Categories ↠ Skid Steer Loaders ↠ John Deere 8875

John Deere 8875 Skid Steer Loader

Category: Skid Steer Loaders ➔
Manufacturer: John Deere ➔
Model: 8875 ➔

Dimensions

Clearance at Max Lift and Dump	8.10 ft (2.47 m)
Ground Clearance	8.00 in (20.32 cm)
Height - Top of Cab	6.10 ft (1.86 m)
Length w/o Bucket	9.40 ft (2.87 m)
Length with Bucket	11.90 ft (3.63 m)
Reach at Max Lift and Dump	30.00 in (76.20 cm)
Turning Radius from Center - inc bucket	82.80 in (210.31 cm)
Turning Radius from Center - machine rear	69.30 in (176.02 cm)
Wheelbase	4.00 ft (1.22 m)
Width Over Tires	5.80 ft (1.77 m)

Engine

Aspiration	Turbocharged
Displacement	177.00 cu in (2,900.52 cu cm)
Engine Model	3029T
Number of Cylinders	3
Power Measured @	2100 rpm

Hydraulic System

Pump Flow Capacity	17.60 gpm (66.62 lpm)
Pump Type	3 spool open-center
Relief Valve Pressure	2600 psi

Loader

Breakout Force	5203 psi
Operating Load Rating	2,352.00 lbs (1,066.85 kg)
Tipping Angle	6284 degrees

Operating Specifications

Alternator Supplied Amperage	55 amps
Cooling System Fluid Capacity	4.00 gal (15.14 l)
Engine Oil Fluid Capacity	2.30 gal (8.71 l)
Fuel Capacity	18.80 gal (71.16 l)
Hydraulic System Fluid Capacity	6.80 gal (25.74 l)
Max Speed	12.10 mph (19.47 kph)
Operating Speed	12.10 mph (19.47 kph)
Operating Voltage	12 volts
Operating Weight	7,004.00 lbs (3,176.96 kg)

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon