All Equipment Category Specs ↠ Skid Steer Loaders ↠ John Deere 250

John Deere 250 Skid Steer Loader

Category: Skid Steer Loaders (See all Skid Steer Loaders for sale)
Manufacturer: John Deere (See all John Deere Equipment for sale)
Model: 250 (See all John Deere 250 for sale)

Dimensions

Clearance at Max Lift and Dump	7.6 ft (2 m)
Ground Clearance	9.6 in (24 cm)
Height - Top of Cab	6.4 ft (2 m)
Length w/o Bucket	8.6 ft (3 m)
Length with Bucket	10.5 ft (3 m)
Reach at Max Lift and Dump	28.1 in (71 cm)
Turning Radius from Center - inc bucket	78.9 in (200 cm)
Turning Radius from Center - machine rear	61.4 in (156 cm)
Wheelbase	3.6 ft (1 m)
Width Over Tires	5.9 ft (2 m)

Engine

Displacement	179 cu in (0 cu m)
Engine Model	3029T
Number of Cylinders	3
Power Measured @	2400 rpm

Hydraulic System

Pump Flow Capacity	17.6 gpm (67 lpm)
Pump Type	Hydrostatic
Relief Valve Pressure	3100 psi

Loader

Breakout Force	5500 psi
Operating Load Rating	1750 lbs (794 kg)
Tipping Angle	3600 degrees

Operating Specifications

Alternator Supplied Amperage	55 amps
Cooling System Fluid Capacity	2.8 gal (11 l)
Fuel Capacity	15 gal (57 l)
Hydraulic System Fluid Capacity	6 gal (23 l)
Max Speed	8.5 mph (14 kph)
Operating Voltage	12 volts
Operational Weight	6250 lbs (2,835 kg)

See all of the John Deere 250s we have listed for sale.

A 2002 John Deere 250 From Sievers JCB for $14,900.00 USD

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon