- Category: Skid Steer Loaders ➔
- Manufacturer: Caterpillar ➔
- Model: 272D ➔
The Caterpillar 272D is a skid steer loader designed for material handling, grading, loading, and attachment work in construction, landscaping, agriculture, and utility applications. It is part of Caterpillar's D Series and is known for its vertical lift design, which supports improved reach and lift height for truck loading and pallet handling. The 272D typically features a compact frame, hydraulic attachment capability, and operator controls suited for confined job sites. Common uses include site preparation, debris removal, snow clearing, and general earthmoving. The model is often selected for versatility, maneuverability, and compatibility with a wide range of skid steer attachments.
Cab
| FOPS | SAE J1043 SEPT87 ISO 3449:1992 Level I
|
| FOPS Level II | SAE J231 JAN81 ISO 3449:1992 Level II
|
| ROPS | SAE J1040 MAY94 ISO 3471:1994
|
Dimensions
| Bucket Pin Height - Carry Position | 7.90 in (20.07 cm)
|
| Bucket Pin Height - Maximum Lift | 10.60 ft (3.23 m)
|
| Bucket Pin Reach - Maximum Lift | 16.10 in (40.89 cm)
|
| Bumper Overhang - Rear Axle | 42.70 in (108.46 cm)
|
| Clearance at Max Lift and Dump | 8.00 ft (2.44 m)
|
| Clearance at Maximum Lift and Dump | 95.20 in (241.81 cm)
|
| Departure Angle | 25 degrees
|
| Ground Clearance | 8.90 in (22.61 cm)
|
| Height - Top of Cab | 7.00 ft (2.13 m)
|
| Hinge pin height - fully raised | 126.70 in (321.82 cm)
|
| Length - With Bucket on Ground | 151.60 in (385.06 cm)
|
| Length - Without Bucket | 123.60 in (313.94 cm)
|
| Length w/o Bucket | 10.30 ft (3.14 m)
|
| Length with Bucket | 12.70 ft (3.87 m)
|
| Maximum Dump Angle | 52 degrees
|
| Maximum Overall Height | 159.40 in (404.88 cm)
|
| Maximum Reach - With Arms Parallel | 50.70 in (128.78 cm)
|
| Rack Back Angle - Maximum Height | 83 degrees
|
| Reach - Maximum Lift/Dump | 30.90 in (78.49 cm)
|
| Reach at Max Lift and Dump | 31.00 in (78.74 cm)
|
| Turn Radius from Center - Bucket | 91.50 in (232.41 cm)
|
| Turn Radius from Center - Coupler | 58.90 in (149.61 cm)
|
| Turn Radius from Center - Rear | 73.80 in (187.45 cm)
|
| Turning Radius from Center - machine rear | 73.80 in (187.45 cm)
|
| Vehicle Width over Tires | 76.00 in (193.04 cm)
|
| Wheel Base | 4.60 ft (1.40 m)
|
| Wheelbase | 4.60 ft (1.40 m)
|
| Width Over Tires | 6.40 ft (1.95 m)
|
Engine
| Bore | 3.90 in (9.91 cm)
|
| Displacement | 232.00 cu in (3,801.81 cu cm)
|
| Engine Model | Cat C3.8 (turbocharged)
|
| Gross Power - SAE J1995 | 98.00 hp (73.08 kw)
|
| Net Flywheel Power | 95.00 hp (70.84 kw)
|
| Net Power - ISO 9249 EEC | 95.00 hp (70.84 kw)
|
| Net Power - SAE 1349 | 95.00 hp (70.84 kw)
|
| Stroke | 4.70 in (11.94 cm)
|
Hydraulic System
| Hydraulic Flow (1) | Standard
|
| Hydraulic Flow (2) | High Flow XPS
|
| Loader Hydraulic Flow | 23.00 gpm (87.06 lpm)
|
| Loader Hydraulic Pressure | 3335 psi
|
| Maximum Loader Hydraulic Flow | 32.00 gpm (121.12 lpm)
|
| Maximum Loader Hydraulic Pressure | 4061 psi
|
Loader
| Operating Load Rating | 3,200.00 lbs (1,451.50 kg)
|
| Operating Width | 72.00 in (182.88 cm)
|
| Tipping load (ISO 14397) | 6,400.10 lbs (2,903.04 kg)
|
Operating Specifications
| Alternator Supplied Amperage | 100 amps
|
| Breakout Force - Lift Cylinder | 6,100.00 lbs (2,766.92 kg)
|
| Breakout Force - Tilt Cylinder | 7,405.00 lbs (3,358.86 kg)
|
| Chain Box Fluid Capacity - each side | 2.30 gal (8.71 l)
|
| Cooling System Fluid Capacity | 3.70 gal (14.00 l)
|
| Engine Oil Fluid Capacity | 2.70 gal (10.22 l)
|
| Fuel Capacity | 31.00 gal (117.34 l)
|
| Hydraulic System Fluid Capacity | 16.20 gal (61.32 l)
|
| Max Speed | 6.60 mph (10.62 kph)
|
| Operating Voltage | 12 volts
|
| Operating Weight | 18,527.70 lbs (8,404.03 kg)
|
| Rated Operating Capacity | 3,200.00 lbs (1,451.50 kg)
|
| Rated Operating Capacity with Optional Counterweight | 3,450.00 lbs (1,564.90 kg)
|
| Tipping Load | 6,400.00 lbs (2,902.99 kg)
|
| Tire Size | 14 x 17.5
|
Power Train
| Travel Speed Forward | 6.60 mph (10.62 kph)
|
| Travel Speed Forward - 2-Speed Option | 9.40 mph (15.13 kph)
|
| Travel Speed Reverse | 6.60 mph (10.62 kph)
|
| Travel Speed Reverse - 2-Speed Option | 9.40 mph (15.13 kph)
|
Service Refill Capacities
| Chain Box - Each Side | 2.30 gal (8.71 l)
|
| Cooling System | 3.70 gal (14.00 l)
|
| Engine Crankcase | 2.60 gal (9.84 l)
|
| Fuel Tank | 30.80 gal (116.58 l)
|
| Hydraulic System | 16.00 gal (60.56 l)
|
| Hydraulic Tank | 10.30 gal (38.99 l)
|
Weights
| Operating Weight | 8,404.00 lbs (3,812.00 kg)
|
