Categories ↠ Skid Steer Loaders ↠ New Holland L175

New Holland L175 Skid Steer Loader

Category: Skid Steer Loaders ➔
Manufacturer: New Holland ➔
Model: L175 ➔

Dimensions

Clearance at Max Lift and Dump	12.30 ft (3.75 m)
Ground Clearance	8.30 in (21.08 cm)
Height - Top of Cab	6.40 ft (1.95 m)
Length with Bucket	10.80 ft (3.29 m)
Reach at Max Lift and Dump	29.20 in (74.17 cm)
Turning Radius from Center - inc bucket	70.10 in (178.05 cm)
Wheelbase	3.60 ft (1.10 m)
Width Over Tires	6.00 ft (1.83 m)

Engine

Displacement	134.30 cu in (2,200.79 cu cm)
Engine Model	N844LT
Number of Cylinders	4
Power Measured @	2900 rpm

Hydraulic System

Pump Flow Capacity	17.20 gpm (65.10 lpm)
Pump Type	Gear type
Relief Valve Pressure	2600 psi

Loader

Breakout Force	4312 psi
Bucket Capacity	0.70 cu yd (0.54 cu m)
Operating Load Rating	2,000.00 lbs (907.19 kg)
Tipping Angle	4000 degrees

Operating Specifications

Alternator Supplied Amperage	55 amps
Chain Box Fluid Capacity - each side	1.60 gal (6.06 l)
Cooling System Fluid Capacity	4.50 gal (17.03 l)
Engine Oil Fluid Capacity	2.20 gal (8.33 l)
Fuel Capacity	14.40 gal (54.50 l)
Hydraulic System Fluid Capacity	8.60 gal (32.55 l)
Max Speed	10.10 mph (16.25 kph)
Operating Speed	6.00 mph (9.66 kph)
Operating Voltage	12 volts
Operating Weight	6,230.30 lbs (2,826.02 kg)
Tire Size	12.00X16.5

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon