All Equipment Category Specs ↠ Forklifts ↠ Hyster H155FT LP

Hyster H155FT LP Forklift

Category: Forklifts (See all Forklifts for sale)
Manufacturer: Hyster (See all Hyster Equipment for sale)
Model: H155FT LP (See all Hyster H155FT LP for sale)

Dimensions

Gradeability	27%
Ground Clearance	10 in (25 cm)
Height to Top of Overhead Guard	8 ft (3 m)
Length to Fork Face	12 ft (4 m)
Max Fork Height	18 ft (5 m)
Overall Height - mast lowered	12 ft (4 m)
Overall Width	7 ft (2 m)
Right Angle Stack	13 ft (4 m)
Track width front	6 ft (2 m)
Track width rear	5 ft (2 m)
Turning Radius	11 ft (3 m)
Wheelbase	7 ft (2 m)

Engine

Displacement	263 cu in (4,310 cu cm)
Engine Model	GM 4.3L
Fuel Type	LP
Number of Cylinders	6
Power	96 hp (72 kw)
Power Measured @	2400 rpm
Torque	210 lbs ft (285 nm)
Torque Measured @	2400 rpm

MAST

Lift Speed	106 ft/min (32 m/min)
Load Capacity	15,432 lbs (7,000 kg)
Load Center	24 in (61 cm)
Lower Speed	81 ft/min (25 m/min)
Mast Tip Forward	5 degrees
Mast Tip Rear	10 degrees
Max Fork Spread	74 in (188 cm)

Operating Specifications

Axle load - front	9,160 lbs (4,155 kg)
Axle load - rear	11,632 lbs (5,276 kg)
Hydraulic System Relief Valve Pressure	2250 psi
Hydraulic Tank	19 gal (72 l)
Max Speed	16 mph (25 kph)
Number of Front Wheels	4
Number of Rear Wheels	2
Operating Weight	20,792 lbs (9,431 kg)
Tire Type	Pneumatic

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon