Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
| 120 Mm Flanged | Standard |
|---|---|
| Description | Bull gear and double idler with floating pinion. |
| Front Axle Supports | Standard |
| Rear Axle Supports | Standard |
| Cooling System | 16.30 gal (61.70 l) |
|---|---|
| Crankcase Oil Volume | 11.50 gal (43.53 l) |
| Def Tank | 22.00 gal (83.27 l) |
| Fuel Tank - Diesel | 400.00 gal (1,514.00 l) |
| Hydraulic/Transmission/Axle Oil Without 3-Point Rear Hitch And Pto | 59.00 gal (223.32 l) |
| Alternator (12-V) | 200 amps / 12 Volt – 240 amps / 12 Volt optional |
|---|---|
| Battery | 925 CCA-4 |
| Aspiration | Single Variable geometry turbocharger air-to-air aftercooling and cooled exhaust gas recirculation |
|---|---|
| Bore And Stroke | 5.39 in (137mm) x 6.65 in (169mm) |
| Compression Ratio | 17.2:1 |
| Displacement | 912.00 cu in (14,945.04 cu cm) |
| Engine Manufacturer | Cummins QSX15 |
| Lubrication | Full-pressure, full-flow filtration with bypass |
| Max Power | 628.00 hp (468.31 kw) |
| Power Boost (Available In Transport And/Or Mobile Pto Applications) | 10 percent |
| Rated Power | 570.00 hp (425.06 kw) |
| Rated Pto Power | 335.00 hp (249.81 kw) |
| Torque Rise | 38 % |
| Description | High Pressure Common Rail (self priming) |
|---|---|
| Filter Primary | 7 micron spin-on style with water in fuel sensor an |
| Filter Secondary | 3 micron spin-on element |
| Filter System | Two Stage with water separator and service indicator light |
| Available Flow At A Single Scv With High-Flow - 3 /4 In Coupler | 42.00 gpm (158.97 lpm) |
|---|---|
| Description | Closed-center, pressure/flow compensated |
| Maximum Operating Pressure | 2900 psi |
| Maximum Pump Flow With Base Hydraulics | 58.00 gpm (219.53 lpm) |
| Maximum Pump Flow: High-Flow | 115.00 gpm (435.28 lpm) |
| Scv Control | 4 Standard, 6 Available |
| Active Command Steering (Acs) | Available |
|---|---|
| Hydraulic Power-Steering | Standard |
| Description | e18™ 18-speed PowerShift 40 kph (25 mph); 18F, 6R with Efficiency Manager™ |
|---|
| Turning Radius | 21.0 ft (6400 mm) on Ag models / 30.0 ft (9144 mm) on Scraper Special models |
|---|---|
| Wheelbase Length | 4,154.00 in (10,551.16 cm) |