Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
| Country of Manufacture | USA — Starting 2026 Model Year |
|---|---|
| Date Collected | 4/3/2025 12:00:00 AM — Starting 2026 Model Year |
| Cooling System Capacity | 14.90 gal (56.40 l) — Starting 2026 Model Year |
|---|---|
| Crankcase Oil Volume | 16.90 gal (63.97 l) — Starting 2026 Model Year |
| Diesel Exhaust Fluid (DEF) Tank Capacity | 31.70 gal (119.98 l) — Starting 2026 Model Year |
| Fuel Tank Capacity | 400.00 gal (1,514.00 l) — Starting 2026 Model Year |
| Transmission - Hydraulic System | With 3-point hitch and PTO: 60 Without 3-point hitch and PTO: 58 gal. — Starting 2026 Model Year |
| Base Machine Weight | 40,660.00 lbs (18,443.09 kg) — Starting 2026 Model Year |
|---|---|
| Drawbar Ground Clearance | 20.70 in (52.58 cm) — Starting 2026 Model Year |
| Maximum Ballast Level | 67,000.00 lbs (30,390.73 kg) — Starting 2026 Model Year |
| Overall Length | 312.80 in (794.51 cm) — Starting 2026 Model Year |
| Wheelbase | 154.00 in (391.16 cm) — Starting 2026 Model Year |
| Drawbar Category | Category 5 — Starting 2026 Model Year |
|---|---|
| Maximum Vertical Load | 12,000 lb / 5440 kg — Starting 2026 Model Year |
| Alternator Capacity | Standard: 250 amp; Optional: 330 amp — Starting 2026 Model Year |
|---|---|
| Battery Cold Cranking Amps | 2850 CCA — Starting 2026 Model Year |
| Battery Voltage | 12 v — Starting 2026 Model Year |
| Driving Lights | Halogen, 65 W; Optional: LED — Starting 2026 Model Year |
| Working Lights | Standard: 20 halogen; Optional: 20 or 24 light-emitting diode (LED) — Starting 2026 Model Year |
| Aftertreatment Type | Diesel oxidation catalyst (DOC)/selective catalytic reduction (SCR) — Starting 2026 Model Year |
|---|---|
| Alternative Fuel Type | B20 diesel compatible — Starting 2026 Model Year |
| Aspiration | Dual series turbocharger with fixed geometry first stage and wastegated second stage; air-to-air aftercooling and cooled exhaust gas recirculation (EGR) — Starting 2026 Model Year |
| Cylinder Liners | Wet-sleeve — Starting 2026 Model Year |
| Displacement | 827.00 cu in (13,552.13 cu cm) — Starting 2026 Model Year |
| Emissions Certifications | Final Tier 4 (FT4) — Starting 2026 Model Year |
| Engine Family | MJDXL13.5334 — Starting 2026 Model Year |
| Engine Make | John Deere — Starting 2026 Model Year |
| Engine Model | JD14 — Starting 2026 Model Year |
| Engine Torque at Rated Speed | 2,008.00 lbs ft (2,722.45 nm) — Starting 2026 Model Year |
| Fuel Type | Diesel — Starting 2026 Model Year |
| Maximum Engine Power | 649 PS: (hp ISO) — Starting 2026 Model Year |
| Maximum Engine Torque | At 1550 rpm: 2008 Nm / 2723 lb-ft — Starting 2026 Model Year |
| Number of Cylinders | 6 — Starting 2026 Model Year |
| Power Bulge | 10 % — Starting 2026 Model Year |
| Rated Engine Power | 590 PS: (hp ISO) — Starting 2026 Model Year |
| Rated Engine Speed | 2100 rpm — Starting 2026 Model Year |
| Torque Rise | 38 % — Starting 2026 Model Year |
| Front Axle Differential Lock | Full-locking electrohydraulic — Starting 2026 Model Year |
|---|---|
| Front Axle Type | Diameter: 120 x 3048 mm (4.72 x 120 in.) — Starting 2026 Model Year |
| Available Flow at a Single Rear SCV | 1.3-cm (1/2-in.) couplers: 132 L/min (35 gpm); 1.9-cm (3/4-in.) couplers: 170 L/min (45 gpm) — Starting 2026 Model Year |
|---|---|
| Hydraulic System Type | Closed-center, pressure-and-flow compensated — Starting 2026 Model Year |
| Number of Rear Selective Control Valves (SCVs) | Four to six factory or field installed; Base: four 1.3-cm (1/2-in.) couplers; Optional: five to six 1.3-cm (1/2-in.) couplers factory installed; Optional: three 1.9-cm (3/4-in.) couplers plus three 1.3-cm (1/2-in.) couplers factory installed — Starting 2026 Model Year |
| Pump Rated Output | 208 L/min / 55 gpm (Standard); 416 L/min / 110 gpm (Optional) — Starting 2026 Model Year |
| SCV Control | Electronic — Starting 2026 Model Year |
| Base Machine Weight | 40,660.00 lbs (18,443.09 kg) — Starting 2026 Model Year |
|---|---|
| Displacement | 13.6 L — Starting 2026 Model Year |
| Engine Family | MJDXL13.5334 — Starting 2026 Model Year |
| Engine Make | John Deere — Starting 2026 Model Year |
| Engine Model | JD14 — Starting 2026 Model Year |
| Maximum Engine Power | 640 hp: (hp SAE) — Starting 2026 Model Year |
| Pump Rated Output | 208 L/min / 55 gpm (Standard); 416 L/min / 110 gpm (Optional) — Starting 2026 Model Year |
| Rated Engine Power | 582 hp: (hp SAE) — Starting 2026 Model Year |
| Rear Hitch Category (SAE Designation) | Category 4N/4: 6804 kg (15,000 lb); Category 4N/4: 9072 kg (20,000 lb) — Starting 2026 Model Year |
| Transmission Type | John Deere e18™ 18-speed PowerShift™ with Efficiency Manager — Starting 2026 Model Year |
| Drive Type | 4WD — Starting 2026 Model Year |
|---|---|
| Wheel or Track Configuration | Wheel — Starting 2026 Model Year |
| Cab Glass Area | 71.47 sq ft — Starting 2026 Model Year |
|---|---|
| Degree of Seat Swivel, Left Hand | 8 degree (angle) — Starting 2026 Model Year |
| Degree of Seat Swivel, Right Hand | 40 degree (angle) — Starting 2026 Model Year |
| Inner Cab Volume | 115.0 cu ft — Starting 2026 Model Year |
| Instructional Seat | Standard — Starting 2026 Model Year |
| Primary Display | G5 Plus CommandCenter™: 32.5 cm (12.8 in.) — Starting 2026 Model Year |
| Radio | AM/FM stereo with weatherband, remote controls, auxiliary input jack, four speakers and external antenna; Optional: Touchscreen radio — Starting 2026 Model Year |
| Seat Suspension | Air suspension; Optional: ActiveSeat™ II — Starting 2026 Model Year |
| Final Drive | Inboard planetary with double-reduction axle — Starting 2026 Model Year |
|---|---|
| Rear Axle Type | Diameter: 120 x 3048 mm (4.72 x 120 in.) — Starting 2026 Model Year |
| Rear Differential Lock | Full-locking electrohydraulic — Starting 2026 Model Year |
| Maximum Lift Capacity Directly at Coupling Points | 20.000 — Starting 2026 Model Year |
|---|---|
| Rear Hitch Category (SAE Designation) | Category 4N/4: 6804 kg (15,000 lb); Category 4N/4: 9072 kg (20,000 lb) — Starting 2026 Model Year |
| Sensing Type | Electrohydraulic with draft sensing — Starting 2026 Model Year |
| Engagement Method | Electrohydraulic — Starting 2026 Model Year |
|---|---|
| Number of Splines | 20 — Starting 2026 Model Year |
| PTO Category | Independent, 44 mm (1.75 in.) 20-spline, 1000 rpm — Starting 2026 Model Year |
| Rated PTO Power | 340 PS — Starting 2026 Model Year |
| Steering Type | Hydraulic power steering; Optional: ActiveCommand Steering (ACS™) — Starting 2026 Model Year |
|---|
| Connectivity | Available with JDLink™ hardware, activations, and Ethernet harnesses (availability dependent upon destination) — Starting 2026 Model Year |
|---|---|
| Guidance | Integrated AutoTrac™; Autonomy Ready (available in select regions) — Starting 2026 Model Year |
| Remote Diagnostics | Available with activated JDLink hardware and activations — Starting 2026 Model Year |
| Maximum Speed Forward | 40 km/h / 25 mph — Starting 2026 Model Year |
|---|---|
| Transmission Type | John Deere e18™ 18-speed PowerShift™ with Efficiency Manager — Starting 2026 Model Year |