All Equipment Category Specs ↠ Truck Cranes ↠ Link-Belt HTC-840

Link-Belt HTC-840 Truck Crane

Category: Truck Cranes (See all Truck Cranes for sale)
Manufacturer: Link-Belt (See all Link-Belt Equipment for sale)
Model: HTC-840 (See all Link-Belt HTC-840 for sale)

Boom

Max Elevating Angle	78 degrees
Max Height @ Max Raise Angle - no jib	85 ft (26 m)
Min Height @ Max Raise Angle	35 ft (11 m)
Number of Sections	3
Swing Speed	2.5 rpm

CARRIER ENGINE

bore	4 in (11 cm)
Displacement	505 cu in (8,267 cu cm)
Gross Power	234 hp (174 kw)
Make	Link-Belt
Max Torque	640 lbs ft (868 nm)
Model	6CTA 8.3
Number of cylinders	6
Power Measured @	2200 rpm
Stroke	6 in (14 cm)

Dimensions

Carrier Length	37 ft (11 m)
Ground Clearance	1 ft (0 m)
Transport Height	11 ft (3 m)
Transport Length	46 ft (14 m)
Transport Width	8 ft (2 m)
Upper Structure Tail Swing Radius	14 ft (4 m)
Width w/ Outriggers Extended	22 ft (7 m)

Operating Specifications

Alternator Supplied Amperage	80 amps
Carrier Fuel Capacity	100 gal (379 l)
Operating Voltage	24 volts
Operating Weight	62,100 lbs (28,168 kg)
Tire Size	Front - 15.0 x 22.5 (16 PR), Rear - 11.0 x 20.0 (14 PR)
Upper Structure Hydraulic System Fluid Capacity	145 gal (549 l)

Transmission

Max Speed - Forward	51 mph (81 kph)
Number of Forward Gears	13
Number of Reverse Gears	3
Transmission Type	Fuller Roadranger

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2024, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon