Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
| Types (1) | Trunnion mounted planetary 55 degree steer axles. |
|---|---|
| Types (2) | High bias limited slip differential on front axle. |
| Boom Down | 8.5 s |
|---|---|
| Boom Up | 9.9 s |
| Tele In | 14.6 s |
| Tele Out | 14.5 s |
| Parking Brakes | Wet disc, spring applied hydraulic release on front axle |
|---|---|
| Service Brakes | Inboard wet disc brakes on front and rear axles |
| Engine Model | Cat C3.4B |
|---|---|
| Gross Power - Basic | 111.00 hp (82.77 kw) |
| Note | Meets U.S. EPA Tier 4 Final emission standards. |
| Auxiliary Hydraulic Flow | 25.00 gpm (94.63 lpm) |
|---|---|
| Auxiliary Hydraulic Pressure | 3481 psi |
| Note | Auxiliary Hydraulic Circuit used for all attachments equipped with cylinders or other hydraulic components. |
| Pump Type | Variable displacement load sensing axial piston pump |
| System Operating Pressure | 3770 psi |
| Capacity At Maximum Height (O/R Down) | 7,000.00 lbs (3,175.15 kg) |
|---|---|
| Capacity At Maximum Height (O/R Up) | 7,000.00 lbs (3,175.15 kg) |
| Capacity At Maximum Reach (O/R Down) | 2,700.00 lbs (1,224.70 kg) |
| Capacity At Maximum Reach (O/R Up) | 1,100.00 lbs (498.95 kg) |
| Drawbar Pull - Loaded | 21,582.00 lbs ft (29,260.88 nm) |
| Frame Leveling | 10 degrees |
| Maximum Lift Height | 43.00 ft (13.11 m) |
| Rated Load Capacity | 9,000.00 lbs (4,082.34 kg) |
| Top Travel Speed | 19.00 mph (30.58 kph) |
| Turning Radius - Over Tires | 12.00 ft (3.66 m) |
| Operating Weight | 26,852.00 lbs (12,179.88 kg) |
|---|
| Diesel Exhaust Fluid (Def) Tank | 5.70 gal (21.57 l) |
|---|---|
| Fuel Tank | 38.00 gal (143.83 l) |
| Hydraulic System | 49.00 gal (185.47 l) |
| Optional (1) | 370/75-28 Foam Duraforce |
|---|---|
| Optional (2) | 13.00 24 Solid |
| Optional (3) | 14 24-16 PR Air |
| Optional (4) | 14 24-12 PR Foam |
| Standard | 370/75-28 Duraforce MT |
| Forward | 4 speed |
|---|---|
| Reverse | 3 speed |
| Carriages - Dual Fork Positioning | 50.00 in (127.00 cm) |
|---|---|
| Carriages - Side Shift | 48.00 in (121.92 cm) |
| Carriages - Standard Rotate | 50.00 in (127.00 cm) |
| Carriages - Standard Tilt | 50.00 in (127.00 cm) |
| Carriages - Swing | 100 degrees, 1829 mm, 4028 kg Capacity, 2268 kg Swung (100 degrees, 72 in, 9,000 lb Capacity, 5,000 lb Swung) |
| Carriages - Wide Rotate | 72.00 in (182.88 cm) |
| Carriages - Wide Tilt | 72.00 in (182.88 cm) |
| Cubing Forks | [2] 1220 mm, 50 mm 50 mm ([2] 48 in, 2 in 2 in) |
| Hydraulic It Coupler | Includes Auxiliary Electrics |
| Lumber Forks - Option 1 | [2] 1525 mm, 45 mm 180 mm ([2] 60 in, 1.75 in 7 in) |
| Lumber Forks - Option 2 | [2] 1829 mm, 50 mm 150 mm ([2] 72 in, 2 in 6 in) |
| Pallet Forks - Option 1 | [2] 1525 mm, 60 mm 150 mm ([2] 60 in, 2.36 in 6 in) |
| Pallet Forks - Option 2 | [2] 1220 mm, 60 mm 100 mm ([2] 48 in, 2.36 in 4 in) |
| Pallet Forks - Option 3 | [2] 1220 mm, 60 mm 125 mm ([2] 48 in, 2.36 in 5 in) |