Caterpillar 907M Ag Handler Wheel Loader Specs

Buckets

Caterpillar 907M Ag Handler Wheel Loader Buckets specifications
Bucket Capacities	ISO Coupler - 0.75-1.2 m; SSL Style Coupler - 1.0-1.6 yd
Bucket Capacities - Iso Coupler	0.75-1.2 m
Bucket Capacities - Ssl Style Coupler	1.0-1.6 yd

Caterpillar 907M Ag Handler Wheel Loader Dimensions - With Iso Coupler - Approximate specifications
Articulation Angle	39 degrees
Clearance - Bucket At 45 Degrees	8.08 ft (2.46 m)
Clearance - Full Lift	9.92 ft (3.02 m)
Clearance - Level Arm	4.42 ft (1.35 m)
Clearance - Level Bucket	9.83 ft (3.00 m)
Departure Angle	33 degrees
Dig Depth	4.20 in (10.67 cm)
Dump Angle At Full Lift	45 degrees
Fork Dig Depth	3.10 in (7.87 cm)
Fork Reach At Full Lift	1.42 ft (0.43 m)
Height - Bucket Pin	10.50 ft (3.20 m)
Height - Ground Clearance	11.00 in (27.94 cm)
Height - Ground To Cab	8.33 ft (2.54 m)
Length - Overall With Bucket	17.68 ft (5.39 m)
Length - Overall With Forks	19.43 ft (5.92 m)
Length - Wheel Base	7.08 ft (2.16 m)
Note	Dimensions shown are based on the machine equipped with general purpose bucket and standard 340/80 R18, MX, XMCL tires.
Reach - Bucket At 45 Degrees	2.42 ft (0.74 m)
Reach - Ground	2.42 ft (0.74 m)
Reach - Level Arm	4.00 ft (1.22 m)
Turning Radius - Inside Tire	6.83 ft (2.08 m)
Turning Radius - Over Bucket	14.67 ft (4.47 m)
Width - Bucket	6.67 ft (2.03 m)
Width - Over Tires	6.00 ft (1.83 m)
Width - Tread Center	4.58 ft (1.40 m)

Caterpillar 907M Ag Handler Wheel Loader Dimensions - With Ssl Coupler - Approximate specifications
Articulation Angle	39 degrees
Clearance - Bucket At 45 Degrees	7.75 ft (2.36 m)
Clearance - Full Lift	10.17 ft (3.10 m)
Clearance - Level Arm	4.67 ft (1.42 m)
Clearance - Level Bucket	9.83 ft (3.00 m)
Departure Angle	33 degrees
Dig Depth	4.50 in (11.43 cm)
Dump Angle At Full Lift	43 degrees
Fork Dig Depth	0.20 in (0.51 cm)
Fork Reach At Full Lift	1.67 ft (0.51 m)
Height - Bucket Pin	10.50 ft (3.20 m)
Height - Ground Clearance	11.00 in (27.94 cm)
Height - Ground To Cab	8.33 ft (2.54 m)
Length - Overall With Bucket	18.18 ft (5.54 m)
Length - Overall With Forks	19.43 ft (5.92 m)
Length - Wheel Base	7.08 ft (2.16 m)
Note	Dimensions shown are based on the machine equipped with general purpose bucket and standard 340/80 R18, MX, XMCL tires.
Reach - Bucket At 45 Degrees	2.75 ft (0.84 m)
Reach - Ground	2.42 ft (0.74 m)
Reach - Level Arm	4.17 ft (1.27 m)
Turning Radius - Inside Tire	6.83 ft (2.08 m)
Turning Radius - Over Bucket	14.75 ft (4.50 m)
Width - Bucket	6.67 ft (2.03 m)
Width - Over Tires	6.00 ft (1.83 m)
Width - Tread Center	4.58 ft (1.40 m)

Caterpillar 907M Ag Handler Wheel Loader Engine specifications
Emissions	*The Cat C3.3B DIT engine meets U.S. EPA Tier 4 Final/EU Stage IIIB emission standards.
Maximum Gross Power	73.00 hp (54.44 kw)
Maximum Gross Power - Iso 14396	73.00 hp (54.44 kw)
Maximum Gross Power - Sae J1995	74.00 hp (55.18 kw)
Maximum Net Power - Iso 9249	69.00 hp (51.45 kw)
Maximum Net Power - Sae J1349	68.00 hp (50.71 kw)
Rated Net Power - 2,500 Rpm - Sae J1349	68.00 hp (50.71 kw)

