Caterpillar 908M Ag Handler (2018) Wheel Loader Specs

Category: Wheel Loaders ➔
Manufacturer: Caterpillar ➔
Model: 908M Ag Handler (2018) ➔

Bucket

Caterpillar 908M Ag Handler (2018) Wheel Loader Bucket specifications
Bucket Capacities	ISO Coupler - 0.9-1.5 m; SSL Style Coupler - 1.2-2.0 yd
Bucket Capacities - ISO Coupler	0.9-1.5 m

Dimensions - With ISO Coupler - Approximate

Caterpillar 908M Ag Handler (2018) Wheel Loader Dimensions - With ISO Coupler - Approximate specifications
Dig Depth	5.70 in (14.48 cm)
Turning Radius - Inside Tire	6.70 ft (2.04 m)
Turning Radius - Over Bucket	14.70 ft (4.48 m)

Dimensions - With SSL Coupler - Approximate

Caterpillar 908M Ag Handler (2018) Wheel Loader Dimensions - With SSL Coupler - Approximate specifications
Dig Depth	6.00 in (15.24 cm)
Turning Radius - Inside Tire	6.70 ft (2.04 m)
Turning Radius - Over Bucket	14.80 ft (4.51 m)

Engine

Caterpillar 908M Ag Handler (2018) Wheel Loader Engine specifications
Emissions	*The Cat C3.3B DIT engine meets U.S. EPA Tier 4 Final/EU Stage IIIB emission standards.
Maximum Gross Power	73.00 hp (54.44 kw)
Maximum Gross Power - ISO 14396	73.00 hp (54.44 kw)
Maximum Gross Power - SAE J1995	74.00 hp (55.18 kw)
Maximum Net Power - ISO 9249	69.00 hp (51.45 kw)
Maximum Net Power - SAE J1349	68.00 hp (50.71 kw)
Rated Net Power - 2,500 rpm - SAE J1349	68.00 hp (50.71 kw)

Hydraulic System

Caterpillar 908M Ag Handler (2018) Wheel Loader Hydraulic System specifications
Hydraulic Cycle Time - Dump	1.3econds seconds
Hydraulic Cycle Time - Lift	5.2econds seconds
Hydraulic Cycle Time - Lower	3.2econds seconds
Hydraulic Cycle Time - Rackback	2.1econds seconds
Main Relief - 3rd Aux Flow	3400 psi
Main Relief - 3rd Aux Flow: High Flow	34.00 gpm (128.69 lpm)
Main Relief - 3rd Aux Flow: Standard	22.00 gpm (83.27 lpm)

Maximum Material Densities - General Purpose Bucket

Caterpillar 908M Ag Handler (2018) Wheel Loader Maximum Material Densities - General Purpose Bucket specifications
Bucket Width	81.00 in (205.74 cm)
Dump Height	110.00 in (279.40 cm)
Rated Capacity	1.40 cu yd (1.07 cu m)

Maximum Material Densities - Light Material Bucket

Caterpillar 908M Ag Handler (2018) Wheel Loader Maximum Material Densities - Light Material Bucket specifications
Bucket Width	81.00 in (205.74 cm)
Dump Height	111.00 in (281.94 cm)
Rated Capacity	2.00 cu yd (1.53 cu m)

Maximum Material Densities - Multi Purpose Bucket

Caterpillar 908M Ag Handler (2018) Wheel Loader Maximum Material Densities - Multi Purpose Bucket specifications
Bucket Width	81.00 in (205.74 cm)
Dump Height	110.00 in (279.40 cm)
Rated Capacity	1.20 cu yd (0.92 cu m)

Operating Specifications

Caterpillar 908M Ag Handler (2018) Wheel Loader Operating Specifications specifications
Operating Weight	14,402.00 lbs (6,532.65 kg)

Operating Specifications - ISO Coupler

Caterpillar 908M Ag Handler (2018) Wheel Loader Operating Specifications - ISO Coupler specifications
Breakout Force - Bucket	12,337.00 lbs ft (16,726.51 nm)
Full Turn Static Tipping Load - Bucket	8,789.00 lbs (3,986.63 kg)
Rack Back - Transport Position	51 degrees
Rated Bucket Capacity	1.50 cu yd (1.15 cu m)
Rated Operating Load at Full Turn - Bucket	4,396.00 lbs (1,993.99 kg)
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 1.25 Stability and 500 mm [20 in] Load Center)	5,719.00 lbs (2,594.10 kg)
Straight Tipping Load - Bucket	10,408.00 lbs (4,721.00 kg)
Tire Size	400/70 R20

Operating Specifications - SSL Coupler

Caterpillar 908M Ag Handler (2018) Wheel Loader Operating Specifications - SSL Coupler specifications
Breakout Force - Bucket	10,215.00 lbs ft (13,849.50 nm)
Full Turn Static Tipping Load - Bucket	8,766.00 lbs (3,976.20 kg)
Rack Back - Transport Position	51 degrees
Rated Bucket Capacity	1.50 cu yd (1.15 cu m)
Rated Operating Load at Full Turn - Bucket	4,385.00 lbs (1,989.01 kg)
Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 1.25 Stability and 500 mm [20 in] Load Center)	5,336.00 lbs (2,420.37 kg)
Straight Tipping Load - Bucket	10,399.00 lbs (4,716.91 kg)
Tire Size	400/70 R20

Service Refill Capacities

Caterpillar 908M Ag Handler (2018) Wheel Loader Service Refill Capacities specifications
Cooling System	4.50 gal (17.03 l)
Engine Oil	3.00 gal (11.36 l)
Fuel Tank	20.60 gal (77.97 l)
Hydraulic System	18.50 gal (70.02 l)

Travel Speeds

Caterpillar 908M Ag Handler (2018) Wheel Loader Travel Speeds specifications
High Speed	21.70 mph (34.92 kph)
Speed 1	6.20 mph (9.98 kph)
Speed 2	12.40 mph (19.96 kph)

Weights

Caterpillar 908M Ag Handler (2018) Wheel Loader Weights specifications
Note	Machine with full fuel tank ROPS/FOPS cab 80 kg (176 lb) operator skid steer loader coupler (SSL) and general purpose bucket (GP).
Operating Weight	14,402.00 lbs (6,532.65 kg)

Our Main Office

Construction Equipment Guide
470 Maryland Drive
Fort Washington, PA 19034
800-523-2200

About Us

Construction Equipment Guide covers the nation with its four regional newspapers, offering construction and industry news and information along with new and used construction equipment for sale from dealers in your area. Now we extend those services and information to the internet. Making it as easy as possible to find the news and equipment that you need and want.

Contents Copyrighted 2026, by Construction Equipment Guide, which is a Registered Trademark, registered in the U.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced (including framing) in whole or part without written permission from the publisher. All editorial material, photographs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyright purposes and are subject to Construction Equipment Guide’s unrestricted right to edit and comment editorially. Contributor articles do not necessarily reflect the policy or opinions of this publication.

Read our privacy policy here.
Mastodon