Case 921C Wheel Loader Specs

Category: Wheel Loaders ➔
Manufacturer: Case ➔
Model: 921C ➔

Bucket

Case 921C Wheel Loader Bucket specifications
Breakout Force	50,275.00 lbs (22,804.38 kg)
Bucket Capacity - heaped	4.80 cu yd (3.67 cu m)
Bucket Capacity - struck	3.90 cu yd (2.98 cu m)
Bucket Width	10.10 ft (3.08 m)
Dump Clearance at Max Raise	10.40 ft (3.17 m)

Dimensions

Case 921C Wheel Loader Dimensions specifications
Ground Clearance	1.50 ft (0.46 m)
Height - Top of Cab	11.80 ft (3.60 m)
Hinge Pin - Max Height	14.10 ft (4.30 m)
Length with Bucket on Ground	28.10 ft (8.56 m)
Reach at Max Lift and Dump	3.70 ft (1.13 m)
Wheelbase	11.20 ft (3.41 m)
Width Over Tires	9.70 ft (2.96 m)

Engine

Case 921C Wheel Loader Engine specifications
Aspiration	turbocharged and air to air cooled
Displacement	661.00 cu in (10,831.87 cu cm)
Engine Model	QSMII
Gross Power	270.00 hp (201.34 kw)
Net Power	248.00 hp (184.94 kw)
Number of Cylinders	6
Power Measured @	2100 rpm
Torque Measured @	1300 rpm
Torque Rise	41%

Hydraulic System

Case 921C Wheel Loader Hydraulic System specifications
Dump Time	1.5 seconds
Lower Time	4.9 seconds
Pump Flow Capacity	38.00 gpm (143.83 lpm)
Pump Type	dual vane-type tandem
Raise Time	6.2 seconds
Relief Valve Setting	2850 psi

Operating Specifications

Case 921C Wheel Loader Operating Specifications specifications
Alternator Supplied Amperage	70 amps
Cooling System Fluid Capacity	12.50 gal (47.31 l)
Engine Oil Fluid Capacity	9.80 gal (37.09 l)
Front Axle/Diff Fluid Capacity	16.90 gal (63.97 l)
Fuel Capacity	104.10 gal (394.02 l)
Hydraulic System Fluid Capacity	61.50 gal (232.78 l)
Operating Voltage	24 volts
Operating Weight	50,621.00 lbs (22,961.33 kg)
Rear Axle Oscillation	24 degrees
Rear Axle/Diff Fluid Capacity	16.90 gal (63.97 l)
Static Tipping Weight	43,305.50 lbs (19,643.07 kg)
Tire Size	26.5x25 L3
Transmission Fluid Capacity	7.60 gal (28.77 l)
Turning Radius	20.20 ft (6.16 m)

Transmission

Case 921C Wheel Loader Transmission specifications
Max Speed - Forward	24.10 mph (38.79 kph)
Max Speed - Reverse	16.60 mph (26.72 kph)
Number of Forward Gears	4
Number of Reverse Gears	3
Transmission Type	4F/3R proportional w/ electronic control module torque sensing autoshift/manual shift and modulation

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon