The Case 921G is a wheel loader designed for material handling, aggregate, construction, and loading applications. It is part of Case Construction Equipment's G Series and is built for productivity in demanding jobsite conditions. The 921G typically features a high-capacity bucket, articulated steering, and a powertrain configured for efficient loading and transport cycles. Common uses include stockpile work, truck loading, site preparation, and general earthmoving. The model is known for its operator-focused cab, hydraulic performance, and service access. Specifications may vary by configuration, attachment, and market, so exact operating weight, engine output, and bucket capacity should be verified by serial number and region.
General Specifications
Case 921G Wheel Loader General Specifications specifications
Bucket Capacity
4.75 (3.6) — Starting 2024 Model Year
Engine Power
242 (180) — Starting 2019 Model Year
Engine type
Case/FPT — Starting 2019 Model Year
Max Dump Height
9.8 (3) — Starting 2024 Model Year
Operating Weight
45,070 (20,443) — Starting 2019 Model Year
Brakes
Case 921G Wheel Loader Brakes specifications
Service brake
Wet Multi Disc
Bucket
Case 921G Wheel Loader Bucket specifications
Breakout Force
37,678.00 lbs (17,090.47 kg)
Bucket Capacity - heaped
4.80 cu yd (3.67 cu m)
Dump Clearance at Max Raise
9.20 ft (2.80 m)
Dimensions
Case 921G Wheel Loader Dimensions specifications
Bucket reach - fully raised, 45à ° dump
46.90 in (119.13 cm)
Dump height - fully raised, 45 degrees dump
114.70 in (291.34 cm)
Dump reach @ full height, 45 degrees dump
4.00 ft (1.22 m)
Ground Clearance
1.50 ft (0.46 m)
Height - Top of Cab
11.40 ft (3.47 m)
Hinge Pin - Max Height
13.60 ft (4.15 m)
Operating height - fully raised with spillgaurd
220.10 in (559.05 cm)
Overall length (L/bucket)
26.90 ft (8.20 m)
Overall width without bucket
111.40 in (282.96 cm)
Reach at Max Lift and Dump
5.80 ft (1.77 m)
Turning Radius Outside Tires
19.70 ft (6.00 m)
Wheelbase
11.00 ft (3.35 m)
Width Over Tires
9.30 ft (2.83 m)
Engine
Case 921G Wheel Loader Engine specifications
Alternator
120 amps
Displacement
411.00 cu in (6,735.10 cu cm)
Emissions
Tier 4
Engine Model
FPT F4HFE613R
Gross Power
255.00 hp (190.16 kw)
Make
Case
Max Torque
958.90 lbs ft (1,300.08 nm)
Net Power
225.00 hp (167.79 kw)
Number of Cylinders
6
Rated engine speed
2000 rpm
Torque Rise
49%
Hydraulic cycle times (unloaded)
Case 921G Wheel Loader Hydraulic cycle times (unloaded) specifications
Total cycle time
11.4 seconds
Hydraulic System
Case 921G Wheel Loader Hydraulic System specifications
Maximum system pressure
3625 psi
Pump Flow Capacity
42.80 gpm (162.00 lpm)
Pump Type
Piston
Steering pump type
Articulation
Operating Specifications
Case 921G Wheel Loader Operating Specifications specifications
Cooling System Fluid Capacity
8.00 gal (30.28 l)
DEF tank capacity
15.60 gal (59.05 l)
Front Axle/Diff Fluid Capacity
11.10 gal (42.01 l)
Fuel Capacity
76.10 gal (288.04 l)
Operating Voltage
24 volts
Operating Weight
45,069.10 lbs (20,443.03 kg)
Rated Bucket Capacity
4.80 cu yd (3.67 cu m)
Rear Axle Oscillation
24 degrees
Rear Axle/Diff Fluid Capacity
10.60 gal (40.12 l)
Transmission Fluid Capacity
9.10 gal (34.44 l)
Performance
Case 921G Wheel Loader Performance specifications
Bucket breakout force, SAE
35,272.60 lbs (15,999.40 kg)
Tipping Load
33,029.70 lbs (14,982.04 kg)
Transmission
Case 921G Wheel Loader Transmission specifications
Differential lock
F: Open / R: Open
Max Speed - Forward
22.80 mph (36.69 kph)
Number of Forward Gears
4
Number of Reverse Gears
3
Transmission Type
Powershift
Weights
Case 921G Wheel Loader Weights specifications
Operating Weight
45,070.00 lbs (20,443.43 kg)
×
Stay Ahead of the Market
Get weekly equipment news, auction updates, and dealer insights — trusted by thousands of industry professionals.
