IMT 285 Tractor

Category: Tractors ➔
Manufacturer: IMT ➔
Model: 285 ➔

Dimensions

Height	5.60 ft (1.71 m)
Height - Top of Cab	8.30 ft (2.53 m)
Height - Top of ROPS/FOPS	8.30 ft (2.53 m)
Overall Length	13.20 in (33.53 cm)
Overall Width	6.80 ft (2.07 m)
Tire Size	front 12.4-24 rear 18.4/15-30
Wheelbase	7.60 ft (2.32 m)
Width Outside Frame	6.80 ft (2.07 m)

Engine

Displacement	247.80 cu in (4,060.72 cu cm)
Engine Model	A4-248
Gross Power	75.00 hp (55.93 kw)
Max Torque	205.10 lbs ft (278.07 nm)
Number of Cylinders	4
Power Measured @	2000 rpm
PTO Power	63.40 hp (47.28 kw)
Torque Measured @	1300 rpm

Hydraulic System

Pump Flow Capacity	4.50 gpm (17.03 lpm)
Relief Valve Pressure	3379.4 psi
Relief Valve Setting	3379.4 psi

Operating Specifications

3 Point Hitch Lift Capacity @ 24 inches	4,909.70 lbs (2,227.01 kg)
3 Point Hitch Type	cat. 2
Alternator Supplied Amperage	45 amps
Cooling System Fluid Capacity	3.80 gal (14.38 l)
Engine Oil Capacity	2.20 gal (8.33 l)
Fuel Capacity	23.80 gal (90.08 l)
Fuel Usage @ 75% Load, Full RPM	4.10 gph (15.52 lph)
Hydraulic System Fluid Capacity	11.40 gal (43.15 l)
Operating Voltage	12 volts
Tire Size Front - 2wd / 4wd	7.5-16
Turning Radius	12.50 ft (3.81 m)

Tires

Rear Tires Size

18.4/15-30

Transmission

Number of Forward Gears	8
Number of Reverse Gears	2
Transmission Type	sliding spur

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon