Category : Skid Steer Loaders ➔ Manufacturer : Caterpillar ➔ Model : 242 ➔
The Caterpillar 242 Skid Steer Loader offers a robust and versatile solution for various construction and agricultural needs. With a powerful Caterpillar Cat 3034C engine producing 54 horsepower, this machine can handle tough tasks with ease. Featuring a spacious cab with optional FOPS and ROPS levels, the 242 provides safety and comfort for operators. With a maximum lift height of 10 feet and an operating weight of 6931 lbs, the Caterpillar 242 is a reliable and efficient choice for your work site.
Cab
Caterpillar 242 Skid Steer Loader Cab specifications
FOPS
SAEJ/ISO 3449 APR98 Level I and ISO3449:1992 Level I
FOPS Level II
SAEJ/ISO 3449 APR 98 Level II and ISO 3449:1992 Level II (optional)
ROPS
SAE J1040 MAY94 and ISO3471:1994
Dimensions
Caterpillar 242 Skid Steer Loader Dimensions specifications
Bucket Pin Height - Carry Position
11.80 in (29.97 cm)
Bucket Pin Height - Maximum Lift
10.00 ft (3.05 m)
Bumper Overhang - Rear Axle
38.90 in (98.81 cm)
Clearance at Max Lift and Dump
7.50 ft (2.29 m)
Clearance at Maximum Lift and Dump
88.20 in (224.03 cm)
Ground Clearance
7.00 in (17.78 cm)
Length - With Bucket on Ground
135.30 in (343.66 cm)
Length - Without Bucket
109.30 in (277.62 cm)
Length w/o Bucket
9.20 ft (2.80 m)
Length with Bucket
11.30 ft (3.44 m)
Maximum Overall Height
154.60 in (392.68 cm)
Reach - Maximum Lift/Dump
29.90 in (75.95 cm)
Reach at Max Lift and Dump
30.20 in (76.71 cm)
Turning Radius from Center - inc bucket
88.80 in (225.55 cm)
Vehicle Width over Tires
66.00 in (167.64 cm)
Wheel Base
3.60 ft (1.10 m)
Wheelbase
3.80 ft (1.16 m)
Width Over Tires
5.10 ft (1.55 m)
Engine
Caterpillar 242 Skid Steer Loader Engine specifications
Bore
3.90 in (9.91 cm)
Displacement
183.00 cu in (2,998.84 cu cm)
Engine Make
Caterpillar
Engine Model
Cat 3034C
Gross Power
54.00 hp (40.27 kw)
Net Flywheel Power
54.00 hp (40.27 kw)
Number of Cylinders
4
Power Measured @
2600 rpm
Stroke
4.00 in (10.16 cm)
Hydraulic System
Caterpillar 242 Skid Steer Loader Hydraulic System specifications
Loader Hydraulic Flow
15.10 gpm (57.15 lpm)
Loader Hydraulic Pressure
3300 psi
Pump Flow Capacity
15.20 gpm (57.53 lpm)
Loader
Caterpillar 242 Skid Steer Loader Loader specifications
Bucket Capacity
0.60 cu yd (0.46 cu m)
Operating Load Rating
2,000.00 lbs (907.03 kg)
Tipping Angle
3770 degrees
Operating Specifications
Caterpillar 242 Skid Steer Loader Operating Specifications specifications
Breakout Force - Lift Cylinder
3,814.00 lbs (1,729.71 kg)
Breakout Force - Tilt Cylinder
4,056.00 lbs (1,839.46 kg)
Fuel Capacity
17.20 gal (65.10 l)
Hydraulic System Fluid Capacity
14.60 gal (55.26 l)
Max Speed
6.90 mph (11.10 kph)
Operating Speed
6.90 mph (11.10 kph)
Operating Weight
6,931.00 lbs (3,143.31 kg)
Rated Operating Capacity
2,000.00 lbs (907.03 kg)
Rated Operating Capacity with Optional Counterweight
2,047.00 lbs (928.34 kg)
Tipping Load
4,000.00 lbs (1,814.06 kg)
Service Refill Capacities
Caterpillar 242 Skid Steer Loader Service Refill Capacities specifications
Chain Box - Each Side
1.60 gal (6.06 l)
Cooling System
24.00 gal (90.84 l)
Engine Crankcase
2.10 gal (7.95 l)
Fuel Tank
18.20 gal (68.89 l)
Hydraulic System
15.30 gal (57.91 l)
Hydraulic Tank
9.20 gal (34.82 l)
Weights
Caterpillar 242 Skid Steer Loader Weights specifications
Operating Weight
6,858.50 lbs (3,110.43 kg)
