Caterpillar 260 Skid Steer Loader Specs

Category: Skid Steer Loaders ➔
Manufacturer: Caterpillar ➔
Model: 260 ➔

The Caterpillar 260 is a skid steer loader designed for construction, landscaping, agriculture, and material handling applications. It is part of Caterpillar's compact equipment lineup and is built for maneuverability in confined work areas. The machine typically features a vertical lift design, hydraulic attachment capability, and a compact frame for loading, grading, digging, and site cleanup tasks. The Caterpillar 260 is commonly used with buckets, forks, augers, and other compatible attachments. Its skid steer configuration allows tight turning and efficient operation on job sites where space is limited.

General Specifications

Caterpillar 260 Skid Steer Loader General Specifications specifications
Engine Power	74.00 hp (55.18 kw) - Starting 2025
Operating Width	67 / 72 - Starting 2026
Rated Operating Capacity LBS (KG) 50%	3,160 (1434) - Starting 2025

Cab

Caterpillar 260 Skid Steer Loader Cab specifications
FOPS	ISO 3449:2005 Level I - Starting 2026
FOPS Level II	ISO 3449:2005 (Optional) - Starting 2026
ROPS	ISO 3471:2008 - Starting 2026

Dimensions

Caterpillar 260 Skid Steer Loader Dimensions specifications
Bucket Pin Height - Carry Position	8.00 in (20.32 cm) - Starting 2026
Bucket Pin Height - Maximum Lift	132.50 in (336.55 cm) - Starting 2026
Bucket Pin Reach - Maximum Lift	12.60 in (32.00 cm) - Starting 2026
Clearance at Maximum Lift and Dump	96.20 in (244.35 cm) - Starting 2026
Departure Angle	23 degrees - Starting 2026
Ground Clearance	7.90 in (20.07 cm) - Starting 2026
Height	6.83 ft (2.08 m)
Height - Top of Cab	81.90 in (208.03 cm) - Starting 2026
Length	11.25 ft (3.43 m)
Length - With Bucket on Ground	135.00 in (342.90 cm) - Starting 2026
Length - Without Bucket	116.40 in (295.66 cm) - Starting 2026
Maximum Dump Angle	46 degrees - Starting 2026
Maximum Overall Height	155.80 in (395.73 cm) - Starting 2026
Maximum Reach - With Arms Parallel to Ground	44.10 in (112.01 cm) - Starting 2026
Rack Back Angle - Maximum Height	97 degrees - Starting 2026
Reach - Maximum Lift/Dump	21.70 in (55.12 cm) - Starting 2026
Roll Back Angle	28 degrees - Starting 2026
Turning Radius from Center - Bucket	82.70 in (210.06 cm) - Starting 2026
Turning Radius from Center - Coupler	53.80 in (136.65 cm) - Starting 2026
Turning Radius from Center - Machine Rear	71.80 in (182.37 cm) - Starting 2026
Vehicle Width over Tires	66.50 in (168.91 cm) - Starting 2026
Weight	8,523.00 lbs (3,865.97 kg)
Wheel Base	49.20 in (124.97 cm) - Starting 2026
Width	5.58 ft (1.70 m)

Engine

Caterpillar 260 Skid Steer Loader Engine specifications
Bore	3.50 in (8.89 cm) - Starting 2026
Displacement	171.00 cu in (2,802.19 cu cm) - Starting 2026
Engine Model	Cat C2.8T (turbo) - Starting 2026
Gross Power - SAE J1995:2014	74.00 hp (55.18 kw) - Starting 2026
Net Power - ISO 9249	73.00 hp (54.44 kw) - Starting 2026
Net Power - SAE 1349	74.00 hp (55.18 kw) - Starting 2026
Peak Torque - 1,600 rpm - SAE J1995	221.00 lbs ft (299.63 nm) - Starting 2026
Stroke	4.30 in (10.92 cm) - Starting 2026

Hydraulic System

Caterpillar 260 Skid Steer Loader Hydraulic System specifications
Hydraulic Flow - High Flow - Hydraulic Power (Calculated)	58.00 hp (43.25 kw) - Starting 2026
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow	30.00 gpm (113.55 lpm) - Starting 2026
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure	3500 psi - Starting 2026
Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated)	80.70 hp (60.18 kw) - Starting 2026
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow	34.00 gpm (128.69 lpm) - Starting 2026
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure	4061 psi - Starting 2026
Hydraulic Flow - Standard - Hydraulic Power (Calculated)	39.00 hp (29.08 kw) - Starting 2026
Hydraulic Flow - Standard - Loader Hydraulic Flow	20.00 gpm (75.70 lpm) - Starting 2026
Hydraulic Flow - Standard - Loader Hydraulic Pressure	3335 psi - Starting 2026

Noise Level

Caterpillar 260 Skid Steer Loader Noise Level specifications
Inside Cab*	83 dB(A) - Starting 2026
Outside Cab**	101 dB(A) - Starting 2026

Operating Specifications

Caterpillar 260 Skid Steer Loader Operating Specifications specifications
Breakout Force - Lift Cylinder	5,948.00 lbs (2,697.97 kg) - Starting 2026
Breakout Force - Tilt Cylinder	9,372.00 lbs (4,251.07 kg) - Starting 2026
Rated Operating Capacity	3,160.00 lbs (1,433.35 kg) - Starting 2026
Rated Operating Capacity with Optional Counterweight	3,394.00 lbs (1,539.49 kg) - Starting 2026
Tipping Load	6,321.00 lbs (2,867.16 kg) - Starting 2026

Power Train

Caterpillar 260 Skid Steer Loader Power Train specifications
Travel Speed - Forward or Reverse - One Speed	7.70 mph (12.39 kph) - Starting 2026
Travel Speed - Forward or Reverse - Two Speed Option	11.10 mph (17.86 kph) - Starting 2026

Service Refill Capacities

Caterpillar 260 Skid Steer Loader Service Refill Capacities specifications
Chain Box - Each Side	2.40 gal (9.08 l) - Starting 2026
Cooling System	3.00 gal (11.36 l) - Starting 2026
Engine Crankcase	2.10 gal (7.95 l) - Starting 2026
Fuel Tank	31.00 gal (117.34 l) - Starting 2026
Hydraulic System	9.70 gal (36.71 l) - Starting 2026
Hydraulic Tank	6.90 gal (26.12 l) - Starting 2026

Sustainability

Caterpillar 260 Skid Steer Loader Sustainability specifications
Recyclability	93% - Starting 2026

Weights

Caterpillar 260 Skid Steer Loader Weights specifications
Operating Weight	8,523.00 lbs (3,865.97 kg) - Starting 2026

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon