Categories ↠ Wheel Loaders ↠ Case 621E XT

Case 621E XT Wheel Loader

Category: Wheel Loaders ➔
Manufacturer: Case ➔
Model: 621E XT ➔

Bucket

Breakout Force	24,298.00 lbs (11,021.40 kg)
Bucket Capacity - heaped	3.00 cu yd (2.29 cu m)
Bucket Capacity - struck	2.60 cu yd (1.99 cu m)
Bucket Width	8.60 ft (2.62 m)
Dump Clearance at Max Raise	9.20 ft (2.80 m)

Dimensions

Ground Clearance	1.30 ft (0.40 m)
Height - Top of Cab	11.20 ft (3.41 m)
Hinge Pin - Max Height	13.00 ft (3.96 m)
Length with Bucket on Ground	25.00 ft (7.62 m)
Reach at Max Lift and Dump	3.80 ft (1.16 m)
Wheelbase	9.60 ft (2.93 m)
Width Over Tires	8.30 ft (2.53 m)

Engine

Aspiration	Turbocharged and Aftercooled
Displacement	409.00 cu in (6,702.32 cu cm)
Engine Model	Family IV 667TA/EDB Tier III certified
Gross Power	156.00 hp (116.33 kw)
Make	Case
Net Power	146.00 hp (108.87 kw)
Number of Cylinders	6
Power Measured @	1800 rpm
Torque Measured @	1300 rpm
Torque Rise	33%

Hydraulic System

Dump Time	1.7 seconds
Lower Time	4.7 seconds
Pump Flow Capacity	45.20 gpm (171.08 lpm)
Pump Type	closed centered pressure/flow compensated
Raise Time	6.3 seconds
Relief Valve Setting	3600 psi

Operating Specifications

Alternator Supplied Amperage	65 amps
Cooling System Fluid Capacity	9.50 gal (35.96 l)
Engine Oil Fluid Capacity	3.50 gal (13.25 l)
Front Axle/Diff Fluid Capacity	5.90 gal (22.33 l)
Fuel Capacity	65.00 gal (246.03 l)
Hydraulic System Fluid Capacity	39.00 gal (147.62 l)
Operating Voltage	24 volts
Operating Weight	28,709.00 lbs (13,022.20 kg)
Rated Bucket Capacity	3.00 cu yd (2.29 cu m)
Rear Axle Oscillation	24 degrees
Rear Axle/Diff Fluid Capacity	5.90 gal (22.33 l)
Static Tipping Weight	23,376.00 lbs (10,603.19 kg)
Tire Size	20.5 R25
Transmission Fluid Capacity	5.00 gal (18.93 l)
Turning Radius	16.90 ft (5.15 m)

Transmission

Max Speed - Forward	24.00 mph (38.62 kph)
Max Speed - Reverse	15.60 mph (25.11 kph)
Number of Forward Gears	4
Number of Reverse Gears	3
Transmission Type	4F/3R Proportional w/ Electronic Control Module torque sensing autoshift/manual shift and modulation

Weights

Operating Weight

28,709.00 lbs (13,022.20 kg)

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon