JCB 250 Skid Steer Loader Specs

Category: Skid Steer Loaders ➔
Manufacturer: JCB ➔
Model: 250 ➔

General Specifications

JCB 250 Skid Steer Loader General Specifications specifications
ENGINE POWER	74.00 hp (55.18 kw) — Starting 2017 Model Year
OPERATING LOAD	2,250.00 lbs (1,020.58 kg) — Starting 2017 Model Year
OPERATING WIDTH	72.00 in (182.88 cm) — Starting 2017 Model Year

Capacities

JCB 250 Skid Steer Loader Capacities specifications
Engine Coolant	5.90 gal (22.33 l)
Engine Oil	4.00 gal (15.14 l)
Fuel Tank	27.30 gal (103.33 l)
Hydraulic System	14.60 gal (55.26 l)

Dimensions

JCB 250 Skid Steer Loader Dimensions specifications
Angle Of Departure	29 degrees
Bucket Corner Turning Radius	7.55 ft (2.30 m)
Dig Depth	393.71 in (1,000.02 cm)
Dump Angle	42 degrees
Dump Height	7.55 ft (2.30 m)
Ground Clearance	9.85 in (25.02 cm)
Loadover Height	9,514.44 ft (2,900.00 m)
Max. Reach @ Full Height	3.29 ft (1.00 m)
Overall Height	6.89 ft (2.10 m)
Overall Length	152.76 in (388.01 cm)
Pin Height	10.50 ft (3.20 m)
Quick Hitch Turning Radius	4.93 ft (1.50 m)
Reach @ Ground Level	3.61 ft (1.10 m)
Rear Chassis Turning Radius	5.78 ft (1.76 m)
Rollback - Ground Level	30 degrees
Wheelbase	4.11 ft (1.25 m)
Width Over Tyres	70.87 in (180.01 cm)

Engine

JCB 250 Skid Steer Loader Engine specifications
Alternator	95 amps
Aspiration	Turbo
Battery	12 V
Cooling System	Diesel
Displacement	4,399.00 cu in (72,086.85 cu cm)
Emissions Certification	EPA-T4F (EU St3B)
Engine Model	EcoMAX TCAE-55
Engine Oil Service Interval	500 hours
Fuel	Diesel
Gross Power	73.80 hp (55.03 kw)
Hydraulically Driven Cooling Fan	Yes
Max Torque	295.10 lbs ft (400.10 nm)
Power Measured @	2400 rpm
Starter Motor	4.2 KW
Torque Measured @	1200 rpm

Hydraulic

JCB 250 Skid Steer Loader Hydraulic specifications
Pump Flow Capacity	23.80 gpm (90.08 lpm)
Relief Valve Pressure	483.8 psi

Loader

JCB 250 Skid Steer Loader Loader specifications
Breakout Force	6,543.40 lbs (2,968.04 kg)
Bucket Capacity	0.6 cu yd
Bucket Width	78.40 in (199.14 cm)
Loader Lift Capacity With Bucket	5,884.20 lbs (2,669.03 kg)
Tipping Angle	5055.2 degrees

Operational

JCB 250 Skid Steer Loader Operational specifications
Operating Weight	8,214.50 lbs (3,726.04 kg)

Transmission

JCB 250 Skid Steer Loader Transmission specifications
Travel Speed	12.00 mph (19.31 kph)

Tyres

JCB 250 Skid Steer Loader Tyres specifications
Standard	12 x 16.5 - 10 PR Xtra Wall Off Road

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon