.00 in (104.14 cm)
Clearance at Max Lift and Dump	7.90 ft (2.41 m)
Clearance at Maximum Lift and Dump	94.00 in (238.76 cm)
Departure Angle	28 degrees
Ground Clearance	9.30 in (23.62 cm)
Height - Top of Cab	6.90 ft (2.10 m)
Length - With Bucket on Ground	138.00 in (350.52 cm)
Length - Without Bucket	110.00 in (279.40 cm)
Length w/o Bucket	9.20 ft (2.80 m)
Length with Bucket	11.50 ft (3.51 m)
Maximum Dump Angle	40 degrees
Maximum Overall Height	156.00 in (396.24 cm)
Maximum Reach - With Arms Parallel	53.00 in (134.62 cm)
Rack Back Angle - Maximum Height	97.4 degrees
Reach - Maximum Lift/Dump	21.00 in (53.34 cm)
Reach at Max Lift and Dump	21.00 in (53.34 cm)
Turn Radius from Center - Bucket	83.00 in (210.82 cm)
Turn Radius from Center - Coupler	52.00 in (132.08 cm)
Turn Radius from Center - Rear	64.00 in (162.56 cm)
Turning Radius from Center - inc bucket	83.00 in (210.82 cm)
Turning Radius from Center - machine rear	64.00 in (162.56 cm)
Vehicle Width over Tires	66.00 in (167.64 cm)
Wheel Base	3.80 ft (1.16 m)
Wheelbase	3.80 ft (1.16 m)
Width Over Tires	5.50 ft (1.68 m)

Engine

Bore	3.70 in (9.40 cm)
Displacement	201.00 cu in (3,293.81 cu cm)
Engine Make	Caterpillar
Engine Model	Cat C3.4 DIT
Gross Power - SAE J1995	75.00 hp (55.93 kw)
Net Flywheel Power	71.00 hp (52.95 kw)
Net Power - SAE 1349	71.00 hp (52.95 kw)
Number of Cylinders	4
Power Measured @	2600 rpm
Stroke	4.70 in (11.94 cm)

Hydraulic System

Hydraulic Flow	Standard
Hydraulic Power	42.80 hp (31.92 kw)
Loader Hydraulic Flow	22.00 gpm (83.27 lpm)
Loader Hydraulic Pressure	3335 psi
Pump Flow Capacity	22.00 gpm (83.27 lpm)
Relief Valve Pressure	3335 psi

Loader

Breakout Force	5484 psi
Bucket Capacity	0.50 cu yd (0.38 cu m)
Operating Load Rating	1,950.00 lbs (884.51 kg)
Tipping Angle	4000 degrees

Operating Specifications

Alternator Supplied Amperage	90 amps
Breakout Force - Tilt Cylinder	5,484.00 lbs (2,487.50 kg)
Chain Box Fluid Capacity - each side	1.80 gal (6.81 l)
Cooling System Fluid Capacity	2.60 gal (9.84 l)
Engine Oil Fluid Capacity	2.60 gal (9.84 l)
Fuel Capacity	23.80 gal (90.08 l)
Hydraulic System Fluid Capacity	13.70 gal (51.85 l)
Max Speed	7.50 mph (12.07 kph)
Operating Voltage	12 volts
Operating Weight	7,007.00 lbs (3,178.33 kg)
Rated Operating Capacity	1,950.00 lbs (884.51 kg)
Rated Operating Capacity with Optional Counterweight	2,050.00 lbs (929.87 kg)
Tipping Load	3,900.00 lbs (1,769.01 kg)

Power Train

Travel Speed Forward	7.60 mph (12.23 kph)
Travel Speed Forward - 2-Speed Option	11.60 mph (18.67 kph)
Travel Speed Reverse	7.60 mph (12.23 kph)
Travel Speed Reverse - 2-Speed Option	11.60 mph (18.67 kph)

Service Refill Capacities

Chain Box - Each Side	1.80 gal (6.81 l)
Cooling System	2.60 gal (9.84 l)
Engine Crankcase	2.40 gal (9.08 l)
Fuel Tank	23.80 gal (90.08 l)
Hydraulic System	13.70 gal (51.85 l)
Hydraulic Tank	9.20 gal (34.82 l)

Weights

Operating Weight

7,007.00 lbs (3,178.33 kg)

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon