The Bobcat L95 is a compact wheel loader designed for material handling, loading, and site support tasks in construction, landscaping, agriculture, and municipal work. It features a diesel engine, articulated steering, and a front-mounted loader arm with a general-purpose bucket for moving soil, gravel, mulch, snow, and other bulk materials. The L95 is built for maneuverability in confined work areas while providing operator visibility and attachment versatility. Typical applications include loading trucks, stockpiling material, cleanup, and light grading. As a wheel loader, the Bobcat L95 is used where a balance of lift capacity, reach, and compact size is required.
Capacities
Bobcat L95 Wheel Loader Capacities specifications
Fuel Tank
20.80 gal (78.73 l) - Starting 2026
Dimensions
Bobcat L95 Wheel Loader Dimensions specifications
Articulation Angle
40 deg - Starting 2026
Dump Angle @ Maximum Height
45 deg - Starting 2026
Ground Clearance
13.30 in (33.78 cm) - Starting 2026
Height to Hinge Pin - Fully Raised
128.90 in (327.41 cm) - Starting 2026
Height with Operator Cab
99.30 in (252.22 cm) - Starting 2026
Length with Standard Bucket
220.20 in (559.31 cm) - Starting 2026
Length without Attachment
194.10 in (493.01 cm) - Starting 2026
Oscillation Angle
8 deg - Starting 2026
Outside Turning Radius
169.90 in (431.55 cm) - Starting 2026
Outside Turning Radius w/forks
180.80 in (459.23 cm) - Starting 2026
Rollback Angle
49 deg - Starting 2026
Tire Size
405/70 R20 - Starting 2026
Wheel Tread
55.10 in (139.95 cm) - Starting 2026
Wheelbase
82.70 in (210.06 cm) - Starting 2026
Width (over tires)
71.10 in (180.59 cm) - Starting 2026
Width (with bucket)
74.80 in (189.99 cm) - Starting 2026
Drive System
Bobcat L95 Wheel Loader Drive System specifications
Drive Type
Four-Speed hydrostatic with Advanced Attachment Control - Starting 2026
Engine
Bobcat L95 Wheel Loader Engine specifications
Engine Model
DM02-LEL16 - Starting 2026
Horsepower
74.00 hp (55.18 kw) - Starting 2026
Features
Bobcat L95 Wheel Loader Features specifications
4 way Flasher
Standard - Starting 2026
Advanced Attachment Control
Standard - Starting 2026
Air Ride Suspension Seat
Not Applicable - Starting 2026
Auxiliary Hydraulics
Standard - Starting 2026
Backup Alarm
Standard - Starting 2026
Built-In Tie Down & Crane/Lift Locations
Standard - Starting 2026
Cup Holder
Standard - Starting 2026
Enclosed Operator Cab with HVAC
Standard - Starting 2026
Engine Derate
Standard - Starting 2026
Front and Rear Work Lights
Standard - Starting 2026
Glow Plug Engine Pre-heat
Standard - Starting 2026
Grab Handles
undefined - Starting 2026
High Flow
Standard - Starting 2026
Horn
Standard - Starting 2026
Hour Meter
Standard - Starting 2026
Hydrostatic Transmission
Standard - Starting 2026
Joystick Control
Standard - Starting 2026
Keyed Ignition
Not Applicable - Starting 2026
Keyless Ignition
Standard - Starting 2026
Lift Arm Lockout With Manual Bypass
Standard - Starting 2026
Lift-Arm Support
Standard - Starting 2026
Mechanical Suspension Seat
Not Applicable - Starting 2026
OICS System (Interlock)
Standard - Starting 2026
Operator Canopy
Standard - Starting 2026
Power Bob-Tach
Standard - Starting 2026
Radio
Standard - Starting 2026
Rear View Camera
Standard - Starting 2026
Ride Control
Standard - Starting 2026
Road Lights
Standard - Starting 2026
Rotating Flashing Beacon
Optional - Starting 2026
Seat Belt
Standard - Starting 2026
Side Mirrors Right and Left
Standard - Starting 2026
Spark Arrestor Muffler
Standard - Starting 2026
Speedometer
Standard - Starting 2026
Suspension Seat
Standard - Starting 2026
Tilt and Telescoping Steering Wheel
Standard - Starting 2026
Travel Foot Pedal
Standard - Starting 2026
Turbocharged Engine
Standard - Starting 2026
Turn Signals
Standard - Starting 2026
Two Speed Travel
Standard - Starting 2026
Wheel Fenders
Standard - Starting 2026
Z-Bar Linkage
Standard - Starting 2026
Hydraulic System
Bobcat L95 Wheel Loader Hydraulic System specifications
