Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
FOPS | SAEJ/ISO 3449 APR98 Level I and ISO3449:1992 Level I |
FOPS Level II | SAEJ/ISO 3449 APR 98 Level II and ISO 3449:1992 Level II (optional) |
ROPS | SAE J1040 MAY94 and ISO3471:1994 |
Bucket Pin Height - Carry Position | 9.6 in |
Bucket Pin Height - Maximum Lift | 10.7 ft |
Bumper Overhang - Rear Axle | 41 in |
Clearance at Max Lift and Dump | 8 ft |
Clearance at Maximum Lift and Dump | 98.2 in |
Ground Clearance | 9 in |
Height - Top of Cab | 6.9 ft |
Length - With Bucket on Ground | 142.4 in |
Length - Without Bucket | 114.3 in |
Length w/o Bucket | 9.6 ft |
Length with Bucket | 11.9 ft |
Maximum Overall Height | 161 in |
Reach - Maximum Lift/Dump | 32.5 in |
Reach at Max Lift and Dump | 30.8 in |
Turning Radius from Center - inc bucket | 89.2 in |
Vehicle Width over Tires | 72 in |
Wheel Base | 4.1 ft |
Wheelbase | 4.1 ft |
Width Over Tires | 6.1 ft |
Bore | 3.9 in |
Displacement | 183 cu in |
Engine Make | Caterpillar |
Engine Model | Cat 3034C |
Net Flywheel Power | 74 hp (55 kw) |
Number of Cylinders | 4 |
Power Measured @ | 2600 rpm |
Stroke | 4 in |
Hydraulic Flow | Standard flow |
Loader Hydraulic Flow | 22 gpm |
Loader Hydraulic Pressure | 3300 psi |
Pump Flow Capacity | 22 gpm |
Bucket Capacity | 0.6 cu yd |
Operating Load Rating | 2500 lbs |
Tipping Angle | 4779.6 deg |
Breakout Force - Lift Cylinder | 5020 lbs |
Breakout Force - Tilt Cylinder | 5212 lbs |
Fuel Capacity | 23.8 gal |
Hydraulic System Fluid Capacity | 14.1 gal |
Max Speed | 7.6 mph (11 kph) |
Operating Speed | 7.6 mph (11 kph) |
Operational Weight | 3552 lbs |
Rated Operating Capacity | 2500 lbs |
Rated Operating Capacity with Optional Counterweight | 2550 lbs |
Tipping Load | 5000 lbs |
Chain Box - Each Side | 2.1 gal |
Cooling System | 2.6 gal |
Engine Crankcase | 1.8 gal |
Fuel Tank | 23.8 gal |
Hydraulic System | 14 gal |
Hydraulic Tank | 9.2 gal |
Operating Weight | 7655 lbs |