Category : Telehandlers ➔ Manufacturer : Caterpillar ➔ Model : TL943C ➔
The Caterpillar TL943C is a telehandler designed for material handling, lifting, and placement tasks on construction and industrial sites. It features a telescopic boom for extended reach and height, making it suitable for loading, unloading, and moving palletized materials in confined or elevated work areas. The TL943C is part of Caterpillar's telehandler lineup and is commonly used in building construction, agriculture, and general site logistics. Key specifications typically include lift capacity, maximum lift height, forward reach, drivetrain configuration, and attachment compatibility. The model is identified by the Caterpillar TL943C designation within the telehandler equipment category.
Axles
Caterpillar TL943C Telehandler Axles specifications
Manufacturer
Dana
Boom Performance
Caterpillar TL943C Telehandler Boom Performance specifications
Boom Down
10.2 seconds
Boom Up
13.9 seconds
Drawbar Pull - Basic
22,619.00 lbs (10,259.82 kg)
Tele In
16.8 seconds
Tele Out
14.9 seconds
Brakes
Caterpillar TL943C Telehandler Brakes specifications
Features
Service Brakes - inboard wet disc brakes on front and rear axles; Parking Brakes- spring-applied hydraulic release on front axle
Parking Brake
Spring-applied hydraulic release on front axle
Dimensions
Caterpillar TL943C Telehandler Dimensions specifications
Ground Clearance
19.20 in (48.77 cm)
Height
8.00 ft (2.44 m)
Length - Fork Face
20.50 ft (6.25 m)
Length to Fork Face
20.60 ft (6.28 m)
Overall Height
8.00 ft (2.44 m)
Turning Radius - Over Tires
12.00 ft (3.66 m)
Turning Radius Outside Tires
12.20 ft (3.72 m)
Wheel Base
11.00 ft (3.35 m)
Wheelbase
11.00 ft (3.35 m)
Width Over Tires
8.00 ft (2.44 m)
Engine
Caterpillar TL943C Telehandler Engine specifications
Bore
3.90 in (9.91 cm)
Displacement
207.50 cu in (3,400.32 cu cm)
Engine Make
CATERPILLAR
Engine Model
Cat C3.4B Tier 4 Interim
Gross Power
111.40 hp (83.07 kw)
Gross Power - Basic
111.30 hp (83.00 kw)
Max Torque
332.00 lbs ft (450.13 nm)
Maximum Torque - Standard
302.40 lbs ft (409.99 nm)
Stroke
4.30 in (10.92 cm)
Torque Measured @
1400 rpm
Hydraulic System
Caterpillar TL943C Telehandler Hydraulic System specifications
Pump Flow Capacity
10.10 gpm (38.23 lpm)
Pump Type
Tandem gear pump
Relief Valve Pressure
4000 psi
Instrumentation
Caterpillar TL943C Telehandler Instrumentation specifications
Features
Volt meter hourmeter engine oil pressure gauge fuel gauge water temperature gauge
Lift System
Caterpillar TL943C Telehandler Lift System specifications
Max Forward Reach
31.50 ft (9.60 m)
Max Lift Capacity
8,999.30 lbs (4,082.02 kg)
Max Lift Height
43.00 ft (13.11 m)
Max Load at Max Height
6,999.70 lbs (3,175.01 kg)
Max Load at Max Reach
1,199.40 lbs (544.04 kg)
Operating Specifications
Caterpillar TL943C Telehandler Operating Specifications specifications
Drawbar Pull
26,000.00 lbs (11,793.42 kg)
Fuel Capacity
38.10 gal (144.21 l)
Hydraulic System Fluid Capacity
41.50 gal (157.08 l)
Load at Maximum Height
7,000.00 lbs (3,175.15 kg)
Load at Maximum Height - No Stabilizers
7,000.00 lbs (3,175.15 kg)
Load at Maximum Reach
1,200.00 lbs (544.31 kg)
Load at Maximum Reach - No Stabilizers
1,200.00 lbs (544.31 kg)
Maximum Forward Reach
31.50 ft (9.60 m)
Maximum Lift Height
43.00 ft (13.11 m)
Operating Weight
26,526.10 lbs (12,032.05 kg)
Rated Load Capacity
9,000.00 lbs (4,082.34 kg)
Tire Size
370/75-28 Duraforce MT
Top Travel Speed
20.30 mph (32.67 kph)
Operator Station
Caterpillar TL943C Telehandler Operator Station specifications
Features
Vinyl suspension seat single electronic joystick spacious interior ergonomic cab
Service Refill Capacities
Caterpillar TL943C Telehandler Service Refill Capacities specifications
Fuel Tank
38.00 gal (143.83 l)
Hydraulic Tank
41.50 gal (157.08 l)
Tires
Caterpillar TL943C Telehandler Tires specifications
Optional Construction
13.00 x 24 Foam Filled or Rock Lug or Solid
Standard
13.00 x 24 12-PR
Transmission
Caterpillar TL943C Telehandler Transmission specifications
Max Speed - forward
20.40 mph (32.83 kph)
Number of Forward Gears
4
Number of Reverse Gears
3
Weights
Caterpillar TL943C Telehandler Weights specifications
Operating Weight
26,525.00 lbs (12,031.55 kg)
