Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
Introducing the powerful Caterpillar 545, a robust Skidders / Yarder designed to tackle the toughest terrain with ease. With its impressive specifications and capabilities, this machine is a force to be reckoned with in the logging and forestry industries. From its dual-function arch and grapple features to its hydraulic system and powertrain specifications, the Caterpillar 545 is built to maximize efficiency and productivity on the job. Get ready to elevate your operations with the innovative technology and superior performance of the Caterpillar 545 Skidders / Yarder.
| Arch Types | 51.3 |
| Dual Function - Lift Highest, Farthest | 109.30 in (277.62 cm) |
| Dual Function - Lift Highest, Retracted | 14.60 in (37.08 cm) |
| Dual Function - Lift Lowest, Farthest | 51.10 in (129.79 cm) |
| Dual Function - Lift Lowest, Retracted | 104.50 in (265.43 cm) |
| Dual Function - Lift Maximum Reach | 73.90 in (187.71 cm) |
| Dual Function - Reach Highest, Farthest | 62.30 in (158.24 cm) |
| Dual Function - Reach Highest, Retracted | 107.00 in (271.78 cm) |
| Dual Function - Reach Lowest, Farthest | 70.60 in (179.32 cm) |
| Dual Function - Reach Lowest, Retracted | 124.90 in (317.25 cm) |
| Dual Function - Reach Maximum | 75.90 in (192.79 cm) |
| Blade Width | 82.30 ft (25.09 m) |
| Cable Width | 147.70 in (375.16 cm) |
| Drum Capacity at Cable Width | 45,186.60 ft (13,772.88 m) |
| Drum Diameter | 11.00 in (27.94 cm) |
| Grapple Capacity - tongs tip to tip | 10.00 cu ft (3.05 cu m) |
| Height - Top of Cab | 2.00 ft (0.61 m) |
| Length | 12.60 ft (3.84 m) |
| Max Blade Height | 16.20 in (41.15 cm) |
| Max Line Pull - bare drum | 360.90 lbs (163.70 kg) |
| Max Line Speed | 4.80 ft/min (1.46 m/min) |
| Overall Length | 11.20 ft (3.41 m) |
| Overall Width | 11.10 ft (3.38 m) |
| Wheel Base | 99.80 ft (30.42 m) |
| Air Cleaner | 24V |
| Aspiration | 40161.7 |
| Battery - Volts | 950 CCA |
| Battery Capacity | Blower |
| Battery Quantity | 12V |
| Bore | 6.00 in (15.24 cm) |
| Derating Altitude | 2,200.00 ft (670.56 m) |
| Electrical System | 2 |
| Engine Model | 225 |
| Fan Speed | Enclosed wet disc rpm |
| Fan Type | Direct electric |
| Governed Speed at Rated Power | Dry precleaner rpm |
| Gross Power | 200.00 hp (149.14 kw) |
| Gross Power - SAE J1995 | 200.00 hp (149.14 kw) |
| Maximum Torque at Rated Speed | 1981 |
| Net Flywheel Power | 10,663.00 hp (7,951.53 kw) |
| Net Power - EEC 80/1269 | 200.00 hp (149.14 kw) |
| Net Power - ISO 9249 | 198.00 hp (147.65 kw) |
| Net Power - SAE J1349 | 225.00 hp (167.79 kw) |
| Power Measured @ | 638 rpm |
| Stroke | 200.00 in (508.00 cm) |
| Torque Measured @ | 99.9 rpm |
| Bunching - Full Open Height | 47.90 in (121.67 cm) |
| Bunching - Fully Closed Height | 5.40 in (13.72 cm) |
| Bunching - Minimum Stem Diameter | 85.50 in (217.17 cm) |
| Bunching - Tip to Tip Height | 128.00 in (325.12 cm) |
| Sorting - Tong Opening | 16.60 in (42.16 cm) |
| Sorting Capacity | 45,200.00 cu ft (13,777.13 cu m) |
| Circuit Type | direct link non-follow |
| Dozer Cylinder - Bore | 34.30 in (87.12 cm) |
| Dozer Cylinder - Rod Diameter | 3 or 4 stack pilot in (7.62 cm) |
| Dozer Cylinder - Stroke | 2.30 in (5.84 cm) |
| Dozer Valve | 4 |
| Grapple Valve | 50 |
| Pump Output | 17.00 gpm (64.35 lpm) |
| Pump Type | 3045 |
| Relief Valve Pressure | 12.6 psi |
| Relief Valve Setting | closed cntr var flow psi |
| Reservoir Tank Capacity | 11.10 gal (42.01 l) |
| Steering Cylinder - Bore | 16.90 in (42.93 cm) |
| Steering Cylinder - Rod Diameter | direct linkage in |
| Steering Cylinder - Stroke | 2.00 in (5.08 cm) |
| Steering Valve | 3.5 |
| Alternator Supplied Amperage | Counter-Shaft Powershift |
| Cooling System Fluid Capacity | 7.70 gal (29.14 l) |
| Engine Oil Capacity | 13.80 gal (52.23 l) |
| Front Diff Fluid Capacity | 19.60 gal (74.19 l) |
| Fuel Capacity | 14.80 gal (56.02 l) |
| Operating Voltage | 75 amps |
| Operating Weight | 24 V lbs (10.89 kg) |
| Rear Diff Fluid Capacity | 14.30 gal (54.13 l) |
| Steering Angle | 30.5 x 32 16 PR |
| Tire Size | 10.3 |
| Transmission Fluid Capacity | 32.50 gal (123.01 l) |
| Brakes - Parking Type | Full Hydraulic Control |
| Brakes - Service Type | Drum |
| Maximum Drawbar Pull | 4.00 lbs (1.81 kg) |
| Steering, Frame Articulation | 43762.5 |
| Torque Converter - Model | Lower tank radiator |
| Torque Converter Type | 44600 |
| Transmission | 17.1 |
| Transmission Cooler Location | Rotating housing single stage |
| Transmission Cooler Type | 5fwd/3rev countershaft powershift |
| Travel Speed - Forward 1 | 5.60 mph (9.01 kph) |
| Travel Speed - Forward 2 | 6.80 mph (10.94 kph) |
| Travel Speed - Forward 3 | 9.50 mph (15.29 kph) |
| Travel Speed - Forward 4 | 3.90 mph (6.28 kph) |
| Travel Speed - Forward 5 | C484-E3611 AAA |
| Travel Speed - Reverse 1 | 6.50 mph (10.46 kph) |
| Travel Speed - Reverse 2 | 11.60 mph (18.67 kph) |
| Travel Speed - Reverse 3 | Plate mph |
| Cooling System | 32.00 gal (121.12 l) |
| Differential - Final Drives - Front | 19.60 gal (74.19 l) |
| Differential - Final Drives - Rear | 14.00 gal (52.99 l) |
| Engine Oil | 17.00 gal (64.35 l) |
| Fuel Tank | 13.70 gal (51.85 l) |
| Hydraulic System - Tank | dual/cable gal |
| Hydraulic System - Total | 7.00 gal (26.50 l) |
| Mechanical Winch | 14.80 gal (56.02 l) |
| Transmission - Torque Converter | 6.60 gal (24.98 l) |
| Max Speed - Forward | 11.60 mph (18.67 kph) |
| Number of Forward Gears | 3 |
| Number of Reverse Gears | 17.1 |
| Transmission Type | 5 |
| Ground Contact Area | Axial Piston cu in |
| Length of Track on Ground | Cat 3306 DITA ft |
| Arch - Cable Skidding | 2,630.00 lbs (1,192.95 kg) |
| Decking Blade | 2,651.00 lbs (1,202.47 kg) |
| Enclosed ROPS + AC | 2,360.00 lbs (1,070.48 kg) |
| Open ROPS | axial piston lbs |
| Tires - 24.5 x 32, 16 PR | 5,190.00 lbs (2,354.15 kg) |
| Winch | 2,100.00 lbs (952.55 kg) |
| Drum Capacity - 19.0 mm (3/4 in) | 10.00 ft (3.05 m) |
| Drum Capacity - 22.2 mm (7/8 in) | 82.00 ft (24.99 m) |
| Drum Diameter | 11.00 in (27.94 cm) |
| Drum Width | 106.00 in (269.24 cm) |
| Maximum Line Pull - Bare Drum | 360.00 lbs (163.29 kg) |
| Maximum Line Speed | 148.00 ft/min (45.11 m/min) |