Case Ih STEIGER 485 Tractor Specs

Category: Tractors ➔
Manufacturer: Case Ih ➔
Model: STEIGER 485 ➔

Dimensions

Case Ih STEIGER 485 Tractor Dimensions specifications
Front Axle Clearance	44.90 in (114.05 cm)
Rear axle clearance	3.80 ft (1.16 m)
Wheelbase	12.80 ft (3.90 m)
Width Outside Frame	3.70 ft (1.13 m)

Engine

Case Ih STEIGER 485 Tractor Engine specifications
Aspiration	Turbocharged
Bore	5.40 in (13.72 cm)
Displacement	787.30 cu in (12,901.56 cu cm)
Engine Make	Iveco
Gross Power	485.00 hp (361.67 kw)
Number of Cylinders	6
Power Measured @	2000 rpm
PTO Power	429.00 hp (319.91 kw)
Stroke	6.00 in (15.24 cm)

Hydraulic System

Case Ih STEIGER 485 Tractor Hydraulic System specifications
Hydraulic System Type	Parallel pressure flow compensated
Number of Remote Control Valves	4 to 5
Pump Flow Capacity	40.00 gpm (151.40 lpm)

Operating Specifications

Case Ih STEIGER 485 Tractor Operating Specifications specifications
3 Point Hitch Lift Capacity @ 24 inches	19,620.00 lbs (8,899.49 kg)
3 Point Hitch Type	4N
Alternator Supplied Amperage	175 amps
Engine Oil Capacity	8.20 gal (31.04 l)
Front Tire Size	710/70R42
Fuel Capacity	300.00 gal (1,135.50 l)
Operating Voltage	12 volts
Operating Weight	54,000.10 lbs (24,494.06 kg)
Rear Tire Size	710/70R42

Transmission

Case Ih STEIGER 485 Tractor Transmission specifications
Max Speed - Forward	19.70 mph (31.70 kph)
Max Speed - Reverse	8.50 mph (13.68 kph)
Number of Forward Gears	16
Number of Reverse Gears	2
Transmission Type	Full power shift

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon