Case 821E Wheel Loader Specs

Category: Wheel Loaders ➔
Manufacturer: Case ➔
Model: 821E ➔

Bucket

Case 821E Wheel Loader Bucket specifications
Breakout Force	34,416.00 lbs (15,608.16 kg)
Bucket Capacity - Heaped	4.43 cu yd
Bucket Capacity - Struck	3.78 cu yd
Bucket Width	9.60 ft (2.93 m)
Dump Clearance At Max Raise	9.72 ft (2.96 m)

Dimensions

Case 821E Wheel Loader Dimensions specifications
Ground Clearance	1.37 ft (0.42 m)
Height	11.33 ft (3.45 m)
Height To Top Of Cab	11.40 ft (3.47 m)
Hinge Pin - Max Height	13.51 ft (4.12 m)
Length	25.75 ft (7.85 m)
Length With Bucket On Ground	25.90 ft (7.89 m)
Reach At Max Lift And Dump	3.71 ft (1.13 m)
Weight	37,844.00 lbs (17,165.77 kg)
Wheelbase	10.98 ft (3.35 m)
Width	9.42 ft (2.87 m)
Width Over Tires	9.47 ft (2.89 m)

Engine

Case 821E Wheel Loader Engine specifications
Aspiration	Turbocharged and Aftercooled
Displacement	411.00 cu in (6,735.10 cu cm)
Engine Make	2239
Engine Model	Family IV, 667TA/EBD Tier III Certified
Gross Power	210.00 hp (156.60 kw)
Max Torque	724.00 lbs ft (981.60 nm)
Net Power	198.00 hp (147.65 kw)
Number Of Cylinders	6
Power Measured @	1800 rpm
Torque Measured @	1400 rpm

Hydraulic System

Case 821E Wheel Loader Hydraulic System specifications
Dump Time	1.2 sec
Lower Time	2.8 sec
Pump Flow Capacity	31.60 gpm (119.61 lpm)
Pump Type	closed centered pressure/flow compensated
Raise Time	5.6 sec
Relief Valve Setting	3600 psi

Operational

Case 821E Wheel Loader Operational specifications
Alternator Supplied Amperage	70 amps
Cooling System Fluid Capacity	110.80 gal (419.38 l)
Engine Oil Fluid Capacity	5.60 gal (21.20 l)
Front Axle/Diff Fluid Capacity	9.90 gal (37.47 l)
Fuel Capacity	76.00 gal (287.66 l)
Hydraulic System Fluid Capacity	46.00 gal (174.11 l)
Operating Voltage	24 V
Operating Weight	37,844.00 lbs (17,162.81 kg)
Rear Axle Oscillation	24 degrees
Rear Axle/Diff Fluid Capacity	6.30 gal (23.85 l)
Static Tipping Weight	31,376.00 lbs (14,229.48 kg)
Tire Size	23.5 x 25 l2 bias
Transmission Fluid Capacity	10.50 gal (39.74 l)
Turning Radius	19.80 ft (6.04 m)

Transmission

Case 821E Wheel Loader Transmission specifications
Max Speed - Forward	23.00 mph (37.01 kph)
Max Speed - Reverse	15.70 mph (25.27 kph)
Number Of Forward Gears	4
Number Of Reverse Gears	3
Transmission Type	4F/3R Proportional w/Electronic Control Module

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon