Caterpillar TL642D with Stabilizers Telehandler Specs

Category: Telehandlers ➔
Manufacturer: Caterpillar ➔
Model: TL642D with Stabilizers ➔

Axles

Caterpillar TL642D with Stabilizers Telehandler Axles specifications
Type (1)	Trunnion mounted planetary 55 degree steer axles
Type (2)	High bias limited slip differential on front axle

Boom Performance

Caterpillar TL642D with Stabilizers Telehandler Boom Performance specifications
Boom Down	10.7 s
Boom Up	15.5 s
Tele In	11.8 s
Tele Out	17 s

Brakes

Caterpillar TL642D with Stabilizers Telehandler Brakes specifications
Parking Brakes	Wet disc, spring applied hydraulic release on front axle
Service Brakes	Inboard wet disc brakes on front and rear axles

Engine

Caterpillar TL642D with Stabilizers Telehandler Engine specifications
Engine Model	Cat C3.4B
Gross Power - Basic	100.00 hp (74.57 kw)
Note	Meets U.S. EPA Tier 4 Final emission standards.

Hydraulic System

Caterpillar TL642D with Stabilizers Telehandler Hydraulic System specifications
Auxiliary Hydraulic Flow	18.00 gpm (68.13 lpm)
Auxiliary Hydraulic Pressure	3481 psi
Gear Pump	Single-section
Note	Auxiliary Hydraulic Circuit used for all attachments equipped with cylinders or other hydraulic components.
System Operating Pressure	3770 psi

Operating Specifications

Caterpillar TL642D with Stabilizers Telehandler Operating Specifications specifications
Capacity At Maximum Height (O/R Down)	6,500.00 lbs (2,948.35 kg)
Capacity At Maximum Height (O/R Up)	6,000.00 lbs (2,721.56 kg)
Capacity At Maximum Reach (O/R Down)	1,700.00 lbs (771.11 kg)
Capacity At Maximum Reach (O/R Up)	600.00 lbs (272.16 kg)
Drawbar Pull - Loaded	19,783.00 lbs ft (26,821.79 nm)
Frame Leveling	10 degrees
Maximum Forward Reach	30.00 ft (9.14 m)
Maximum Lift Height	42.00 ft (12.80 m)
Rated Load Capacity	6,500.00 lbs (2,948.35 kg)
Top Travel Speed	20.00 mph (32.19 kph)
Turning Radius - Over Tires	12.00 ft (3.66 m)

Operational

Caterpillar TL642D with Stabilizers Telehandler Operational specifications
Operating Weight	22,928.00 lbs (10,399.98 kg)

Service Refill Capacities

Caterpillar TL642D with Stabilizers Telehandler Service Refill Capacities specifications
Diesel Exhaust Fluid (Def) Tank	5.70 gal (21.57 l)
Fuel Tank	38.30 gal (144.97 l)
Hydraulic System	42.00 gal (158.97 l)

Tires

Caterpillar TL642D with Stabilizers Telehandler Tires specifications
Optional (1)	370/75-28 Foam Duraforce
Optional (2)	13.00 24-16 PR Air
Optional (3)	13.00 24-12 PR Foam Filled
Optional (4)	13.00 24 Solid
Standard	370/75-28 Air Duraforce

Transmission Speeds

Caterpillar TL642D with Stabilizers Telehandler Transmission Speeds specifications
Forward	4 speed
Reverse	3 speed

Work Tools

Caterpillar TL642D with Stabilizers Telehandler Work Tools specifications
Carriages - Dual Fork Positioning	50.00 in (127.00 cm)
Carriages - Side Shift	48.00 in (121.92 cm)
Carriages - Standard Rotate	50.00 in (127.00 cm)
Carriages - Standard Tilt	50.00 in (127.00 cm)
Carriages - Swing	100 degrees, 1829 mm, 2948 kg Capacity, 2268 kg Swung (100 degrees, 72 in, 6,500 lb Capacity, 5,000 lb Swung)
Carriages - Wide Rotate	72.00 in (182.88 cm)
Carriages - Wide Tilt	72.00 in (182.88 cm)
Cubing Forks	[2] 1220 mm, 50 mm 50 mm ([2] 48 in, 2 in 2 in)
Hydraulic It Coupler	Includes Auxiliary Electrics
Lumber Forks - Option 1	[2] 1525 mm, 45 mm 180 mm ([2] 60 in, 1.75 in 7 in)
Lumber Forks - Option 2	[2] 1829 mm, 50 mm 150 mm ([2] 72 in, 2 in 6 in)
Pallet Forks - Option 1	[2] 1220 mm, 60 mm 125 mm ([2] 48 in, 2.36 in 5 in)
Pallet Forks - Option 2	[2] 1220 mm, 60 mm 100 mm ([2] 48 in, 2.36 in 4 in)
Pallet Forks - Option 3	[2] 1525 mm, 60 mm 150 mm ([2] 60 in, 2.36 in 6 in)

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon