Category : Skid Steer Loaders ➔ Manufacturer : Caterpillar ➔ Model : 272D XHP ➔
The Caterpillar 272D XHP is a high-performance skid steer loader designed for demanding material handling, construction, landscaping, and site preparation tasks. It features a vertical lift design, high-flow auxiliary hydraulics, and a powerful Cat diesel engine for improved attachment performance and productivity. The 272D XHP is commonly used with buckets, pallet forks, augers, trenchers, and other hydraulic attachments. Its compact frame supports maneuverability in confined work areas, while the enclosed cab option improves operator comfort and visibility. The Caterpillar 272D XHP is part of Caterpillar's D Series skid steer lineup and is built for versatile jobsite operation.
Cab
Caterpillar 272D XHP Skid Steer Loader Cab specifications
Fops
ISO 3449:2005 Level I
Fops Level Ii
ISO 3449:2005 Level I
Rops
ISO 3471:2008
Dimensions
Caterpillar 272D XHP Skid Steer Loader Dimensions specifications
Bucket Pin Height - Carry Position
7.70 in (19.56 cm)
Bucket Pin Height - Maximum Lift
10.68 ft (3.26 m)
Bucket Pin Reach - Maximum Lift
14.90 in (37.85 cm)
Bumper Overhang - Rear Axle
42.80 in (108.71 cm)
Clearance At Maximum Lift And Dump
97.20 in (246.89 cm)
Departure Angle
28 degrees
Ground Clearance
0.85 ft (0.26 m)
Height
7.00 ft (2.13 m)
Height - Top Of Cab
7.03 ft (2.14 m)
Length
12.67 ft (3.86 m)
Length - With Bucket On Ground
151.81 in (385.60 cm)
Length - Without Bucket
123.50 in (313.69 cm)
Maximum Dump Angle
52 degrees
Maximum Overall Height
161.40 in (409.96 cm)
Maximum Reach - With Arms Parallel
49.60 in (125.98 cm)
Rack Back Angle - Maximum Height
83 degrees
Reach - Maximum Lift/Dump
30.00 in (76.20 cm)
Turn Radius From Center - Bucket
90.80 in (230.63 cm)
Turn Radius From Center - Coupler
57.60 in (146.30 cm)
Turn Radius From Center - Rear
73.70 in (187.20 cm)
Vehicle Width Over Tires
76.00 in (193.04 cm)
Weight
9,137.00 lbs (4,144.48 kg)
Wheel Base
4.55 ft (1.39 m)
Width
6.33 ft (1.93 m)
Engine
Caterpillar 272D XHP Skid Steer Loader Engine specifications
Bore
3.90 in (9.91 cm)
Displacement
232.00 cu in (3,801.81 cu cm)
Engine Model
Cat C3.8 (turbocharged)
Gross Power
110.00 hp (82.03 kw)
Gross Power - Sae J1995
110.00 hp (82.03 kw)
Net Flywheel Power
106.00 hp (79.05 kw)
Net Power - Iso 9249 Eec
107.00 hp (79.79 kw)
Net Power - Sae 1349
106.00 hp (79.05 kw)
Stroke
4.70 in (11.94 cm)
Hydraulic System
Caterpillar 272D XHP Skid Steer Loader Hydraulic System specifications
Hydraulic Flow (1)
Standard Flow Mode
Hydraulic Flow (2)
High Flow XHP
Hydraulic Power - Calculated (1)
44.00 hp (32.81 kw)
Hydraulic Power - Calculated (2)
94.00 hp (70.10 kw)
Loader Hydraulic Flow (1)
23.00 gpm (87.06 lpm)
Loader Hydraulic Flow (2)
40.00 gpm (151.40 lpm)
Loader Hydraulic Pressure (1)
3335 psi
Loader Hydraulic Pressure (2)
4061 psi
Operating Specifications
Caterpillar 272D XHP Skid Steer Loader Operating Specifications specifications
Breakout Force - Lift Cylinder
6,087.00 lbs (2,761.02 kg)
Breakout Force - Tilt Cylinder
7,348.00 lbs (3,333.00 kg)
Rated Operating Capacity
3,700.00 lbs (1,678.29 kg)
Tipping Load
7,400.00 lbs (3,356.59 kg)
Power Train
Caterpillar 272D XHP Skid Steer Loader Power Train specifications
Travel Speed Forward
7.20 mph (11.59 kph)
Travel Speed Forward - 2-Speed Option
10.30 mph (16.58 kph)
Travel Speed Reverse
7.20 mph (11.59 kph)
Travel Speed Reverse - 2-Speed Option
10.30 mph (16.58 kph)
Service Refill Capacities
Caterpillar 272D XHP Skid Steer Loader Service Refill Capacities specifications
Chain Box - Each Side
2.70 gal (10.22 l)
Cooling System
4.10 gal (15.52 l)
Engine Crankcase
3.50 gal (13.25 l)
Fuel Tank
32.20 gal (121.88 l)
Hydraulic System
14.50 gal (54.88 l)
Hydraulic Tank
10.30 gal (38.99 l)
Weights
Caterpillar 272D XHP Skid Steer Loader Weights specifications
Operating Weight
9,137.00 lbs (4,144.48 kg)
