Create a CEG Account  /  CEG Login
☰


Caterpillar 904H Wheel Loader Specs

The Caterpillar 904H Wheel Loader offers versatile performance with a bucket capacity of 1.3 cubic yards and a maximum reach of 7.9 feet. Powered by a turbocharged Mitsubishi engine delivering 52 horsepower, this loader boasts a hydraulic system with a pump flow capacity of 22 gallons per minute. With operating weights just under 10,000 pounds and a maximum speed of 12.5 mph, the 904H is equipped to handle a variety of tasks efficiently and effectively.


General Specifications

Caterpillar 904H Wheel Loader General Specifications specifications
1st 7 4 - Starting 2010
2nd 20 12 - Starting 2010
A Height to top of stack 67.00 in (1,714.00 mm) - Starting 2010
B Height to top of engine - compartment 61.00 in (1,545.00 mm) - Starting 2012
B Height to top of engine compartment 61.00 in (1,545.00 mm) - Starting 2010
Bore 3.46 in (88.00 mm) - Starting 2010
Breakout force (§) 7,648.00 lbf (34.00 kN) - Starting 2010
Bucket width 75.00 in (1,890.00 mm) - Starting 2010
C Height to top of ROPS 94.00 in (2,378.00 mm) - Starting 2010
D Hinge pin height at carry position 5.00 in (135.00 mm) - Starting 2010
Digging depth (§) 2.90 in (74.00 mm) - Starting 2010
Displacement 153.00 cu in (2.51 L) - Starting 2012
engine displacement 153 in3 mph (2.505 L km/h) - Starting 2010
Dump clearance at full lift and - 45° discharge angle 92.00 in (2,343.00 mm) - Starting 2010
Dump clearance at full lift and - F Hinge pin height at full lift 122.00 in (3,110.00 mm) - Starting 2010
Dump clearance at full lift and 45° discharge (§) 93.00 in (2,348.00 mm) - Starting 2010
Engine Model MHI S4Q2-T - Starting 2010
Flywheel Power: Net 52.00 hp (39.00 kW) - Starting 2010
Fuel Tank Capacity 22.00 US gal (83.00 L) - Starting 2010
G Maximum overall height 157.00 in (3,996.00 mm) - Starting 2010
Gross 55.00 hp (41.00 kW) - Starting 2010
Ground Clearance 11.00 in (287.00 mm) - Starting 2010
Ground clearance (std. tires) 11.00 in (287.00 mm) - Starting 2010
H Maximum digging depth 4.00 in (107.00 mm) - Starting 2010
Hydraulic Cycle Time, - Rated Load in Bucket - Dump 0.8 sec - Starting 2010
Hydraulic Cycle Time, - Rated Load in Bucket - Lower - (Empty, Float Down) 3.2 sec - Starting 2010
Hydraulic Cycle Time, - Rated Load in Bucket - Raise 4.5 sec - Starting 2010
Hydraulic Cycle Time, - Rated Load in Bucket - Total 8.5 sec - Starting 2010
Hydraulic System Capacity - (includes tank) 11.00 US gal (43.00 L) - Starting 2010
Hydraulic Tank Capacity 7.90 US gal (30.00 L) - Starting 2010
J Machine center point to axle 36.00 in (900.00 mm) - Starting 2010
K Wheel base 75.00 in (1,900.00 mm) - Starting 2010
L Free radius of tire 17.00 in (418.00 mm) - Starting 2010
Loader clearance circle with bucket in carry position 152.00 in (3,860.00 mm) - Starting 2010
M Maximum overall length 185.00 in (4,693.00 mm) - Starting 2010
N Reach at full lift 27.00 in (677.00 mm) - Starting 2010
No. Cylinders 4 - Starting 2010
O Maximum rollback at maximum lift 53.5 deg - Starting 2010
Operating weight 10,258.00 lbs (4,653.00 kg) - Starting 2010
Overall height with bucket at full raise (§) 156.00 in (3,949.00 mm) - Starting 2010
Overall length 187.00 in (4,726.00 mm) - Starting 2010
P Maximum rollback at carry height 48 deg - Starting 2010
Q Maximum rollback at ground 44.3 deg - Starting 2010
Rated bucket capacity (§) 1.31 cu yd (1.00 cu m) - Starting 2010
Rated Engine RPM 2400 rpm - Starting 2010
Reach at 45° discharge and 2130 mm (7'0") clearance (§) 38.00 in (952.00 mm) - Starting 2010
Reach at full lift and 45° discharge (§) 27.00 in (681.00 mm) - Starting 2010
Reach with lift arms horizontal and bucket level 75.00 in (1,907.00 mm) - Starting 2010
Speeds Forward - 1st 4.00 mph (7.00 km/h) - Starting 2012
Speeds Forward - 2nd 12.00 mph (20.00 km/h) - Starting 2012
Speeds Reverse - 1st 4.00 mph (7.00 km/h) - Starting 2012
Speeds Reverse - 2nd 12.00 mph (20.00 km/h) - Starting 2012
Static tipping load, full turn (§) 5,373.00 lbs (2,437.00 kg) - Starting 2010
Static tipping load, straight (§) 6,424.00 lbs (2,914.00 kg) - Starting 2010
Stroke 4.06 in (103.00 mm) - Starting 2010
Struck capacity (§) 0.97 cu yd (0.74 cu m) - Starting 2010
Tires used for measurements 12-16.5-10PR - Starting 2010
Tread Width 52.00 in (1,327.00 mm) - Starting 2010
Tread width (std. tires) 52.00 in (1,327.00 mm) - Starting 2010
Width Over Tires 65.00 in (1,642.00 mm) - Starting 2010
Width over tires (std. tires) 65.00 in (1,642.00 mm) - Starting 2010

Bucket

Caterpillar 904H Wheel Loader Bucket specifications
Bucket Capacity - Heaped 0.79 cu yd
Bucket Width 5.84 ft (1.78 m)
Dump Clearance At Max Raise 7.81 ft (2.38 m)

Buckets

Caterpillar 904H Wheel Loader Buckets specifications
Bucket Capacities 0.6 m3 - 1.0 m3 0.8 yd3 - 1.3 yd3

Cab

Caterpillar 904H Wheel Loader Cab specifications
Fops SAE J/ISO 3449 APR98 Level I and II; ISO 3449:1994 Level I and II
Rops SAE J1040 MAY94, ISO 3471:1994

Dimensions

Caterpillar 904H Wheel Loader Dimensions specifications
Ground Clearance 0.81 ft (0.25 m)
Height 7.75 ft (2.36 m)
Height To Top Of Cab 7.85 ft (2.39 m)
Hinge Pin - Max Height 10.21 ft (3.11 m)
Length 15.83 ft (4.83 m)
Length With Bucket On Ground 15.41 ft (4.70 m)
Reach At Max Lift And Dump 2.19 ft (0.67 m)
Weight 9,898.00 lbs (4,489.66 kg)
Wheelbase 6.24 ft (1.90 m)
Width 6.17 ft (1.88 m)
Width Over Tires 5.40 ft (1.65 m)

Engine

Caterpillar 904H Wheel Loader Engine specifications
Aspiration Turbocharged
Displacement 153.00 cu in (2,507.23 cu cm)
Eec 80/1269 Rating 52.00 hp (38.78 kw)
Engine Make 2236
Engine Model MHI S4Q2-T
Gross Power 55.00 hp (41.01 kw)
Iso 9249 Rating 52.00 hp (38.78 kw)
Net Power 52.00 hp (38.78 kw)
Number Of Cylinders 4
Power Measured @ 2400 rpm
Sae J1349 Rating 52.00 hp (38.78 kw)

Engine Dimensions

Caterpillar 904H Wheel Loader Engine Dimensions specifications
Bore 3.50 in (8.89 cm)
Displacement 153.00 cu in (2,507.23 cu cm)
Stroke 4.00 in (10.16 cm)

Hydraulic System

Caterpillar 904H Wheel Loader Hydraulic System specifications
3rd Valve Flow 22.00 gpm (83.27 lpm)
Dump Time 0.8 sec
Hydraulic Cycle Time - Dump 0.8 seconds
Hydraulic Cycle Time - Lift 4.5 seconds
Hydraulic Cycle Time - Lower, Float 3.2 seconds
Lower Time 3.2 sec
Main Relief 3000 psi
Pump Flow Capacity 22.00 gpm (83.27 lpm)
Raise Time 4.5 sec
Relief Valve Setting 3000 psi

Operating Specifications

Caterpillar 904H Wheel Loader Operating Specifications specifications
Breakout Force 8,003.00 lbs (3,630.10 kg)
Full Turn Static Tipping Load - Bucket 5,511.00 lbs (2,499.75 kg)
Rack Back - Transport Position 49 degrees
Rated Bucket Capacity 0.8 cu yd
Rated Operating Load At Full Turn - Bucket 2,756.00 lbs (1,250.10 kg)
Rated Operating Load At Full Turn - Forks (En 474-3:2006, Firm And Level Ground, 500 Mm [20 In] Load Center) (60% Of Ftstl) 2,646.00 lbs (1,200.21 kg)
Rated Operating Load At Full Turn - Forks (En 474-3:2006, Firm And Level Ground, 500 Mm [20 In] Load Center) (80% Of Ftstl) 3,527.00 lbs (1,599.82 kg)
Straight Tipping Load - Bucket 6,614.00 lbs (3,000.06 kg)
Tire Size 12-16.5, 10PR

Operational

Caterpillar 904H Wheel Loader Operational specifications
Alternator Supplied Amperage 90 amps
Cooling System Fluid Capacity 2.20 gal (8.33 l)
Engine Oil Fluid Capacity 2.00 gal (7.57 l)
Fuel Capacity 22.00 gal (83.27 l)
Hydraulic System Fluid Capacity 11.40 gal (43.15 l)
Operating Weight 9,898.80 lbs (4,490.03 kg)
Static Tipping Weight 6,613.90 lbs (3,000.02 kg)
Tire Size 12-16.5, 10PR

Service Refill Capacities

Caterpillar 904H Wheel Loader Service Refill Capacities specifications
Cooling System 2.00 gal (7.57 l)
Engine Oil 2.00 gal (7.57 l)
Fuel Tank 22.00 gal (83.27 l)
Hydraulic System 11.00 gal (41.64 l)

Transmission

Caterpillar 904H Wheel Loader Transmission specifications
Max Speed - Forward 12.50 mph (20.12 kph)
Max Speed - Reverse 12.50 mph (20.12 kph)
Number Of Forward Gears 2
Number Of Reverse Gears 2
Transmission Type Hydrostatic
Travel Speed 1 4.30 mph (6.92 kph)
Travel Speed 2 12.40 mph (19.96 kph)

Weights

Caterpillar 904H Wheel Loader Weights specifications
Operating Weight 9,900.00 lbs (4,490.57 kg)
×

Stay Ahead of the Market

Get weekly equipment news, auction updates, and dealer insights — trusted by thousands of industry professionals.