Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Air Conditioning | The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.430 metric tonnes. |
FOPS | ISO 3449:2005 Level I |
FOPS Level II | ISO 3449:2005 Level II |
ROPS | ISO 3471:2008 |
Bucket Pin Height - Carry Position | 7.9 in (20 cm) |
Bucket Pin Height - Maximum Lift | 10.5 ft (3 m) |
Bucket Pin Reach - Maximum Lift | 15.5 in (39 cm) |
Bumper Overhang - Rear Axle | 42.6 in (108 cm) |
Clearance at Max Lift and Dump | 7.9 ft (2 m) |
Clearance at Maximum Lift and Dump | 93.7 in (238 cm) |
Departure Angle | 26 degrees |
Ground Clearance | 8.9 in (23 cm) |
Height - Top of Cab | 7 ft (2 m) |
Hinge pin height - fully raised | 124.9 in (317 cm) |
Length - With Bucket on Ground | 146.2 in (371 cm) |
Length - Without Bucket | 117.9 in (299 cm) |
Length w/o Bucket | 9.9 ft (3 m) |
Length with Bucket | 12.2 ft (4 m) |
Maximum Dump Angle | 51 degrees |
Maximum Overall Height | 157.8 in (401 cm) |
Maximum Reach - With Arms Parallel | 50.9 in (129 cm) |
Rack Back Angle - Maximum Height | 84 degrees |
Reach - Maximum Lift/Dump | 30.9 in (78 cm) |
Reach at Max Lift and Dump | 31 in (79 cm) |
Turn Radius from Center - Bucket | 85.9 in (218 cm) |
Turn Radius from Center - Coupler | 55.2 in (140 cm) |
Turn Radius from Center - Rear | 71.1 in (181 cm) |
Turning Radius from Center - inc bucket | 85.9 in (218 cm) |
Turning Radius from Center - machine rear | 71.1 in (181 cm) |
Vehicle Width over Tires | 66 in (168 cm) |
Wheel Base | 4.1 ft (1 m) |
Wheelbase | 4.1 ft (1 m) |
Bore | 3.7 in (9 cm) |
Displacement | 203 cu in (0 cu m) |
Engine Model | Cat C3.3B DIT (Turbo) |
Gross Power - SAE J1995 | 74.3 hp (55 kw) |
Max Torque | 195.5 lbs ft |
Net Flywheel Power | 72.9 hp (54 kw) |
Net Power - ISO 9249 EEC | 73.7 hp (55 kw) |
Net Power - SAE 1349 | 72.9 hp (54 kw) |
Stroke | 4.7 in (12 cm) |
Torque Measured @ | 1500 rpm |
Hydraulic Flow (1) | Standard |
Hydraulic Flow (2) | High Flow XPS |
Pump Flow Capacity | 32 gpm (121 lpm) |
Operating Load Rating | 2700 lbs (1,225 kg) |
Operating Width | 66 in (168 cm) |
Alternator Supplied Amperage | 80 amps |
Breakout Force - Tilt Cylinder | 7355 lbs (3,336 kg) |
Chain Box Fluid Capacity - each side | 3.4 gal (13 l) |
Cooling System Fluid Capacity | 3.7 gal (14 l) |
Fuel Capacity | 24.9 gal (94 l) |
Hydraulic System Fluid Capacity | 13.8 gal (52 l) |
Max Speed | 7.7 mph (12 kph) |
Operating Voltage | 12 volts |
Operational Weight | 8011.6 lbs (3,634 kg) |
Rated Operating Capacity | 2700 lbs (1,225 kg) |
Rated Operating Capacity with Optional Counterweight | 2950 lbs (1,338 kg) |
Tipping Load | 5400 lbs (2,449 kg) |
Tire Size | 12 × 16.5 |
Travel Speed Forward | 7.7 mph (12 kph) |
Travel Speed Forward - 2-Speed Option | 11 mph (18 kph) |
Travel Speed Reverse | 7.7 mph (12 kph) |
Travel Speed Reverse - 2-Speed Option | 11 mph (18 kph) |
Chain Box - Each Side | 3.3 gal (12 l) |
Cooling System | 3.7 gal (14 l) |
Engine Crankcase | 3 gal (11 l) |
Fuel Tank | 24.8 gal (94 l) |
Hydraulic System | 13.7 gal (52 l) |
Hydraulic Tank | 10.3 gal (39 l) |
Operating Weight | 8011 lbs (3,634 kg) |