The Caterpillar 236B III Skid Steer Loader boasts impressive dimensions and power to tackle a variety of tasks with ease. With a operating weight of 7,007 lbs and a rated operating capacity of 1,950 lbs, this machine is designed for efficient performance. The Cat C3.4 DIT engine delivers a gross power of 74 hp, while the hydraulic system provides ample power with a flow rate of 22 gpm and a pressure of 3335 psi. Whether lifting, dumping, or maneuvering in tight spaces, the 236B III offers reliability and strength for any job at hand.
Cab
Caterpillar 236B III Skid Steer Loader Cab specifications
FOPS
SAE J1043 SEPT87 ISO 3449:1992 Level I
FOPS Level II
SAE J231 JAN81 ISO 3449:1992 Level II
ROPS
SAE J1040 MAY94 ISO 3471:1994
Dimensions
Caterpillar 236B III Skid Steer Loader Dimensions specifications
Bucket Pin Height - Carry Position
8.40 in (21.34 cm)
Bucket Pin Height - Maximum Lift
10.20 ft (3.11 m)
Bumper Overhang - Rear Axle
41.00 in (104.14 cm)
Clearance at Max Lift and Dump
7.90 ft (2.41 m)
Clearance at Maximum Lift and Dump
94.00 in (238.76 cm)
Departure Angle
28 degrees
Ground Clearance
9.30 in (23.62 cm)
Height - Top of Cab
6.90 ft (2.10 m)
Length - With Bucket on Ground
138.00 in (350.52 cm)
Length - Without Bucket
110.00 in (279.40 cm)
Length w/o Bucket
9.20 ft (2.80 m)
Length with Bucket
11.60 ft (3.54 m)
Maximum Dump Angle
40 degrees
Maximum Overall Height
156.00 in (396.24 cm)
Maximum Reach - With Arms Parallel
53.00 in (134.62 cm)
Rack Back Angle - Maximum Height
83 degrees
Reach - Maximum Lift/Dump
21.00 in (53.34 cm)
Reach at Max Lift and Dump
21.30 in (54.10 cm)
Turn Radius from Center - Bucket
82.00 in (208.28 cm)
Turn Radius from Center - Coupler
52.00 in (132.08 cm)
Turn Radius from Center - Rear
64.00 in (162.56 cm)
Turning Radius from Center - inc bucket
82.40 in (209.30 cm)
Turning Radius from Center - machine rear
63.90 in (162.31 cm)
Vehicle Width over Tires
66.00 in (167.64 cm)
Wheel Base
3.80 ft (1.16 m)
Wheelbase
3.80 ft (1.16 m)
Width Over Tires
5.50 ft (1.68 m)
Engine
Caterpillar 236B III Skid Steer Loader Engine specifications
Bore
3.70 in (9.40 cm)
Displacement
201.00 cu in (3,293.81 cu cm)
Engine Make
Caterpillar
Engine Model
Cat C3.4 DIT
Gross Power - SAE J1995
74.00 hp (55.18 kw)
Net Flywheel Power
71.00 hp (52.95 kw)
Net Power - ISO 9249 EEC
71.00 hp (52.95 kw)
Net Power - SAE 1349
71.00 hp (52.95 kw)
Stroke
4.70 in (11.94 cm)
Hydraulic System
Caterpillar 236B III Skid Steer Loader Hydraulic System specifications
Hydraulic Flow
Standard
Hydraulic Power
42.80 hp (31.92 kw)
Loader Hydraulic Flow
22.00 gpm (83.27 lpm)
Loader Hydraulic Pressure
3335 psi
Pump Flow Capacity
22.00 gpm (83.27 lpm)
Relief Valve Pressure
3335 psi
Loader
Caterpillar 236B III Skid Steer Loader Loader specifications
Breakout Force
5484 psi
Operating Load Rating
1,950.00 lbs (884.51 kg)
Operating Width
66.00 in (167.64 cm)
Tipping Angle
3900 degrees
Operating Specifications
Caterpillar 236B III Skid Steer Loader Operating Specifications specifications
Alternator Supplied Amperage
90 amps
Breakout Force - Tilt Cylinder
5,484.00 lbs (2,487.50 kg)
Chain Box Fluid Capacity - each side
1.90 gal (7.19 l)
Cooling System Fluid Capacity
2.70 gal (10.22 l)
Engine Oil Fluid Capacity
2.40 gal (9.08 l)
Fuel Capacity
23.80 gal (90.08 l)
Hydraulic System Fluid Capacity
13.80 gal (52.23 l)
Max Speed
11.30 mph (18.19 kph)
Operating Speed
7.60 mph (12.23 kph)
Operating Voltage
12 volts
Operating Weight
7,007.00 lbs (3,178.33 kg)
Rated Operating Capacity
1,950.00 lbs (884.51 kg)
Rated Operating Capacity with Optional Counterweight
2,050.00 lbs (929.87 kg)
Tipping Load
3,900.00 lbs (1,769.01 kg)
Power Train
Caterpillar 236B III Skid Steer Loader Power Train specifications
Travel Speed Forward
7.50 mph (12.07 kph)
Travel Speed Forward - 2-Speed Option
11.20 mph (18.02 kph)
Travel Speed Reverse
7.50 mph (12.07 kph)
Travel Speed Reverse - 2-Speed Option
11.20 mph (18.02 kph)
Service Refill Capacities
Caterpillar 236B III Skid Steer Loader Service Refill Capacities specifications
Chain Box - Each Side
1.80 gal (6.81 l)
Cooling System
2.60 gal (9.84 l)
Engine Crankcase
2.40 gal (9.08 l)
Fuel Tank
23.80 gal (90.08 l)
Hydraulic System
13.70 gal (51.85 l)
Hydraulic Tank
9.20 gal (34.82 l)
Weights
Caterpillar 236B III Skid Steer Loader Weights specifications
Operating Weight
7,007.00 lbs (3,178.33 kg)
×
Stay Ahead of the Market
Get weekly equipment news, auction updates, and dealer insights — trusted by thousands of industry professionals.
