Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
| Category 4n/3 With Quik-Coupler | Available: 15000 lb (6804 kg) , Available: 20000 lb (9072 kg) , Available: 15000 lb (6804 kg), Available: 20000 lb (9072 kg) |
|---|---|
| Description | Electric-Hydraulic 3-Point Hitch with Draft Sensing |
| 120 Mm Flanged | Standard |
|---|---|
| Description | Bull gear and double idler with floating pinion. |
| Front Axle Supports | Available (with sprayer tanks or dozer blade) |
| Rear Axle Supports | Available (with 30 or 36 in. tracks) |
| Cooling System | 14.90 gal (56.40 l) |
|---|---|
| Crankcase Oil Volume | 12.70 gal (48.07 l) |
| Def Tank | 22.00 gal (83.27 l) |
| Fuel Tank - Diesel | 400.00 gal (1,514.00 l) |
| Hydraulic/Transmission/Axle Oil With 3-Point Rear Hitch And Pto | 60.00 gal (227.10 l) |
| Hydraulic/Transmission/Axle Oil Without 3-Point Rear Hitch And Pto | 58.00 gal (219.53 l) |
| Alternator (12-V) | 200 amps / 12 Volt – 240 amps / 12 Volt optional |
|---|---|
| Battery | 925 CCA-3 |
| Aspiration | Dual series turbocharger w/fixed geometry first stage-variable geometry second stage - air-toair aftercooling and cooled exhaust gas recirculation |
|---|---|
| Bore And Stroke | 5.2 in. (132 mm) x 6.5 in. (165 mm |
| Compression Ratio | 16:0:1 |
| Displacement | 824.00 cu in (13,502.97 cu cm) |
| Engine Manufacturer | John Deere PowerTech™ PSS 13.5L |
| Max Power | 517.00 hp (385.53 kw) |
| Power Boost (Available In Transport And/Or Mobile Pto Applications) | 10 percent |
| Rated Power | 470.00 hp (350.48 kw) |
| Rated Pto Power | 335.00 hp (249.81 kw) |
| Torque Rise | 38 % |
| Description | Electronically controlled, electronic unit injectors (self priming) |
|---|---|
| Filter Primary | 10 micron replaceable cartridge w/water indication sensor and drain |
| Filter Secondary | 2 micron spin-on element |
| Filter System | Two Stage with water separator and service indicator light |
| Available Flow At A Single Scv - 1 /2 In Coupler | 35.00 gpm (132.48 lpm) |
|---|---|
| Available Flow At A Single Scv With High-Flow - 3 /4 In Coupler | 42.00 gpm (158.97 lpm) |
| Description | Closed-center, pressure/flow compensated |
| Maximum Operating Pressure | 2900 psi |
| Maximum Pump Flow With Base Hydraulics | 58.00 gpm (219.53 lpm) |
| Maximum Pump Flow: High-Flow | 115.00 gpm (435.28 lpm) |
| Scv Control | 4 - 6 factory, up to 8 field installed |
| Active Command Steering (Acs) | Available |
|---|---|
| Hydraulic Power-Steering | Standard |
| Description | e18™ 18-speed PowerShift 40 kph (25 mph); 18F, 6R with Efficiency Manager™ |
|---|
| Turning Radius | 21.0 ft (6400 mm) on Ag models / 30.0 ft (9144 mm) on Scraper Special models |
|---|---|
| Wheelbase Length | 4,154.00 in (10,551.16 cm) |