Thomas 250 Skid Steer Loader Specs

Category: Skid Steer Loaders ➔
Manufacturer: Thomas ➔
Model: 250 ➔

Dimensions

Thomas 250 Skid Steer Loader Dimensions specifications
Clearance at Max Lift and Dump	8.10 ft (2.47 m)
Ground Clearance	9.00 in (22.86 cm)
Height - Top of Cab	7.00 ft (2.13 m)
Length w/o Bucket	9.80 ft (2.99 m)
Length with Bucket	12.20 ft (3.72 m)
Reach at Max Lift and Dump	21.50 in (54.61 cm)
Turning Radius from Center - inc bucket	84.00 in (213.36 cm)
Turning Radius from Center - machine rear	69.80 in (177.29 cm)
Wheelbase	4.10 ft (1.25 m)
Width Over Tires	5.90 ft (1.80 m)

Engine

Thomas 250 Skid Steer Loader Engine specifications
Aspiration	Turbocharged
Displacement	202.50 cu in (3,318.39 cu cm)
Engine Model	V3300T Turbo
Gross Power	87.40 hp (65.18 kw)
Number of Cylinders	4
Power Measured @	2750 rpm

Hydraulic System

Thomas 250 Skid Steer Loader Hydraulic System specifications
Pump Flow Capacity	21.00 gpm (79.49 lpm)
Pump Type	Hydrostatic
Relief Valve Pressure	3000 psi

Loader

Thomas 250 Skid Steer Loader Loader specifications
Breakout Force	4450 psi
Operating Load Rating	2,500.00 lbs (1,133.98 kg)
Tipping Angle	5000 degrees

Operating Specifications

Thomas 250 Skid Steer Loader Operating Specifications specifications
Alternator Supplied Amperage	60 amps
Fuel Capacity	28.70 gal (108.63 l)
Hydraulic System Fluid Capacity	24.00 gal (90.84 l)
Max Speed	12.10 mph (19.47 kph)
Operating Voltage	12 volts
Operating Weight	8,000.00 lbs (3,628.74 kg)

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon