Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
| Country of Manufacture | USA — Starting 2026 Model Year |
|---|---|
| Date Collected | 4/3/2025 12:00:00 AM — Starting 2026 Model Year |
| Cooling System Capacity | 30.90 gal (116.96 l) — Starting 2026 Model Year |
|---|---|
| Crankcase Oil Volume | 18.90 gal (71.54 l) — Starting 2026 Model Year |
| Fuel Tank Capacity | 515.00 gal (1,949.28 l) — Starting 2026 Model Year |
| Transmission - Hydraulic System | 53 / 60 gal. — Starting 2026 Model Year |
| Base Machine Weight | 76,000.00 lbs (34,473.06 kg) — Starting 2026 Model Year |
|---|---|
| Drawbar Ground Clearance | 22.30 in (56.64 cm) — Starting 2026 Model Year |
| Maximum Ballast Level | 84,000.00 lbs (38,101.81 kg) — Starting 2026 Model Year |
| Overall Length | 349.20 in (886.97 cm) — Starting 2026 Model Year |
| Wheelbase | 181.90 in (462.03 cm) — Starting 2026 Model Year |
| Drawbar Category | Category 5 — Starting 2026 Model Year |
|---|---|
| Maximum Vertical Load | 19000 lb / 8618 kg — Starting 2026 Model Year |
| Alternator Capacity | 330 amp — Starting 2026 Model Year |
|---|---|
| Battery Cold Cranking Amps | 4750 CCA — Starting 2026 Model Year |
| Battery Voltage | 12 v — Starting 2026 Model Year |
| Driving Lights | Select Visibility: Halogen: 65 W; Premium and Ultimate Visibility: LED — Starting 2026 Model Year |
| Working Lights | 18 halogen; Optional: 20 or 24 light-emitting diode (LED) — Starting 2026 Model Year |
| Aftertreatment Type | Exhaust Gas Recirculation (EGR) - No Diesel Exhaust Fluid (DEF) used — Starting 2026 Model Year |
|---|---|
| Alternative Fuel Type | B30 Diesel Compatible — Starting 2026 Model Year |
| Aspiration | Dual turbochargers in series; Primary fixed displacement turbocharger and secondary wastegated turbocharger, air-to-air aftercooling, and cooled exhaust gas recirculation (EGR) — Starting 2026 Model Year |
| Cylinder Liners | Wet-sleeve — Starting 2026 Model Year |
| Displacement | 1,098.00 cu in (17,993.04 cu cm) — Starting 2026 Model Year |
| Emissions Certifications | Final Tier 4 (FT4) / Stage V Compliant Diesel Engine — Starting 2026 Model Year |
| Engine Family | VJDXL18.0342 — Starting 2026 Model Year |
| Engine Make | John Deere — Starting 2026 Model Year |
| Engine Model | JD18 — Starting 2026 Model Year |
| Engine Torque at Rated Speed | 3,123.00 lbs ft (4,234.16 nm) — Starting 2026 Model Year |
| Fuel Type | Diesel — Starting 2026 Model Year |
| Intelligent Power Management (IPM) | 40 hp at rated engine RPM — Starting 2026 Model Year |
| Maximum Engine Power | 819 hp: (hp SAE) — Starting 2026 Model Year |
| Maximum Engine Power PS (HP ISO) at Maximum Engine Speed (EU 2016/1628) | 913.00 hp (680.84 kw) — Starting 2026 Model Year |
| Maximum Engine Torque | At 1400 rpm: 4234 Nm / 3123 lb-ft — Starting 2026 Model Year |
| Number of Cylinders | 6 — Starting 2026 Model Year |
| Power Bulge | 10 % — Starting 2026 Model Year |
| Rated Engine Power | 830 PS: (hp ISO) — Starting 2026 Model Year |
| Rated Engine Speed | 1900 rpm — Starting 2026 Model Year |
| Torque Rise | 38 % — Starting 2026 Model Year |
| Front Axle Differential Lock | Full-locking electrohydraulic — Starting 2026 Model Year |
|---|
| Available Flow at a Single Rear SCV | 1.3-cm (1/2 in.) couplers: 140 L/min (35 gpm); 1.9-cm (3/4-in.) couplers: 180 L/min (44 gpm) — Starting 2026 Model Year |
|---|---|
| Hydraulic System Type | Axial piston, closed-center, pressure-and-flow compensated, naturally-aspirated — Starting 2026 Model Year |
| Number of Rear Selective Control Valves (SCVs) | Base: four 1.3-cm (1/2-in.) couplers; Optional: five or six 1.3-cm (1/2-in.) couplers; Optional: three 1.9-cm (3/4-in.) couplers and three 1.3-cm (1/2-in.) couplers; 7th and 8th SCV options are available as field install kits — Starting 2026 Model Year |
| Pump Rated Output | Single: 212 L/min (56 gpm); Dual: 424 L/min (112 gpm); Triple: 636 L/min (168 gpm) — Starting 2026 Model Year |
| SCV Control | Electronic — Starting 2026 Model Year |
| Base Machine Weight | 76,000.00 lbs (34,473.06 kg) — Starting 2026 Model Year |
|---|---|
| Displacement | 18.0 L — Starting 2026 Model Year |
| Engine Family | VJDXL18.0342 — Starting 2026 Model Year |
| Engine Make | John Deere — Starting 2026 Model Year |
| Engine Model | JD18 — Starting 2026 Model Year |
| Maximum Engine Power | 819 hp: (hp SAE) — Starting 2026 Model Year |
| Pump Rated Output | Single: 212 L/min (56 gpm); Dual: 424 L/min (112 gpm); Triple: 636 L/min (168 gpm) — Starting 2026 Model Year |
| Rated Engine Power | 819 hp: (hp SAE) — Starting 2026 Model Year |
| Transmission Type | John Deere e21 21-speed PowerShift; 21F, 11R with Efficiency Manager — Starting 2026 Model Year |
| Drive Type | 4WD — Starting 2026 Model Year |
|---|---|
| Wheel or Track Configuration | 4-Track — Starting 2026 Model Year |
| Cab Glass Area | 73.81 sq ft — Starting 2026 Model Year |
|---|---|
| Cab Suspension | Standard — Starting 2026 Model Year |
| Degree of Seat Swivel, Left Hand | 8 degree (angle) — Starting 2026 Model Year |
| Degree of Seat Swivel, Right Hand | 40 degree (angle) — Starting 2026 Model Year |
| Inner Cab Volume | 119.0 cu ft — Starting 2026 Model Year |
| Instructional Seat | Standard — Starting 2026 Model Year |
| Primary Display | G5???? CommandCenter™: 12.8 in. (32.5 cm) — Starting 2026 Model Year |
| Radio | Varies by comfort and convenience package — Starting 2026 Model Year |
| Final Drive | Outboard planetary with three planetary gears — Starting 2026 Model Year |
|---|---|
| Rear Differential Lock | Full-locking electrohydraulic — Starting 2026 Model Year |
| Engagement Method | Electrohydraulic — Starting 2026 Model Year |
|---|---|
| Number of Splines | 20 — Starting 2026 Model Year |
| PTO Category | 45 mm (1.75 in.) 20-spline, 1000 rpm — Starting 2026 Model Year |
| Rated PTO Power | 335.00 hp (249.81 kw) — Starting 2026 Model Year |
| Steering Type | John Deere ActiveCommand Steering (ACS™) — Starting 2026 Model Year |
|---|
| Connectivity | Available with JDLink™ hardware, activations, and Ethernet harnesses (availability dependent upon destination) — Starting 2026 Model Year |
|---|---|
| Guidance | Integrated AutoTrac™; Available with Autonomy Ready — Starting 2026 Model Year |
| Remote Diagnostics | Available with activated JDLink hardware and activations — Starting 2026 Model Year |
| Number Of Mid Rollers | 3 — Starting 2026 Model Year |
|---|---|
| Track Drive Type | Camso ® Ag 3500 or 6500 Tracks — Starting 2026 Model Year |
| Track Tread Spacing | Only compatible with 762 mm (30 in.) tracks: 2235 mm (88 in.); Optional: 3048 mm (120 in.) — Starting 2026 Model Year |
| Track Width | Standard: 762 mm (30 in.); Optional - only compatible with 3048 mm (120 in.) spacing: 914 mm (36 in.) — Starting 2026 Model Year |
| Maximum Speed Forward | 25 mph / 40 km/h — Starting 2026 Model Year |
|---|---|
| Transmission Type | John Deere e21 21-speed PowerShift; 21F, 11R with Efficiency Manager — Starting 2026 Model Year |