JCB 531-70 Telehandler Specs

Category: Telehandlers ➔
Manufacturer: JCB ➔
Model: 531-70 ➔

Dimensions

JCB 531-70 Telehandler Dimensions specifications
Dump Angle	37.5 degrees
Ground Clearance	1.32 ft (0.40 m)
Length To Fork Face	16.38 ft (4.99 m)
Overall Height	8.17 ft (2.49 m)
Turning Radius Outside Tires	12.14 ft (3.70 m)
Weight	15,564.64 lbs (7,060.01 kg)
Wheelbase	9.03 ft (2.75 m)
Width Over Tires	7.32 ft (2.23 m)

Engine

JCB 531-70 Telehandler Engine specifications
Aspiration	Naturally Aspirated
Displacement	268.60 cu in (4,401.58 cu cm)
Engine Make	2257
Engine Model	JCB EcoMAX T4i/IIIB
Gross Power	63.00 hp (46.98 kw)
Max Torque	320.00 lbs ft (433.86 nm)
Number Of Cylinders	4
Power Measured @	2200 rpm
Torque Measured @	1200 rpm

Hydraulic

JCB 531-70 Telehandler Hydraulic specifications
Pump Flow Capacity	43.10 gpm (163.13 lpm)
Pump Type	Two stage gear pump with suctio nstrainer and filter
Relief Valve Pressure	3500 psi

Hydraulic System

JCB 531-70 Telehandler Hydraulic System specifications
Bucket Crowd	2.9 sec
Dump Time	3.5 sec
Extend	6.8 sec
Hydraulic Pump	82 L
Lower Time	5.4 sec
Max Operating Pressure	241 bar
Raise Time	7.2 sec
Retract	5 sec

Lift

JCB 531-70 Telehandler Lift specifications
Max Forward Reach	12.14 ft (3.70 m)
Max Lift Capacity	6,988.66 lbs (3,170.01 kg)
Max Lift Height	22.97 ft (7.00 m)
Max Load At Max Height	2,400.00 lbs (1,088.62 kg)
Max Load At Max Reach	1,250.00 lbs (566.99 kg)

Operational

JCB 531-70 Telehandler Operational specifications
Alternator Supplied Amperage	95 amps
Fuel Capacity	39.10 gal (147.99 l)
Hydraulic System Fluid Capacity	29.90 gal (113.17 l)
Operating Voltage	12 V
Operating Weight	15,215.00 lbs (6,901.42 kg)
Tire Size	15.5/80-24

Transmission

JCB 531-70 Telehandler Transmission specifications
Lift Capacity At Full Reach	2,755.80 lbs (1,250.01 kg)
Lift Capacity To Full Height	5,291.10 lbs (2,400.01 kg)
Max Speed - Forward	17.00 mph (27.36 kph)
Max Speed - Reverse	17.00 mph (27.36 kph)
Number Of Forward Gears	4
Number Of Reverse Gears	4
Transmission Type	Powershift transmission incorporating torque converter

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon