Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
| Turning Radius Without Brakes 1 | 18.21 ft (5.55 m) |
|---|---|
| Wheelbase | 149.89 ft (45.69 m) |
| Cylinder Liners | Wet-sleeve |
|---|---|
| Displacement | 548.00 cu in (8,980.13 cu cm) |
| Engine Manufacturer | John Deere |
| Fuel Tank Capacity | 310.00 gal (1,173.35 l) |
| Availability | Front and Rear Standard |
|---|---|
| Axle Type | Single reduction |
| Differential Controls | Full-locking electrohydraulic |
| Final Drive Type | Inboard planetary |
| Hitch Category (Sae Designation) | 4N/Cat. 3, 4N/Cat. 4 |
|---|---|
| Hitch Draft Control Load Sense Type | Electrohydraulic |
| Hitch Lift Cap | 15,000.00 lbs (6,803.89 kg) |
| Hydraulic Type | Closed-center |
| Maximum Operating Pressure | 2900 psi |
| Pump Rated Output | 115.00 gpm (435.28 lpm) |
| Rated Flow @ One Scv | 42.00 gpm (158.97 lpm) |
| Sensing Type | Electrohydraulic |
| Pump Flow Capacity | 58.20 gpm (220.29 lpm) |
|---|
| Ballasting Restrictions | 48,700.00 lbs (22,089.98 kg) |
|---|---|
| Country Of Manufacture | Waterloo, Iowa, USA |
| Cab | Doors One - left handSeat Suspension System Standard: Air Optional: Active Seat |
|---|
| Advertised Engine | 370.00 hp (275.91 kw) |
|---|---|
| Advertised Pto | 335.00 hp (249.81 kw) |
| Max Torque Rise | 38 % |
| Pto Actuation | Electronic |
|---|---|
| Pto Speed | 1000 rpm |
| 4wd | 620/70R46 in. 167A8 R1W radial in dual wheel configuration |
|---|
| On-The-Go Shifting (Yes/No/Partial) | Yes |
|---|---|
| Reverser | No |
| Standard Transmission; Forward/Reverse | e18? 18-speed PowerShift 40 kph (25 mph); 18F, 6R with Efficiency Manager? |