Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
| Draft Sensing | Electronic Draft Control |
|---|---|
| Lift Capacity @ 24” | 6,393.50 lbs (2,900.05 kg) |
| Axle Output End | Flange |
|---|---|
| Final Drive | Inboard planetary |
| Service Brake | Wet disc |
|---|
| Height To Top Of Cab | 102.84 in (261.21 cm) |
|---|---|
| Length | 163.82 in (416.10 cm) |
| Overall Width | 83.00 in (210.82 cm) |
| Wheelbase | 7.71 ft (2.35 m) |
| Description | Swinging, Category 2 |
|---|
| Alternator | 120 amps |
|---|---|
| System | 12 V |
| Advertised Rated Engine Power | 105.00 hp (78.30 kw) |
|---|---|
| Aspiration | Turbocharged, air-to-air aftercooled |
| Block Design | Parent bore block |
| Bore | 3.90 in (9.91 cm) |
| Displacement | 207.50 cu in (3,400.32 cu cm) |
| Drive Wheels / Tracks | 4WD |
| Emissions Level | Tier 4A (Interim) |
| Engine Make | Case IH FPT |
| Engine Model | 3.4 L |
| Fan Drive Type | Belt |
| Fuel Injection | Direct |
| Fuel System | High Pressure Common Rail |
| Fuel System Control | Electronic |
| Fuel Tank Capacity | 37.00 gal (140.05 l) |
| Number Of Cylinders | 4 |
| Pto Horsepower | 91.20 hp (68.01 kw) |
| Pto Operational Type | Independent |
| Rated Engine Speed | 2300 rpm |
| Steering Configuration | Front Steer |
| Stroke | 4.40 in (11.18 cm) |
| Hydraulic System Type | Open Center |
|---|---|
| Implement Pump Flow | 15.90 gpm (60.18 lpm) |
| Main Pump Type | Dual gear |
| Number Of Remote Control Valves | 2 standard,3rd optional. |
| Front | No 2WD |
|---|---|
| Rear | 18.4 R30 R1W |
| Track Widths | 14.9 R24 R1W |
| Manufacturers Description | 12x12 Power Shuttle |
|---|---|
| Maximum Speed Forward | 24.90 mph (40.07 kph) |
| Number Of Forward Gears | 12F |
| Number Of Reverse Gears | 12R |
| Transmission Type | 4 Synchronized gears, 3 non-synch ranges |
| Weight With Maximum Ballast | 11,133.40 lbs (5,050.03 kg) |
|---|---|
| Weight Without Ballast | 9,369.70 lbs (4,250.03 kg) |