Category : Skid Steer Loaders ➔ Manufacturer : JCB ➔ Model : 300 ➔
The JCB 300 is a skid steer loader designed for material handling, grading, loading, and site support tasks in construction, landscaping, agriculture, and utility work. It is part of JCB's compact equipment range and is typically used where maneuverability, lift performance, and attachment versatility are required. The JCB 300 skid steer loader features a compact frame, operator cab, hydraulic attachment capability, and four-wheel drive configuration for work on confined job sites. Common applications include pallet handling, trench backfilling, debris removal, and general earthmoving. Specifications may vary by market and configuration, including engine output, operating capacity, and hydraulic flow.
General Specifications
JCB 300 Skid Steer Loader General Specifications specifications
ENGINE POWER
74.00 hp (55.18 kw) - Starting 2019
OPERATING LOAD
3,000.00 lbs (1,360.78 kg) - Starting 2016
OPERATING WIDTH
75.00 in (190.50 cm) - Starting 2019
Rated Operating Capacity
3,186.00 lbs (1,445.15 kg) - Starting 2025
RATED OPERATING CAPACITY (50%)
3,186.00 lbs (1,445.15 kg) - Starting 2019
Rated Operating Capacity LBS (KG) 50%
3,186 (1,445) - Starting 2024
Dimensions
JCB 300 Skid Steer Loader Dimensions specifications
Angle Of Departure
29 degrees
Clearance At Max Lift And Dump
8.08 ft (2.46 m)
Dig Depth
393.71 in (1,000.02 cm)
Dump Angle
42 degrees
Dump Height
7.55 ft (2.30 m)
Ground Clearance
9.85 in (25.02 cm)
Height
6.83 ft (2.08 m)
Height To Top Of Cab
6.86 ft (2.09 m)
Length
12.42 ft (3.78 m)
Length With Bucket
12.41 ft (3.78 m)
Loadover Height
9,514.44 ft (2,900.00 m)
Pin Height
10,498.69 ft (3,200.00 m)
Reach At Max Lift And Dump
35.44 in (90.02 cm)
Rollback - Ground Level
30 degrees
Turning Radius From Center - Inc Bucket
86.62 in (220.01 cm)
Turning Radius From Center - Machine Rear
69.30 in (176.02 cm)
Weight
9,054.00 lbs (4,106.83 kg)
Wheelbase
4.11 ft (1.25 m)
Width
6.00 ft (1.83 m)
Width Over Tires
5.91 ft (1.80 m)
Engine
JCB 300 Skid Steer Loader Engine specifications
Aspiration
Turbo
Battery
12 V
Cooling System
Liquid
Displacement
268.00 cu in (4,391.74 cu cm)
Emissions Certification
EPA-T4F (EU St3B)
Engine Make
2257
Engine Model
EcoMAX TCAE-55
Engine Oil Service Interval
500 hours
Fuel
Diesel
Gross Power
74.00 hp (55.18 kw)
Max Torque
295.10 lbs ft (400.10 nm)
Power Measured @
2400 rpm
Starter Motor
4.2 KW
Torque Measured @
1200 rpm
Hydraulic
JCB 300 Skid Steer Loader Hydraulic specifications
Pump Flow Capacity
23.80 gpm (90.08 lpm)
Relief Valve Pressure
3335 psi
Loader
JCB 300 Skid Steer Loader Loader specifications
Breakout Force
6,543.40 lbs (2,968.04 kg)
Bucket Capacity
0.6 cu yd
Bucket Width
74.90 in (190.25 cm)
Loader Lift Capacity With Bucket
6,056.10 lbs (2,747.00 kg)
Operating Load Rating
3,000.00 lbs (1,360.78 kg)
Tipping Angle
6369.2 degrees
Operational
JCB 300 Skid Steer Loader Operational specifications
Alternator Supplied Amperage
95 amps
Chain Box Fluid Capacity - Each Side
6.10 gal (23.09 l)
Cooling System Fluid Capacity
4.10 gal (15.52 l)
Engine Oil Fluid Capacity
4.00 gal (15.14 l)
Fuel Capacity
27.30 gal (103.33 l)
Hydraulic System Fluid Capacity
14.60 gal (55.26 l)
Max Speed
12.40 mph (19.96 kph)
Operating Speed
6.80 mph (10.94 kph)
Operating Voltage
12 V
Operating Weight
9,288.10 lbs (4,213.02 kg)
Tire Size
12 x 16.5
Transmission
JCB 300 Skid Steer Loader Transmission specifications
Travel Speed
12.50 mph (20.12 kph)
Tyres
JCB 300 Skid Steer Loader Tyres specifications
Standard
12 x 16.5 - 10 PR Xtra Wall Off Road