Caterpillar 907M Ag Handler Wheel Loader Hydraulic System specifications
Hydraulic Cycle Time - Dump	1.3 seconds
Hydraulic Cycle Time - Lift	5.2 seconds
Hydraulic Cycle Time - Lower	3.2 seconds
Hydraulic Cycle Time - Rackback	2.1 seconds
Main Relief - 3rd Aux Flow	3400 psi
Main Relief - 3rd Aux Flow: High Flow	31.00 gpm (117.34 lpm)
Main Relief - 3rd Aux Flow: Standard	20.00 gpm (75.70 lpm)

Caterpillar 907M Ag Handler Wheel Loader Maximum Material Densities - General Purpose Bucket specifications
Bucket Width	80.00 in (203.20 cm)
Dump Height	97.00 in (246.38 cm)
Maximum Material Density	3031 lb/yd
Note	Based on ISO 7546:1983, and rated operating loads at full turn with 100% bucket capacity and SSL coupler.
Rated Capacity	1.2 cu yd

Caterpillar 907M Ag Handler Wheel Loader Maximum Material Densities - Light Material Bucket specifications
Bucket Width	82.00 in (208.28 cm)
Dump Height	85.00 in (215.90 cm)
Maximum Material Density	2363 lb/yd
Note	Based on ISO 7546:1983, and rated operating loads at full turn with 100% bucket capacity and SSL coupler.
Rated Capacity	1.6 cu yd

Caterpillar 907M Ag Handler Wheel Loader Maximum Material Densities - Multi Purpose Bucket specifications
Bucket Width	74.00 in (187.96 cm)
Dump Height	85.00 in (215.90 cm)
Maximum Material Density	3460 lb/yd
Note	Based on ISO 7546:1983, and rated operating loads at full turn with 100% bucket capacity and SSL coupler.
Rated Capacity	1 cu yd

Caterpillar 907M Ag Handler Wheel Loader Operating Specifications - Iso Coupler specifications
Breakout Force - Bucket	11,240.00 lbs ft (15,239.19 nm)
Full Turn Static Tipping Load - Bucket	8,038.00 lbs (3,645.98 kg)
Note	Machine with full fuel tank, ROPS/FOPS cab, 80 kg (176 lb) operator, ISO coupler and general purpose bucket (GP).
Rack Back - Transport Position	52 degrees
Rated Bucket Capacity	1.2 cu yd
Rated Operating Load At Full Turn - Bucket	4,019.00 lbs (1,822.99 kg)
Rated Operating Load At Full Turn - Forks (En 474-3:2006, Firm And Level Ground, 1.25 Stability And 500 Mm [20 In] Load Center)	5,226.00 lbs (2,370.48 kg)
Straight Tipping Load - Bucket	9,531.00 lbs (4,323.19 kg)
Tire Size	340/80 R18

Caterpillar 907M Ag Handler Wheel Loader Operating Specifications - Ssl Coupler specifications
Breakout Force - Bucket	8,983.00 lbs ft (12,179.15 nm)
Full Turn Static Tipping Load - Bucket	7,529.00 lbs (3,415.10 kg)
Note	Machine with full fuel tank, ROPS/FOPS cab, 80 kg (176 lb) operator, SSL coupler and general purpose bucket (GP).
Rack Back - Transport Position	53 degrees
Rated Bucket Capacity	1.2 cu yd
Rated Operating Load At Full Turn - Bucket	3,763.00 lbs (1,706.87 kg)
Rated Operating Load At Full Turn - Forks (En 474-3:2006, Firm And Level Ground, 1.25 Stability And 500 Mm [20 In] Load Center)	4,974.00 lbs (2,256.17 kg)
Straight Tipping Load - Bucket	8,946.00 lbs (4,057.84 kg)
Tire Size	340/80 R18

Caterpillar 907M Ag Handler Wheel Loader Operational specifications
Operating Weight	12,958.00 lbs (5,877.66 kg)

Caterpillar 907M Ag Handler Wheel Loader Weights specifications
Note	Machine with full fuel tank, ROPS/FOPS cab, 80 kg (176 lb) operator, skid steer loader coupler (SSL) and general purpose bucket (GP).
Operating Weight	12,958.00 lbs (5,877.66 kg)