Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
| Breakout Force | 28,046.00 lbs (12,721.47 kg) |
| Bucket Capacity - heaped | 3.00 cu yd (2.29 cu m) |
| Bucket Width | 8.90 ft (2.71 m) |
| Dump Clearance at Max Raise | 9.70 ft (2.96 m) |
| Ground Clearance | 1.20 ft (0.37 m) |
| Height - Top of Cab | 11.00 ft (3.35 m) |
| Hinge Pin - Max Height | 13.70 ft (4.18 m) |
| Length with Bucket on Ground | 26.00 ft (7.92 m) |
| Reach at Max Lift and Dump | 4.20 ft (1.28 m) |
| Wheelbase | 10.70 ft (3.26 m) |
| Width Over Tires | 8.60 ft (2.62 m) |
| Aspiration | turbocharged and air to air cooled |
| Displacement | 411.00 cu in (6,735.10 cu cm) |
| Engine Model | Family III 668TA/E2 |
| Gross Power | 181.00 hp (134.97 kw) |
| Net Power | 170.00 hp (126.77 kw) |
| Number of Cylinders | 6 |
| Power Measured @ | 2000 rpm |
| Torque Measured @ | 1300 rpm |
| Torque Rise | 24.8% |
| Dump Time | 1.9 seconds |
| Lower Time | 3.3 seconds |
| Pump Flow Capacity | 206.00 gpm (779.71 lpm) |
| Pump Type | closed centered pressure/flow compensated |
| Raise Time | 5.6 seconds |
| Relief Valve Setting | 3626 psi |
| Alternator Supplied Amperage | 70 amps |
| Cooling System Fluid Capacity | 9.80 gal (37.09 l) |
| Engine Oil Fluid Capacity | 3.80 gal (14.38 l) |
| Front Axle/Diff Fluid Capacity | 8.10 gal (30.66 l) |
| Fuel Capacity | 65.00 gal (246.03 l) |
| Hydraulic System Fluid Capacity | 51.10 gal (193.41 l) |
| Operating Voltage | 24 volts |
| Operating Weight | 31,574.00 lbs (14,321.74 kg) |
| Rear Axle Oscillation | 24 degrees |
| Rear Axle/Diff Fluid Capacity | 7.30 gal (27.63 l) |
| Static Tipping Weight | 27,615.20 lbs (12,526.06 kg) |
| Tire Size | 20.5x25 L3 |
| Transmission Fluid Capacity | 6.80 gal (25.74 l) |
| Turning Radius | 19.00 ft (5.79 m) |
| Max Speed - Forward | 23.60 mph (37.98 kph) |
| Max Speed - Reverse | 16.00 mph (25.75 kph) |
| Number of Forward Gears | 4 |
| Number of Reverse Gears | 3 |
| Transmission Type | 4F/3R proportional w/ electronic control module torque sensing autoshift/manual shift and modulation |