- Category: Skid Steer Loaders ➔
- Manufacturer: Thomas ➔
- Model: 255 ➔
Thomas 255 is a skid steer loader from Thomas Equipment, designed for compact construction, landscaping, agricultural, and material handling applications. The machine uses a rigid frame with lift arms and a front-mounted attachment system for buckets, forks, augers, and other hydraulic tools. The Thomas 255 is typically associated with maneuverability in confined work areas, with a compact footprint and zero-radius turning capability common to skid steer loaders. Depending on configuration, it may be equipped with diesel power, hydraulic auxiliary circuits, and a cab or open operator station. The model is used for loading, grading, digging, and general jobsite support tasks.
Dimensions
| Clearance at Max Lift and Dump | 8.10 ft (2.47 m)
|
| Ground Clearance | 9.00 in (22.86 cm)
|
| Height - Top of Cab | 7.00 ft (2.13 m)
|
| Length w/o Bucket | 9.80 ft (2.99 m)
|
| Length with Bucket | 12.20 ft (3.72 m)
|
| Reach at Max Lift and Dump | 21.50 in (54.61 cm)
|
| Turning Radius from Center - inc bucket | 84.00 in (213.36 cm)
|
| Turning Radius from Center - machine rear | 69.80 in (177.29 cm)
|
| Wheelbase | 4.10 ft (1.25 m)
|
| Width Over Tires | 5.90 ft (1.80 m)
|
Engine
| Aspiration | Turbocharged
|
| Displacement | 202.50 cu in (3,318.39 cu cm)
|
| Engine Model | V3300T Turbo
|
| Gross Power | 87.40 hp (65.18 kw)
|
| Number of Cylinders | 4
|
| Power Measured @ | 2750 rpm
|
Hydraulic System
| Pump Flow Capacity | 21.00 gpm (79.49 lpm)
|
| Pump Type | Hydrostatic
|
| Relief Valve Pressure | 3000 psi
|
Loader
| Breakout Force | 7000 psi
|
| Bucket Capacity | 0.60 cu yd (0.46 cu m)
|
| Operating Load Rating | 2,500.00 lbs (1,133.98 kg)
|
| Tipping Angle | 5000 degrees
|
Operating Specifications
| Alternator Supplied Amperage | 60 amps
|
| Fuel Capacity | 28.70 gal (108.63 l)
|
| Hydraulic System Fluid Capacity | 24.00 gal (90.84 l)
|
| Operating Voltage | 12 volts
|
| Operating Weight | 8,000.00 lbs (3,628.74 kg)
|