All Equipment Category Specs ↠ Forklifts ↠ Hyster S70FT

Hyster S70FT Forklift

Category: Forklifts (See all Forklifts for sale)
Manufacturer: Hyster (See all Hyster Equipment for sale)
Model: S70FT (See all Hyster S70FT for sale)

Dimensions

Gradeability	25%
Ground Clearance	5 in (13 cm)
Height to Top of Overhead Guard	7 ft (2 m)
Length to Fork Face	8 ft (2 m)
Overall Height - mast lowered	7.2 ft (2 m)
Overall Width	3.8 ft (1 m)
Right Angle Stack	8.3 ft (3 m)
Turning Radius	6.8 ft (2 m)
Wheelbase	4.7 ft (1 m)

Engine

Displacement	143 cu in (0 cu m)
Engine Make	Kubota 2.5L
Engine Model	PSI 2.4L
Number of Cylinders	4
Power	59 hp (44 kw)
Power Measured @	2700 rpm
Torque	121 lbs ft
Torque Measured @	2000 rpm

MAST

Lift Speed	108 ft/min (33 m/min)
Load Capacity	6999.7 lbs (3,175 kg)
Load Center	24.1 in (61 cm)
Lower Speed	114 ft/min (35 m/min)
Mast Tip Forward	5 degrees
Mast Tip Rear	5 degrees

Operating Specifications

Axle load - front	3269.5 lbs (1,483 kg)
Axle load - rear	7266.5 lbs (3,296 kg)
Drawbar Pull	5172.1 lbs (2,346 kg)
Front Tire Size	21 X 9 x 15
Fuel Capacity	10.7 gal (40 l)
Hydraulic System Relief Valve Pressure	2250 psi
Hydraulic Tank	9.5 gal (36 l)
Max Speed	11.2 mph (18 kph)
Number of Front Wheels	2
Number of Rear Wheels	2
Operating Weight	10535.9 lbs (4,779 kg)
Rear Tire Size	16 x 7 x 10.5
Tire Type	Cushion

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon