Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200
| Breakout Force | 36,391.00 lbs (16,506.70 kg) |
| Bucket Capacity - heaped | 3.60 cu yd (2.75 cu m) |
| Bucket Capacity - struck | 3.10 cu yd (2.37 cu m) |
| Bucket Width | 9.10 ft (2.77 m) |
| Dump Clearance at Max Raise | 9.80 ft (2.99 m) |
| Ground Clearance | 1.40 ft (0.43 m) |
| Height - Top of Cab | 11.00 ft (3.35 m) |
| Hinge Pin - Max Height | 13.00 ft (3.96 m) |
| Length with Bucket on Ground | 24.60 ft (7.50 m) |
| Reach at Max Lift and Dump | 3.70 ft (1.13 m) |
| Wheelbase | 10.50 ft (3.20 m) |
| Width Over Tires | 8.90 ft (2.71 m) |
| Aspiration | turbocharged and air to air cooled |
| Displacement | 504.00 cu in (8,259.10 cu cm) |
| Engine Model | 6TAA-8304 |
| Gross Power | 204.00 hp (152.13 kw) |
| Net Power | 186.00 hp (138.70 kw) |
| Number of Cylinders | 6 |
| Power Measured @ | 2000 rpm |
| Torque Measured @ | 1400 rpm |
| Torque Rise | 51% |
| Dump Time | 1.6 seconds |
| Lower Time | 4.3 seconds |
| Pump Flow Capacity | 50.00 gpm (189.25 lpm) |
| Pump Type | dual vane-type tandem |
| Raise Time | 5.9 seconds |
| Relief Valve Setting | 2813.8 psi |
| Alternator Supplied Amperage | 65 amps |
| Cooling System Fluid Capacity | 8.50 gal (32.17 l) |
| Engine Oil Fluid Capacity | 5.60 gal (21.20 l) |
| Front Axle/Diff Fluid Capacity | 8.80 gal (33.31 l) |
| Fuel Capacity | 70.80 gal (267.98 l) |
| Hydraulic System Fluid Capacity | 46.00 gal (174.11 l) |
| Operating Voltage | 24 volts |
| Operating Weight | 37,901.00 lbs (17,191.63 kg) |
| Rear Axle Oscillation | 24 degrees |
| Rear Axle/Diff Fluid Capacity | 7.10 gal (26.87 l) |
| Static Tipping Weight | 30,082.10 lbs (13,645.03 kg) |
| Tire Size | 23.5-25 L3 |
| Transmission Fluid Capacity | 3.20 gal (12.11 l) |
| Turning Radius | 18.90 ft (5.76 m) |
| Max Speed - Forward | 23.50 mph (37.82 kph) |
| Max Speed - Reverse | 16.60 mph (26.72 kph) |
| Number of Forward Gears | 4 |
| Number of Reverse Gears | 3 |
| Transmission Type | 4F/3R proportional w/ electronic control module torque sensing autoshift/manual shift and modulation |