Category : Telehandlers ➔ Manufacturer : Caterpillar ➔ Model : TL642C ➔
The Caterpillar TL642C is a telescopic handler in Caterpillar's telehandler lineup, designed for material handling, lifting, and placement tasks on construction and industrial job sites. It features a telescopic boom for extended reach and load positioning, making it suitable for moving palletized materials, lifting supplies, and supporting site logistics. The TL642C is commonly used in applications requiring maneuverability, lift height, and forward reach in confined or uneven terrain. As a Caterpillar telehandler, it is associated with rugged construction, operator visibility, and compatibility with a range of attachments used in general construction and material handling operations.
Axles
Caterpillar TL642C Telehandler Axles specifications
Manufacturer
Dana
Boom Performance
Caterpillar TL642C Telehandler Boom Performance specifications
Boom Down
10 s
Boom Up
13 s
Drawbar Pull - Basic
18,000.00 lbs (8,164.67 kg)
Tele In
13 s
Tele Out
14 s
Brakes
Caterpillar TL642C Telehandler Brakes specifications
Features
Service Brakes - inboard wet disc brakes on front and rear axles; Parking Brakes- spring-applied hydraulic release on front axle
Parking Brake
Spring-applied hydraulic release on front axle
Dimensions
Caterpillar TL642C Telehandler Dimensions specifications
Ground Clearance
1.37 ft (0.42 m)
Height
7.80 ft (2.38 m)
Length
18.42 ft (5.61 m)
Length - Fork Face
18.50 ft (5.64 m)
Turning Radius - Over Tires
12.00 ft (3.66 m)
Weight
21,245.00 lbs (9,636.58 kg)
Wheel Base
10.70 ft (3.26 m)
Width
94.92 in (241.10 cm)
Engine
Caterpillar TL642C Telehandler Engine specifications
Bore
4.20 in (10.67 cm)
Displacement
268.50 cu in (4,399.94 cu cm)
Engine Model
Cat C3.4B Tier 4 Interim
Gross Power - Basic
99.00 hp (73.83 kw)
Maximum Torque - Standard
302.40 lbs ft (409.99 nm)
Stroke
5.00 in (12.70 cm)
Hydraulic System
Caterpillar TL642C Telehandler Hydraulic System specifications
Pump Type
Single-section
Instrumentation
Caterpillar TL642C Telehandler Instrumentation specifications
Features
Volt meter, hourmeter, engine oil pressure gauge, fuel gauge, water temperature gauge
Operating Specifications
Caterpillar TL642C Telehandler Operating Specifications specifications
Load At Maximum Height
6,500.00 lbs (2,948.35 kg)
Load At Maximum Height - No Stabilizers
6,500.00 lbs (2,948.35 kg)
Load At Maximum Reach
700.00 lbs (317.52 kg)
Load At Maximum Reach - No Stabilizers
700.00 lbs (317.52 kg)
Maximum Forward Reach
30.00 ft (9.14 m)
Maximum Lift Height
42.00 ft (12.80 m)
Rated Load Capacity
6,500.00 lbs (2,948.35 kg)
Top Travel Speed
20.40 mph (32.83 kph)
Operational
Caterpillar TL642C Telehandler Operational specifications
Operating Weight
21,245.00 lbs (9,636.58 kg)
Operator Station
Caterpillar TL642C Telehandler Operator Station specifications
Features
Vinyl suspension seat, single electronic joystick, spacious interior, ergonomic cab
Service Refill Capacities
Caterpillar TL642C Telehandler Service Refill Capacities specifications
Fuel Tank
38.00 gal (143.83 l)
Hydraulic System
40.00 gal (151.40 l)
Hydraulic Tank
40.00 gal (151.40 l)
Tires
Caterpillar TL642C Telehandler Tires specifications
Optional Construction
13.00 x 24 Foam Filled or Rock Lug or Solid
Standard
13.00 x 24 12-PR
