Case 621C XR Wheel Loader Specs

Category: Wheel Loaders ➔
Manufacturer: Case ➔
Model: 621C XR ➔

Bucket

Case 621C XR Wheel Loader Bucket specifications
Breakout Force	25,002.00 lbs (11,338.78 kg)
Bucket Capacity - Heaped	2.32 cu yd
Bucket Capacity - Struck	1.98 cu yd
Bucket Width	8.34 ft (2.54 m)
Dump Clearance At Max Raise	10.47 ft (3.19 m)

Dimensions

Case 621C XR Wheel Loader Dimensions specifications
Ground Clearance	1.40 ft (0.43 m)
Height	10.58 ft (3.23 m)
Height To Top Of Cab	10.70 ft (3.26 m)
Hinge Pin - Max Height	13.06 ft (3.98 m)
Length	23.00 ft (7.01 m)
Length With Bucket On Ground	22.97 ft (7.00 m)
Reach At Max Lift And Dump	3.00 ft (0.91 m)
Weight	27,091.00 lbs (12,288.29 kg)
Wheelbase	9.52 ft (2.90 m)
Width	8.00 ft (2.44 m)
Width Over Tires	7.98 ft (2.43 m)

Engine

Case 621C XR Wheel Loader Engine specifications
Aspiration	turbocharged
Displacement	359.00 cu in (5,882.97 cu cm)
Engine Make	2239
Engine Model	6T-590
Gross Power	139.00 hp (103.65 kw)
Max Torque	413.00 lbs ft (559.95 nm)
Net Power	130.00 hp (96.94 kw)
Number Of Cylinders	6
Power Measured @	2000 rpm
Torque Measured @	1400 rpm
Torque Rise	31 %

Hydraulic System

Case 621C XR Wheel Loader Hydraulic System specifications
Dump Time	1.5 sec
Lower Time	5 sec
Pump Flow Capacity	18.60 gpm (70.40 lpm)
Pump Type	dual, vane-type tandem
Raise Time	5.4 sec
Relief Valve Setting	2250 psi

Operational

Case 621C XR Wheel Loader Operational specifications
Alternator Supplied Amperage	65 amps
Cooling System Fluid Capacity	7.10 gal (26.87 l)
Engine Oil Fluid Capacity	4.00 gal (15.14 l)
Front Axle/Diff Fluid Capacity	5.50 gal (20.82 l)
Fuel Capacity	51.00 gal (193.04 l)
Hydraulic System Fluid Capacity	40.50 gal (153.29 l)
Operating Voltage	24 V
Operating Weight	27,091.00 lbs (12,286.17 kg)
Rear Axle Oscillation	24 degrees
Rear Axle/Diff Fluid Capacity	5.50 gal (20.82 l)
Static Tipping Weight	18,479.20 lbs (8,380.59 kg)
Tire Size	20.5-25 L3
Transmission Fluid Capacity	2.00 gal (7.57 l)
Turning Radius	17.10 ft (5.21 m)

Transmission

Case 621C XR Wheel Loader Transmission specifications
Max Speed - Forward	23.30 mph (37.50 kph)
Max Speed - Reverse	15.50 mph (24.94 kph)
Number Of Forward Gears	4
Number Of Reverse Gears	3
Transmission Type	4F/3R proportional w/ electronic control module torque sensing autoshift/manual shift and modulation

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon