Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
| Country of Manufacture | USA — Starting 2026 Model Year |
|---|---|
| Date Collected | 4/3/2025 12:00:00 AM — Starting 2026 Model Year |
| Cooling System Capacity | 11.80 gal (44.66 l) — Starting 2026 Model Year |
|---|---|
| Crankcase Oil Volume | 6.10 gal (23.09 l) — Starting 2026 Model Year |
| Diesel Exhaust Fluid (DEF) Tank Capacity | 6.90 gal (26.12 l) — Starting 2026 Model Year |
| Fuel Tank Capacity | 122 (e23™), 135 (IVT™) gal. — Starting 2026 Model Year |
| Transmission - Hydraulic System | 42.30 gal (160.11 l) — Starting 2026 Model Year |
| Base Machine Weight | 25,133.00 lbs (11,400.15 kg) — Starting 2026 Model Year |
|---|---|
| Drawbar Ground Clearance | 18.20 in (46.23 cm) — Starting 2026 Model Year |
| Front Axle Ground Clearance | 26.30 in (66.80 cm) — Starting 2026 Model Year |
| Maximum Ballast Level | 135.00 lbs (61.24 kg) — Starting 2026 Model Year |
| Maximum Permissible Weight | 39,683.00 lbs (17,999.93 kg) — Starting 2026 Model Year |
| Overall Height | 137.60 in (349.50 cm) — Starting 2026 Model Year |
| Overall Length | 232.70 in (591.06 cm) — Starting 2026 Model Year |
| Wheelbase | 115.20 in (292.61 cm) — Starting 2026 Model Year |
| Drawbar Category | Category 4 — Starting 2026 Model Year |
|---|---|
| Maximum Vertical Load | Standard: Category 3: 1,837 kg (4,050 lb); Optional: Category 3 with heavy-duty support: 4,536 kg (10,000 lb) — Starting 2026 Model Year |
| Alternator Capacity | Standard: 210 amp, Optional: 250 amp — Starting 2026 Model Year |
|---|---|
| Battery Capacity | 2 x 950 CCA — Starting 2026 Model Year |
| Battery Cold Cranking Amps | 1900 CCA — Starting 2026 Model Year |
| Battery Voltage | 12 v — Starting 2026 Model Year |
| Driving Lights | Standard: 65-W halogen; Available: LED — Starting 2026 Model Year |
| Working Lights | Standard: 18 halogen; Available: 18 light-emitting diode (LED) and two halogen or 22 LED and two halogen — Starting 2026 Model Year |
| Aftertreatment Type | Diesel oxidation catalyst (DOC)/diesel particulate filter (DPF) — Starting 2026 Model Year |
|---|---|
| Aspiration | Single turbocharger, variable geometry turbo — Starting 2026 Model Year |
| Cylinder Liners | Wet-sleeve cylinder liners — Starting 2026 Model Year |
| Displacement | 549.00 cu in (8,996.52 cu cm) — Starting 2026 Model Year |
| Emissions Certifications | Final Tier 4 — Starting 2026 Model Year |
| Engine Family | MJDXL09.0319 — Starting 2026 Model Year |
| Engine Make | John Deere — Starting 2026 Model Year |
| Engine Torque at Rated Speed | 1,071.00 lbs ft (1,452.06 nm) — Starting 2026 Model Year |
| Fuel Type | Diesel — Starting 2026 Model Year |
| Intelligent Power Management (IPM) | Power boost: 29.6 hp / 22.1 kW / 30 PS (hp ISO) — Starting 2026 Model Year |
| Maximum Engine Power | 336 hp: (hp SAE) — Starting 2026 Model Year |
| Maximum Engine Torque | At 1600 rpm: 1452 Nm (1071 lb-ft) — Starting 2026 Model Year |
| Number of Cylinders | 6 — Starting 2026 Model Year |
| Rated Engine Power | 306 hp: (hp SAE) — Starting 2026 Model Year |
| Rated Engine Speed | 2100 rpm — Starting 2026 Model Year |
| Torque Rise | 40 % — Starting 2026 Model Year |
| Front Axle Differential Lock | 1300 Series MFWD: Limited slip; TLS: Limited slip; TLS with front brakes: Full-locking electrohydraulic (actuated at same time as rear diff lock) — Starting 2026 Model Year |
|---|---|
| Front Axle Type | Standard: 1300 Series MFWD: tread range 1524 to 2235 mm (60 to 88 in.); Optional: TLS: Tread range 1524 to 2235 mm; TLS with front brakes available with 40 km/h (24.9 mph); TLS with front brakes standard with 50 km/h (31 mph) — Starting 2026 Model Year |
| Electric Power | Seven-pin connector — Starting 2026 Model Year |
|---|---|
| Front Hitch Category | Category 3N, ground engaging — Starting 2026 Model Year |
| Lift Capacity Through Full Lift Range at Coupling Points | 6,945.00 lbs (3,150.20 kg) — Starting 2026 Model Year |
| Maximum Lift Capacity at Coupling Points | 11,464.00 lbs (5,199.99 kg) — Starting 2026 Model Year |
| Number of Front Selective Control Valves (SCVs) | One with front hitch — Starting 2026 Model Year |
| Engine rpm (at Rated PTO Speeds) | 1940 rpm — Starting 2026 Model Year |
|---|---|
| Front Number of Splines | 21 — Starting 2026 Model Year |
| Front PTO Rotation | Counter-clockwise — Starting 2026 Model Year |
| PTO Speed | 1000 — Starting 2026 Model Year |
| Available Flow at a Single Rear SCV | 35 gpm (132 L/min) — Starting 2026 Model Year |
|---|---|
| Available Flow at Front SCVs | 33.00 gpm (124.91 lpm) — Starting 2026 Model Year |
| Hydraulic System Type | Closed-center, pressure/flow compensated system with load sensing — Starting 2026 Model Year |
| Number of Mid Selective Control Valves (SCVs) | 3 — Starting 2026 Model Year |
| Number of Rear Selective Control Valves (SCVs) | Standard: Four SCVs; Optional: Three to five ISO couplers: 12.7 mm (1/2 in.); Five ISO couplers (SCV 1-5: 12.7-mm [1/2-in.] coupler) — Starting 2026 Model Year |
| Pump Rated Output | Standard: 63 cc: 162 L/min (43 gpm); Optional: 85 cc: 222.3 L/min (59 gpm) — Starting 2026 Model Year |
| SCV Control | Electronic — Starting 2026 Model Year |
| Base Machine Weight | 25,133.00 lbs (11,400.15 kg) — Starting 2026 Model Year |
|---|---|
| Displacement | 549.00 cu in (8,996.52 cu cm) — Starting 2026 Model Year |
| Engine Family | MJDXL09.0319 — Starting 2026 Model Year |
| Engine Make | John Deere — Starting 2026 Model Year |
| Maximum Engine Power | 336 hp: (hp SAE) — Starting 2026 Model Year |
| Pump Rated Output | Standard: 63 cc: 162 L/min (43 gpm); Optional: 85 cc: 222.3 L/min (59 gpm) — Starting 2026 Model Year |
| Rated Engine Power | 306 hp: (hp SAE) — Starting 2026 Model Year |
| Rear Hitch Category (SAE Designation) | Standard: Category 3N/3 with Quik-Coupler; Optional: Category 3/3N with hook ends, Category 4N/3 with Quik-Coupler; Category 4N/3 with hook ends — Starting 2026 Model Year |
| Transmission Type | John Deere e23™ 42 km/h (26 mph); Optional: John Deere e23™ Transmission 50 km/h (31 mph), John Deere Infinitely Variable Transmission (IVT™) 0.050-42 km/h (0.030-26 mph), John Deere Infinitely Variable Transmission (IVT) 0.050-50 km/h (0.030- 31 mph) — Starting 2026 Model Year |
| Drive Type | 4WD — Starting 2026 Model Year |
|---|---|
| Wheel or Track Configuration | Wheel — Starting 2026 Model Year |
| Cab Glass Area | 70.61 sq ft — Starting 2026 Model Year |
|---|---|
| Cab Suspension | Adjustable cab suspension (Optional) — Starting 2026 Model Year |
| Degree of Seat Swivel, Left Hand | 8 degree (angle) — Starting 2026 Model Year |
| Degree of Seat Swivel, Right Hand | 40 degree (angle) — Starting 2026 Model Year |
| Inner Cab Volume | 114.0 cu ft — Starting 2026 Model Year |
| Instructional Seat | Standard — Starting 2026 Model Year |
| Primary Display | G5 - 12.8 in. (32.5 cm) — Starting 2026 Model Year |
| Radio | AM/FM stereo with weatherband, remote controls, auxiliary input jack, four speakers and external antenna — Starting 2026 Model Year |
| Seat Suspension | Air seat (Standard), ActiveSeat™ II (Optional) — Starting 2026 Model Year |
| Final Drive | Inboard planetary three pinion — Starting 2026 Model Year |
|---|---|
| Rear Axle Type | Standard: Rack-and-pinion or flange axles; Optional: Diameter: 110 x 2550 mm (4.33 x 100.4 in.); Diameter: 110 x 3010 mm (4.33 x 118.5 in.); Diameter: 120 x 2550 mm (4.72 x 100.4 in.); Diameter: 120 x 3010 mm (4.72 x 118.5 in.); Flanged Axle: 335 mm (13.2 in.) — Starting 2026 Model Year |
| Rear Differential Lock | Full-locking electrohydraulic — Starting 2026 Model Year |
| Lift Capacity Through Full Lift Range at 610-mm Behind Hitch Point | 15212 lb 6900 kg — Starting 2026 Model Year |
|---|---|
| Lift Capacity Through Full Lift Range at Coupling Points | 6945 — Starting 2026 Model Year |
| Maximum Lift Capacity at 610-mm Behind Hitch Point | 17306 — Starting 2026 Model Year |
| Maximum Lift Capacity Directly at Coupling Points | 22258 — Starting 2026 Model Year |
| Rear Hitch Category (SAE Designation) | Standard: Category 3N/3 with Quik-Coupler; Optional: Category 3/3N with hook ends, Category 4N/3 with Quik-Coupler; Category 4N/3 with hook ends — Starting 2026 Model Year |
| Sensing Type | Electrohydraulic — Starting 2026 Model Year |
| Engagement Method | Electric switch with adjustable modulation — Starting 2026 Model Year |
|---|---|
| Engine rpm at Rated PTO Speeds (540/1.000) | 1950 — Starting 2026 Model Year |
| Engine rpm at Rated PTO Speeds (540E/1000/1.000E) | 1750 — Starting 2026 Model Year |
| Number of Splines | 20 — Starting 2026 Model Year |
| PTO Category | Independent; Standard: 44.45 mm (1.75 in.) 20-spline, 1,000 rpm; Optional: 44.45 mm (1.75 in.), 20-spline, 1,000 rpm capable of 35 mm (1.375 in.) 540/1000 rpm; 44.45 mm (1.75 in.) 20-spline, 1,000 rpm with 35 mm (1.375 in.) 540E/1000/1000E rpm gearcase; 44.45 mm (1.75 in.) 20-spline, 1,000 rpm with 35 mm (1.375 in.) 540/540E/1000 rpm gearcase — Starting 2026 Model Year |
| Rated PTO Power | 260.00 hp (193.89 kw) — Starting 2026 Model Year |
| Steering Type | Hydraulic power-steering with electric pump back-up; Optional: ActiveCommand Steering 2 (ACS2) w/ electronic back-up pump — Starting 2026 Model Year |
|---|
| Connectivity | JDLink™ — Starting 2026 Model Year |
|---|---|
| Guidance | Integrated AutoTrac™ — Starting 2026 Model Year |
| Remote Diagnostics | ServiceADVISOR™ Remote: available with JDLink hardware and activations; Remote Display Access: available with JDLink hardware and activations — Starting 2026 Model Year |
| Rear Tires Size | RCI Group 48/49 — Starting 2026 Model Year |
|---|
| Maximum Speed Forward | 31.00 mph (49.89 kph) — Starting 2026 Model Year |
|---|---|
| Minimum Speed Forward | 0.03 mph (0.05 kph) — Starting 2026 Model Year |
| Transmission Type | John Deere e23™ 42 km/h (26 mph); Optional: John Deere e23™ Transmission 50 km/h (31 mph), John Deere Infinitely Variable Transmission (IVT™) 0.050-42 km/h (0.030-26 mph), John Deere Infinitely Variable Transmission (IVT) 0.050-50 km/h (0.030- 31 mph) — Starting 2026 Model Year |